AI 본문요약

엑셀 다운로드 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

참고문헌 (15)

1. Han, J. C., Zhang, Y M. and Kalkuehler, K., 1993, Uneven wall temperature effect on local heat transfer in a rotating two-pass square channel with smooth walls, ASME Journal of Heat Transfer, Vol. 115, pp.912-920 

   상세보기

2. Wagner, J. H., Johnson, B. V. and Kopper, F. C., 1991, Heat transfer in rotating serpentine passages with smooth walls, ASME J oumal of Turbomachinery , Vol. 113, pp. 321-330 

   상세보기

3. Mochizuki, S., Murata, A., Shibata, R. and Yang, W. J., 1999, Detailed measurement of local heat transfer coefficients in turbulent flow through smooth and rib-roughened serpentine passages with a 1800 sharp bend, Int. J. Heat and Mass Transfer, Vol. 42, pp. 1925-1934 

   상세보기

4. Liou, T. M., Chen, C. C. and Chen, M. Y, 2001, TLCT and LDV measurements of heat transfer and fluid flow in a rotating sharp turning duct, Int. J. Heat and Mass Transfer, Vol. 44, pp. 1777-1787 

   상세보기

5. Cho, H. H., Lee, S. Y, Won, J. H. and Rhee, D. H., 2004, Heat/mass transfer in two-pass rotating rectangular duct with and without 70 $^{\circ}$ -angled ribs, Heat and Mass Transfer, Vol. 40, pp.467-476 

   상세보기

6. Kim, K. M., Kim, Y. Y., Lee, D. H. and Cho, H. H., 2005, Effects of rotation speed on heat transfer and flow in a coolant passage with turning region (I)-Parallel Ribbed Duct, Transactions of KSME(B), Vol. 29, No.6, pp, 737-746 

7. Kim, K. M., Kim, Y Y, Lee, D. H. and Cho, H. H., 2005, Effects of rotation speed on heat transfer and flow in a coolant passage with turning region (II)-Parallel Ribbed Duct, Transactions of KSME(B) , Vol. 29, No.8, pp. 911-920 

   원문보기 상세보기

8. Fu, W. L., Wright, L. M. and Han, J. C., 2005, Heat transfer in two-pass rotating rectang- ular channels (AR 1:2 and 1:4) with smooth walls, ASME Journal of Turbomachinery Vol. 127, pp.255-277 

9. Prabhu, S. V. and Vedula, R. P., 2000, Pressure drop characteristics in a rotating smooth square channel with a sharp 180 $^{\circ}$ bend, Experimental Thermal and Fluid Science, Vol. 21, pp.198-205 

   상세보기

10. Prabhu, S. V. and Vedula, R. P., 2003, Pressure drop characteristics in a rib roughened rotating square duct with a sharp 180 $^{\circ}$ bend, Journal of Enhanced Heat Transfer, Vol. 10, No.4, pp. 363-377 

    상세보기

11. Astarita, T. and Cardone, G., 2000, Thermofluidynamic analysis of the flow in a sharp 1800 tum channel, Experimental Thermal and Fluid Science, Vol. 20, pp.188-200 

    상세보기

12. Krishnamoorthy, V. and Kumar, C. V. K., 2002, Effect of reynolds number on heat transfer in a rotating smooth square duct with radially outward flow, Proceeding of 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Paper No. HT-ABS-008 

13. McAdams, W. H., 1942, Heat Transmission, 2nd ed., McGraw-Hill, New York 

14. Kline, S. J. and McClintock, F. A., 1953, Describing uncertainty in single-sample experiments, Mechanical Engineering, Vol. 75, pp. 3-8 

15. Petukhov, B. S., 1970, Advances in Heat Transfer, Academic Press, New York, Vol. 6, pp. 503-564 

저자의 다른 논문 :

김경민 (24) 박석환 (6) 이동현 (18) 조형희 (134)