최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.22 no.12 = no.177, 2005년, pp.198 - 204
김기대 (대구가톨릭대학교 기계자동차공학부) , 노병국 (한성대학교 기계시스템공학과) , 황경식 (한성대학교 기계시스템공학과 대학원)
For precise micro V-grooving, ultrasonic elliptical vibration cutting (UEVC) is proposed using two parallel piezoelectric actuators, which are energized by sinusoidal voltages with a phase difference of 90 degrees. Experimental setup is composed of stacked PZT actuators, a single crystal diamond cut...
Thoe, B., Aspinwall, K. and Wise, H., 'Review on Ultrasonic Machining,' Inernational Journal of Machine Tools and Manufacture, Vol.38, No.4, pp.239-255, 1998
Pei, Z. J. and Ferreira, P. M., 'An experimental investigation of rotary ultrasonic face milling,' International Journal of Machine Tools & Manufacture, Vol.39, pp.1327-1344, 1999
Wiercigroch, M., Neilson, R. D. and Player, M. A., 'Material removal rate prediction for ultrasonic drilling of hard materials using an impact oscillator approach,' Physics Letters A Vol.259, pp.91-96, 1999
Shamoto, E. and Moriwaki, T., 'Study on Elliptical Vibration Cutting,' Annals of the CIRP, Vol. 43, pp.35-38, 1994
Moriwaki, T.. and Shamoto, E., 'Ultrasonic Elliptical Vibration Cutting,' Annals of the CIRP, Vol. 44, pp.31-34,1995
Ma, C., Shamoto, E., Moriwaki, T. and Wang, L., 'Study of machining accuracy in ultrasonic elliptical vibration cutting,' International Journal of Machine Tools and Manufacture, Vol.44, pp.1305-1310, 2004
Lee, J., Lee, D., Jung, Y. and Chung, W., 'A Study on micro-grooving characteristics of planar lightwave circuit and glass using ultrasonic vibration cutting,' Journal of Materials Processing Technology, Vo1.130-131, pp. 396-400,2002
Cerniway, M.A., 'Elliptical Diamond Milling: Kinematics, Force and Tool Wear,' M.S. thesis, North Carolina State University, 2001
※ AI-Helper는 부적절한 답변을 할 수 있습니다.