최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of mechanical science and technology, v.20 no.1, 2006년, pp.59 - 65
Hwang Jeong-Ki (School of Mechanical Engineering, Kyungpook National University) , Suh Chang-Min (School of Mechanical Engineering, Kyungpook National University) , Kim Chae-Ho (School of Mechanical Engineering, Kyungpook National University)
A half-scaled large test model for the main components of the real annular structure was built and the thermal behaviors were experimented and obtained by thermal cyclic loads. The model design and the test conditions for the thermal loads were determined to take into consideration the thermal and m...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
ANSYS, 2001, 'User's Manual,' ANSYS Inc.
Holman, J. P., 1986, Heat Transfer, Chapter 6, McGraw-Hill, New York
Hwang, J. K., Kim, I. Y. and Choi, T. S., 2004, 'Development of Permanent Reactor Cavity Seal Assembly for Operating Nuclear Power Plants,' Proceedings of the 2004 International Congress on Advances in Nuclear Power Plants, pp. 800-804, ICAPP'04, Pittsburgh, USA
Korea Electric Company, Final Safety Analysis Report - Kori Nuclear Power Plant Unit No.2, Chapter 3
Korea Electric Company, Preliminary Safety Analysis Report - Korea Nuclear Units 7 & 8, Chapter 3
Suh, C. M., Lee, J. J. and Kang, Y. G., 1990, 'Fatigue Microcracks in Type 304 Stainless Steel at Elevated Temperature,' Fatigue Fract. Engng. Mater. Struct., Vol. 13-5 : pp. 487-496
Suh, C. M., Lee, J. J., Kang, Y. G., Ahn, H. J. and Woo, B. C., 1992, 'A Simulation of the Fatigue Crack Process in Type 304 Stainless Steel at 538 C,' Fatigue Fract. Engng. Mater. Struct., Vol. 15-7, pp.671-684
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.