최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국세라믹학회지 = Journal of the Korean Ceramic Society, v.42 no.8 = no.279, 2005년, pp.537 - 541
Kim, Jong-Ho (Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology) , Kim, Young-Gu (Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology) , Kim, Do-Kyung (Samsung Electronics)
Silicon nitride is one of the most successful engineering ceramics, owing to a favorable combination of properties, including high strength, high hardness, low thermal expansion coefficient, and high fracture toughness. However, the impact damage behavior of
P. F. Becher, S. L. Hwang, H. T. Lin, and T. N. Tiegs, 'Tailoring of Mechanical Properties of $Si_{3}N_{4}$ Ceramics,' Kluwer Academic Publishers (1994)
B. R. Lawn, 'Indentation of Ceramics with Spheres: A Century after Hertz,' J. Am. Ceram. Soc., 81 [8] 1977-94 (1998)
S. K. Lee, K. S. Lee, B. R. Lawn, and D. K. Kim, 'Effect of Starting Powder on Damage Resistance of Silicon Nitrides,' J. Am. Ceram. Soc., 81 [8] 2061-70 (1998)
C. J. Shih, M. A. Meyers, V. F. Nesterenko, and S. J. Chen, 'Damage Evolution in Dynamic Deformation of Silicon Carbide,' Acta Mater., 48 [6] 2399-420 (2000)
D. K. Kim and C.-S. Lee, 'Indentation Damage Behavior of Armor Ceramics,' Proc of the Symposium on Ceramic Armor Materials by Design, PAC RIM 4 429-40 (2001)
D. K. Kim, C.-S. Lee, and Y.-G. Kim, 'Dynamic Indentation Damage of Ceramcis,' Proc of the Symposium on Ceramic Armor Materials by Design, PAC RIM 4 261-69 (2001)
D. K. Kim, J. H. Kim, Y.-G. Kim, C.-S. Lee, D.-T. Chung, C. W. Kim, J. H. Choi, and S.-N. Chang, 'Controlled Explosive Indentation on Ceramics,' Proc of the Ceramic Armor and Armor Systems Symposium, Annual Meeting of American Ceramic Society, 93-104 (2003)
J. H. Kim, Y.-G. Kim, D. K. Kim, K. S. Lee, and S.-N. Chang, 'Static and Dynamic Indentation Damage in SiC and $Si_{3}N_{4}$ ,' Key Eng. Mater., 287 [5] 410-15 (2004)
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration,' ASTM C1259-01 (2001)
G. R. Antis, P. Chantikul, D. B. Marshall, and B. R. Lawn, 'A Critical Evaluation of Indentation Technique for Measuring Fracture Toughness,' J. Am Ceram. Soc., 64 [9] 533-38 (1981)
F. Guiberteau, N. P. Padture, and B. R. Lawn, 'Effect of Grain Size on Hertzian Contact Damage in $Al_{2}O_{3}$ ,' J. Am. Ceram. Soc., 77 [7] 1825-31 (1994)
P. Lundberg, R. Renstrom, and B. Lundberg, 'Impact of Metallic Projectiles on Ceramic Targets : Transition between Interface Defeat and Penetration,' Int. J. Impact Eng., 24 [3] 259-75 (2000)
G. E. Hauver, P. H. Netherwood, R. F. Bench, and L. J. Kecskes, Proc 19th Army Symp. Solid Mech., Orlando, FL USA (1994)
D. T. Chung, C. Hwang, S. I. Oh, and Y. H. Yoo, 'A Study on the Dynamic Brittle Fracture Simulation,' The 4th Int. Symp. on Impact Eng., 16-8, Kumamoto, Japan (2001)
Z. Rozenberg and Y. Yeshurun, 'The Relation between Ballistic Efficiency and Compressive Strength of Ceramic Tiles,' Int. J. Impact Eng., 7 357-62 (1988)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.