최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기윤활학회지 = Journal of the Korean Society of Tribologists and Lubrication Engineers, v.22 no.6, 2006년, pp.307 - 313
In this paper, a theoretical analysis is carried out to study the effect of viscosity variation with pressure in multiply grooved moving hydraulic spool valves. Analytical expressions for pressure distribution in the clearance and leakage flowrate are obtained solving one-dimensional Reynolds. For c...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Sweeney, D. C., 'Preliminary Ivnestigation of Hydraulie Lock,' Engineering, Vol.721, pp.513-516, 1951
Manhajm, J. and Sweeney, D. C., 'An Investigation of Hydraulic Lock,' Proc. of Instn. Mech. Engrs., Vol.169, pp.865-879, 1955
Mannam, J., 'Further Aspects of Hydraulic Lock,' Proc. of Instn. Mech. Engrs., Vol.731, pp.699-716, 1959
Meritt, H. E., Hydraulic Control Systems, John Wiley & Sons, 1967
Sweeney, D. C., 'Eight Ways to Overcome Hydraulic Lock,' Engineering, Vol. 190, pp.592-593, 1960
Kettleborough, C. F., 'The Effect of Pressure on Viscosity in Hydraulic Lock,' Int. J. Mech. Sci., Vol.3, pp.137-142. 1961
Hessey, M. F., Martin, B. P. and Brighton, D. K., 'Hydraulic Lock Forces on Tapered Pistons,' Proc. Instn. Mech. Engrs., Vol.184, pp.983-992, 1969-1970
Etsion, I. and Pinkus, O., 'The Hydrodynamics of a Plug Bearing,' J. of Lub. Tech., Vol.98, pp .433-440, 1976
Meikandan, N., Raman, R., Singaperumal, M. and Seetharamu, K. N., 'Theoretical Analysis of Tapered Pistons in High Speed Hydraulic Actuators,' Wear, Vol.137, pp .299-321, 1990
Lee, C. O. and Park, T. J., 'Querkrafte an hydraulischen Ventilen mit mehreren Umfangsnuten,' Olhydraulik und Pneumatik, Vol.34, pp.269-274, 1990
Park, T. J. and Lee, C.O., 'Hydrodynamic Lateral Force on a Tapered Piston Subjected to a Large Pressure Gradient,' Proc. of 3rd ICFP, pp.44-48, 1993
Sasaki, A. and Yamamoto, T., 'Review of Studies of Hydraulic Lock,' Lubrication Engineering, Vol.49, pp.585-593, 1993
Borghi, M., Cantore, G., Milani, M. and Paoluzzi, R., 'Numerical Analysis of the Lateral Forces Acting on Spools of Hydraulic Components,' Proc. of ASME, Int. Mech. Eng. Congress and Expo., Vol.5, pp.149-156, 1998
Borghli, M., 'Hydraulic Locking-in Spool-Type Valves : Tapered Clearances Analysis,' Proc. of IMechE, J. of Systems and Control Eng., Vol.215, pp.157-168, 2001
Milani, M., 'Designing Hydraulic Locking Balancing Grooves,' Proc. of IMechE, J of Systems and Control Eng., Vol.215, pp .453-465, 2001
박태조, 이정오, '그루브를 한 유압 피스톤펌프의 피스톤에 작용하는 측력의 해석,' 한국윤활학회지, 제8권 제8호, pp .44-49, 1992
이정오, 박태조, '피스톤 형상이 유압피스톤 펌프.모터의 윤활특성에 미치는 영향,' 한국윤활학회지, 제10권 제3호, pp .47-53, 1994
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.