최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국수소 및 신에너지학회 논문집 = Transactions of the Korean Hydrogen and New Energy Society, v.16 no.3, 2005년, pp.229 - 237
이경호 (성균관대학교 기계공학부) , 권오채 (성균관대학교 기계공학부)
A new burner configuration for a compact fuel-cell reformer with a high-temperature air combustion concept was numerically studied. The burner was designed for a 40
A. Lokur1u, T. Grube, B. Hohlein, and D. Stolten: 'Fuel cells for mobile and stationary applications - cost analysis for combined heat and power stations on the basis of fuel cells', International Journal of Hydrogen Energy, Vol. 28, 2003, pp. 703-711
J. N. Armor: 'The Multiple Roles for Catalysis in the Production of H2', Applied Catalyst A: General, Vol. 176, No. 2, 1999, pp. 159-176
W. L. Yoon and D. S. Sea: 'Development of Compact NG steam Reforming System For H2-fueling Station' (in Korean), Workshop of Hydrogen Energy R&D Center, Vol.1, No.1, 2004, pp .3-7
F. J. Weinberg: 'Heat re-circulating burners: principles and some recent developments', Combustion Science and Technology, Vol. 121, 1996, pp. 3-22
H. Tsuji, A. K. Gupta, T. Hasegawa, M. Katsuki, K. Kishimoto, and M. Morita: 'High Temperature Air Combustion: from Energy Conservation to Pollution Reduction', CRC Press, New York, U.S.A., 2003, pp. 29-48
Fluent Inc., Fluent 6.0 User's Guide, December 2001
P. Cheng: 'Two-Dimensional Radiating Gas Flow by a Moment Method', AIAA Journal, Vol. 2, 1964, pp. 1662-1664
V. DuPont, M. Pourkashanian, and A. Williams: 'Modeling of Process Heaters Fired by Natural Gas', Journal of Institute of Energy, Vol. 73, 1993, pp 20-29
B. F. Magnussen and B. H. Hiertager: 'On Mathematical Models of Turbulent Combustion with Species Emphasis on Soot Formation and Combustion', Proceedings of the Combustion Institute, Vol. 16, 1976, pp. 719-729
J. P. Vandoormaal and G. D. Raithby: 'Enhancements of the SIMPLE Method for Predicting Incompressible Fluid Flows', Numerical Heat Transfer, Vol. 7, 1984, pp. 147-163
J. B. Claridge, A. P. E. York, A. J. Brungs, C. M. Alvarez, J. Sloan, S. C. Tsang, and M. L. H. Green: 'New Catalysts for the Conversion of Methane to Synthesis Gas: Molybdenum and Tungsten Carbide', Journal of Catalysis, Vol. 180, 1998, pp. 85-100
J. Pina, V. Bucala, and D. O. Borio: 'Optimization of Steam Reformers: Heat Flux Distribution and Carbon Formation', Internationa Journal of Chemical Reactor Engineering, Vol. 1, 2003, A25
M. U. Kang: 'A Study on Combustion Characteristics of the Self Regenerative Low NOx Burner', Master Degree Thesis, Seoul National University, Korea, 2003, pp. 4-10
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.