최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.29 no.5 = no.236, 2005년, pp.554 - 560
이준희 (안동대학교 대학원 기계공학과) , 김희동 (안동대학교 기계공학부)
A new method to improve the efficiency of a hydrogen fuel cell system was introduced by using variable sonic/supersonic ejectors. To obtain the variable area ratio of the nozzle throat to ejector throat which controls the mass flow rate of the suction flow, the ejectors used a movable cylinder inser...
Keenan, J. H., Neumann, E. P. and Lustwerk, F., 1950, 'An Investigation of Ejector Design by Analysis and Experiment,' Journal of Applied Mechanics, Vol. 17, No. 3, pp. 299-309
Alperin, M. and Wu, J. J., 1983, 'Thrust Augmenting Ejector, Part 2,' AIAA Journal, Vol. 21, No. 12, pp. 1698-1706
Yang, T. T., Ntone, F., Jiang, T. and Pitts, D. R., 1985, 'An Investigation of High Performance, Short Thrust Augmenting Ejectors,' Jour. Fluids Eng., Vol. 107, pp. 23-30
Binder, G. and Didelle, H., 1975, 'Improvement of Ejector Thrust Augmentation by Pulsating or Flapping Jets,' 2nd Symposium on Jet Pumps & Ejectors and Gas Lift Techniques, Paper E2, pp. 15-26
Barankiewics, W. W., Perusek, G. P. and Ibrahim, M. B., 1994, 'Approximate Similarity Principle for a Full-Scale STOVL Ejector,' Journal of Propulsion and Power, Vol. 10, No. 2, pp. 198-203
Quinn, B., 1976, 'Ejector Performance at High Temperatures and Pressures,' Journal Aircraft, Vol. 13, No. 12, pp. 948-954
Francis, W. E., Hoggarth, M. L. and Templeman, J. J., 1972, 'The Design of Jet Pumps and Injectors for Gas Distribution and Combustion Purposes,' Symposium on Jet Pumps and Ejectors, BHRA Fluid Engineering-Institution of Chemical Engineers, London, England, No. 6, pp. 81-96
Lim, J. W. and Lee, S. H., 2000, 'Engine Room Cooling System Using Jet Pump,' Proceedings of the KSME 2000 Spring Annual Meeting B, pp. 162-167
Dutton, J. C. and Carroll, B. F., 1983, 'Optimized Ejector-Diffuser Design Procedure for Natural Gas Vapor Recovery,' Trans. of ASME, Journal of Energy Resources Technology, Vol. 105, pp. 388-393
Nagahiro, J., Iwamote, J. and Higuchi, K., 1992, 'Experiments for Fine Air Bubble Production in Liquids Using Ejectors,' Trans. American Society of Agricultural Engineers, Vol. 35, No. 5, pp. 1581-1590
Aiken, T. N., 1973, 'Aerodynamics and Noise Measurements on a Quasi-Two-Dimensional Augmenter Wing Model with Lose-Type Nozzles,' NASA TMX-62237, Sept.
Quinn, B., 1977, 'Interaction between Screech Tones and Ejector Performance,' J. Aircraft, Vol. 14, No. 5, pp. 467-473
Viets, H., Campbell, J. R. and Korkan, K. D., 1981, 'Acoustic Interactions in Ejectors,' AIAA Paper 81-2045, Oct.
Larminie, J. and Dicks, A., 2000, 'Fuel Cell Systems Explained,' John Wiley & Sons, Ltd., Chichester, pp. 246-247
Choi, B. G., Lee, Y. K., Kim, H. D. and Kim, D. J., 2000, 'Computations of the Supersonic Ejector Flows with the Second Throat,' Trans. of the KSME B., Vol. 24, No. 8, pp. 1128-1138
Oosthuizen, P. H. and Carscallen, W. E., 1997, 'Compressible Fluid FLow,' McGraw-Hill Book Co., pp. 192-195
Kim, H. D., 1998, 'Reduction of Normal Shock-Wave Oscillations by Turbulent Boundary Layer Flow Suction,' Trans. of the KSME B, Vol. 22, No. 9, pp. 1229-1237
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.