최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국소음진동공학회논문집 = Transactions of the Korean society for noise and vibration engineering, v.16 no.11 = no.116, 2006년, pp.1165 - 1171
최민규 (인하대학교 대학원 기계공학부) , 구오흥 (인하대학교 대학원 기계공학부) , 윤보영 (인하대학교 대학원 기계공학부) , 최승복 (인하대학교 기계공학부)
This paper presents a new type of jetting dispenser for the integrated circuit (IC) fabrication and surface mount technology The proposed system is featured by the piezoelectric actuator and hydraulic magnification device. After describing structural component of the dispensing mechanism and its ope...
Dixon, D., et al., 1997, 'Practical Issues Concerning Dispensing Pump Technologies', Circuits Assembly, pp.36-40
Ness, C. Q. and Lewis, A. R, 1998, 'Adhesives/epoxies & Dispensing', Surf. Mount Technol.(SMT), pp.114-122
Wedekin, S., 2001, 'Micro Dispensing Comes of Age', Surf. Mount Technol.(SMT), pp.62-71
Chen, X. B. and Kai, J., 2004, 'Modeling of Positive-displacement Fluid Dispensing Processes', IEEE Transacion on Electronics Packaging Manufacturing, Vol.27, No.3. pp.157-163
Nasser, K., 2000, 'Development and Analysis of the Lumped-parameter Model of a Piezohydraulic Actuator', Master's thesis, Virginia Polytechnic Institute and State University
Hurst, W. E., 'Piezoelectric Actuator Design and Modeling Using a Lumped-parameter Approach', Master's thesis, Virginia Polytechnic Institute and State University
Nasser, K., Vujic, N., Leo, D. J. and Cudney, H. H., 2001, 'Modeling and Testing of a Piezohydraulic Actuation System', Proceedings of Smart Structures and Integrated Systems, Vol. 4327, No. 45, pp.354-365
White, F. M., 1999, Fluid Mechanics, MC Graw Hill
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.