최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.14 no.7 = no.79, 2005년, pp.619 - 623
강종훈 (발레오 전장 시스템㈜) , 고병호 (발레오 전장 시스템㈜) , 제진수 (경상대학교 수송기계공학부) , 강성수 (부산대학교 정밀기계공학과)
Lubrication and cooling characteristics are the most important factors of elevated temperature forging lubricants. Usually adopted lubricants in warm forging processes are graphite, synthetic and emulsion lubricants. Most widely and effectively applied lubricants are graphite lubricants, but these h...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
M. Knoerr, 1996, Fatigue failure of cold forging tooling : causes and possible solutions through fatigue analysis, JMPT. Vol.46, pp. 57-71
M.J.Liou, H.S. Hasiano, 1989, Prediction of die wear in high speed hot upset forging, ERC/NSM Report, No.99, pp. 33-39
J. H. Kang, 1999, A study on a die wear model considering thermal softening: (I) construction of the wear model, JMPT, Vol.96, pp. 53-58
J. H. Kang, 1999, A study on a die wear model considering thermal softening: (II) Application of the suggested wear model, JMPT, Vol. 94, pp. 183-188
S. Shaljaskow, 2001, Tool lubricating systems in warm forging, JMPT, Vol. 113, pp. 16-21
Schey, 1983, Tribology in Metalworking - friction, lubrication and wear, American society metals
D. J. Jeong, B. M, Kim, 2001, Effects of surface treatments and lubricants for warm forging die life, JMPT, Vol. 113, pp. 544-550
S. Sen, B. Aksakal, 2000, Transient and residual thermal stresses in quenched cylindrical bodies, Inter. J. Mech. Sci., Vol.42, pp. 2013-2029
J. U. Jang, 2002, FE Program development for predicting thermal deformation in heat treatment, JMPT, Vol.130, pp. 546-550
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.