최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기설비공학논문집 = Korean journal of air-conditioning and refrigeration engineering, v.18 no.1, 2006년, pp.38 - 46
황윤욱 (한국기계연구원 에너지기계연구센터) , 김주혁 (서울대학교 기계항공공학부) , 김민수 (서울대학교 기계항공공학부)
The characteristics about the pressure drop in microtubes have been investigated. The test tubes are the circular, seamless, stainless steel tubes with an inner diameter of 0.244, 0.430, and 0.792 mm, respectively. R-l34a was used as a test fluid. Early flow transition which has been reported in som...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Wu, P. and Little, W. A., 1983, Measurement of friction factors for the flow of gases in very fine channels used for microminiature Joule- Thomson refrigerators, Cryogenics, Vol. 23, pp. 273-277
Pfahler, J., Harley, J., Bau, H. H. and Zemel, J., 1990, Liquid transport in micron and submicron channels, J. Sensors and Actuators, Vol. 21, pp.431-434
Choi, S. B., Barron, R. F. and Warrington, R. O., 1991, Fluid flow and heat transfer in microtubes, Micromechanical Sensors, Actuators, and Systems, DSC- Vol. 32, pp. 123-134
Peng, X. F., Peterson, G. P. and Wang, B. X., 1994a, Frictional flow characteristics of water flowing through rectangular microchannels, Experimental Heat Transfer, Vol. 7, pp. 249-264
Yu, D., Warrington, R., Barron, R. and Ameel, T., 1995, An experimental and theoretical investigation of fluid flow and heat transfer in microtubes, ASME/JSME Thermal Eng. Conf., Vol. 1, pp.523-530
Peng, X. F. and Peterson, G. P., 1996, Forced convection heat transfer of single-phase binary mixtures through microchannels, Experimental Thermal and Fluid Science, Vol. 12, pp. 98-104
Mala, G. M. and Li, D., 1999, Flow characteristics of water in microtubes, Int. J. Heat and Fluid Flow, Vol. 20, pp. 142-148
Faghri, M. and Turner, S. E., 2003, Gas flow and heat transfer in microchannels, Proc. of SAREK Summer Annual Conference, June 2-4, Muju, Korea, pp. 542-550
Tu, X. and Hrnjak, P., 2003, Experimental investigation of single-phase flow pressure drop through rectangular microchannels, 1st International Conference on Microchannels and Minichannels, April 24-25, 2003, Rochester, New York, USA
Li, D. and Garimella, S. V., 2004, Investigation of liquid flow in microchannels, AIAA Journal of Thermophysics and Heat Transfer, Vol. 18, pp. 65-72
Moriyama, K., Inoue, A. and Ohira, H., 1992, The thermohydraulic characteristics of two-phase flow in extremely narrow channels (the frictional pressure drop and void fraction of adiabatic two-component two-phase flow), Trans. JSME (Ser. 8), Vol. 58, pp. 401-407
Lockhart, R. W. and Martinelli, R. C., 1949, Proposed correlation of data for isothermal two-phase two-component flow in pipes, Chem. Eng. Prog., Vol. 45, p. 39
Mishima, K. and Hibiki, T., 1996, Some characteristics of air-water two-phase flow in small diameter vertical tubes, Int. J. Multiphase Flow, Vol. 22, No. 4, pp. 703-712
Lee, H. J. and Lee, S. Y., 2001, Heat transfer correlation for boiling flows in small rectangular horizontal channels with low aspect ratios, Int. J. Multiphase Flow, Vol. 27, pp. 2043-2062
Coleman, H. W. and Steele, W. G., 1989, Experimentation and uncertainty analysis for engineers, John Wiley and Sons Inc
Obot, N. T., 2002, Toward a better understanding of friction and heat/mass transfer in microchannels - A literature review, Microscale Thermophysical Engineering, Vol. 6, pp. 155-173
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.