아미노실리케이트로 안정화한 금 콜로이드 용액으로부터 산화인듐주석(ITO) 위에 전해석출법으로 금 나노입자의 박막을 만들고, 이 박막을 순환 전압전류법(CV), 주사전자현미경법(SEM), 자외선-가시선 및 에너지분산 X-선 분광법(EDXS)으로 조사하였다. 박막 위 금 나노입자의 표면덮힘율은 1.2 나노몰/cm2였다. 금 박막을 0.10 M HClO4 용액에 든 0.1mM anthraquinone-2,6-disulfonic acid, disodium 염(AQDS) 용액에 20시간 이상 담가서 AQDS의 자체조립 단막층을 생성하였다. 그 결과 690 nm에서 다중층(AQDS/금박막/ITO)의 새로운 흡수 봉우리가 얻어졌다. 또한, +0.5V에서 -0.5V까지 전위를 변화시키는 시간전류법과 자외선-가시선 분광법으로 다중충의 표면 플라스몬 흡수를 측정하였다. 음의 전위를 걸어주었을 때 550 nm에서 나타나는 최대 표면 플라스몬 흡수띠가 감소하였다. 흡광도의 변화와 AQDS의 표면덮힘율과의 상관관계로부터 AQDS층의 유사용량 표면상태가 음전위를 걸어줄 때 플라스몬 띠의 에너지준위와 연관되어 있음을 알았다.
아미노실리케이트로 안정화한 금 콜로이드 용액으로부터 산화인듐주석(ITO) 위에 전해석출법으로 금 나노입자의 박막을 만들고, 이 박막을 순환 전압전류법(CV), 주사전자현미경법(SEM), 자외선-가시선 및 에너지분산 X-선 분광법(EDXS)으로 조사하였다. 박막 위 금 나노입자의 표면덮힘율은 1.2 나노몰/cm2였다. 금 박막을 0.10 M HClO4 용액에 든 0.1mM anthraquinone-2,6-disulfonic acid, disodium 염(AQDS) 용액에 20시간 이상 담가서 AQDS의 자체조립 단막층을 생성하였다. 그 결과 690 nm에서 다중층(AQDS/금박막/ITO)의 새로운 흡수 봉우리가 얻어졌다. 또한, +0.5V에서 -0.5V까지 전위를 변화시키는 시간전류법과 자외선-가시선 분광법으로 다중충의 표면 플라스몬 흡수를 측정하였다. 음의 전위를 걸어주었을 때 550 nm에서 나타나는 최대 표면 플라스몬 흡수띠가 감소하였다. 흡광도의 변화와 AQDS의 표면덮힘율과의 상관관계로부터 AQDS층의 유사용량 표면상태가 음전위를 걸어줄 때 플라스몬 띠의 에너지준위와 연관되어 있음을 알았다.
films of gold nanoparticles were formed on indium tin oxide (ITO) by an electrodeposition method from an aminosilicate stabilized gold colloid solution. The thin films were examined by cyclic voltammetry (CV), scanning electron microscopy (SEM), UV-visible, and energy dispersive X-ray spectroscopy (...
films of gold nanoparticles were formed on indium tin oxide (ITO) by an electrodeposition method from an aminosilicate stabilized gold colloid solution. The thin films were examined by cyclic voltammetry (CV), scanning electron microscopy (SEM), UV-visible, and energy dispersive X-ray spectroscopy (EDXS). The surface coverage of gold nanoparticles on the thin film was estimated to 1.2 nanomole/cm2. An anthraquinone-2, 6-disulfonic acid, disodium salt (AQDS) self-assembled layer was generated by immersing gold thin film into 1mM of AQDS in 0.1M HClO4 solution for over 20 hours. As a result, a new absorbance peak from the multi-layers (AQDS/thin film of gold /ITO) was obtained about at 690 nm. Also, the surface plasmon absorption of multi-layers was measured by UV-Visible spectrometer along with chronoamperometry by applying the various potentials from +0.5V to -0.5V. The maximum surface plasmon absorption band at 550 nm was decreased by applying negative potentials. The change of absorbance was correlated with the surface coverage of the AQDS indicating the pseudo-capacity surface state of the AQDS layer was coupled to the energy level of the plasmonband by applied negative potentials.
films of gold nanoparticles were formed on indium tin oxide (ITO) by an electrodeposition method from an aminosilicate stabilized gold colloid solution. The thin films were examined by cyclic voltammetry (CV), scanning electron microscopy (SEM), UV-visible, and energy dispersive X-ray spectroscopy (EDXS). The surface coverage of gold nanoparticles on the thin film was estimated to 1.2 nanomole/cm2. An anthraquinone-2, 6-disulfonic acid, disodium salt (AQDS) self-assembled layer was generated by immersing gold thin film into 1mM of AQDS in 0.1M HClO4 solution for over 20 hours. As a result, a new absorbance peak from the multi-layers (AQDS/thin film of gold /ITO) was obtained about at 690 nm. Also, the surface plasmon absorption of multi-layers was measured by UV-Visible spectrometer along with chronoamperometry by applying the various potentials from +0.5V to -0.5V. The maximum surface plasmon absorption band at 550 nm was decreased by applying negative potentials. The change of absorbance was correlated with the surface coverage of the AQDS indicating the pseudo-capacity surface state of the AQDS layer was coupled to the energy level of the plasmonband by applied negative potentials.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
제안 방법
The coverage of gold tfiin films on the ITO was evahiated by electrochemical measurement. The layer of AQDS on the gold tfiin film of ITO was formed by aself1 assembly, and tfie coverage ofAQDS calculated from electrochemical and spectroscopy measurements. The change ofsurface plasmon absorption ofm탾Itilayers was mea야ired with UV-Visible spectroscopy while varying applied potentials from +0.
, Palo Alto, CA). The surface of gold electrodes was examined by usmg Schottky Emission Scanning Electron Microscope (SEM) (S-4300 SE, Hitachi High - Technologies Corporation, Tokyo, Japan) which was mtegrated with Energy Dispersive X-ray Spectrometer (EDXS) (Gresham Sirius).
참고문헌 (26)
Peng, A. Z; Peng, X. J. Am. Chem. Soc. 2001, 123, 1389-1395
※ AI-Helper는 부적절한 답변을 할 수 있습니다.