최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기구조물진단학회지 = Journal of the Korea Institute for Structural Maintenance Inspection, v.10 no.3 = no.37, 2006년, pp.143 - 151
유영준 (한국건설기술연구원) , 박지선 (한국건설기술연구원) , 박영환 (한국건설기술연구원) , 김형열 (한국건설기술연구원)
This paper presents the comparison of the goodness-of-fit test of analytical bond models between concrete and steel or GFRP reinforcements. Bond test specimens were prepared in accordance with the CSA codes and the rebars used in the test were steel and two types of commercial GFRP rebar products. U...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
?강금식, EXCEL 활용 현대 통계학, 박영사, 2003.
유영준, 박지선, 박영환, 유영찬, 김긍환, 김형열, "GFRP 보강근의 표면 형상과 거칠기에 따른 부착모델에 관한 연구," 봄학술발표 논문집, 한국구조물진단학회, 2005, pp. 61-66.
한국건설기술연구원, FRP 복합재료 보강재 개발 및 이를 활용한 콘크리트 구조물 건설기술 개발, 1차년도 최종보고서, 2004.
Alunno, Rosetti, V., Caleota, D., and Giammatteo, M. M., "Local bond stress-slip relationships of glass fibre reinforced plastic bars embedded in concrete," Mat. and Struct., Vol. 28, No. 180, 1995.
Burgoyne, C.J., "Should FRP be Bonded to Concrete?" International Symposium Fiber- Reinforced-Plastic Reinforcement for Concrete Structures, ACI SP-138, 1993.
Burong, Z. and Brahim, B., "Pullout Bond Properties of Fiber-Reinforced Polymer Tendons to Grout," Journal of Materials in Civil Engineering, Vol. 14, No. 5, 2002.
Comite Euro-International du Beton (CEB), CEB-FIP model code 1990, Bulletin d'information, Lausanne, Switzerland, 1991, pp.203-205.
Cosenza, E., Manfredi, G. and Realfonzo, R., "Analytical modeling of bond between FRP reinforcing bars and concrete," Non-Metallic (FRP) Reinforcement for Concrete Structures, Proc. 2nd International RILEM Symposium (FRPRCS-2), Taerwe L., editor, 1995, pp.165- 171.
Cosenza, E., Manfredi, G. and Realfonzo, R., "Behavior and Modeling of Bond of FRP Rebars to Concrete", Journal of Composites for Construction, Vol.1, No.2, 1997.
CSA Standard, Design and Construction of Building Components with Fibre-Reinforced Polymers, Canadian Standards Association, S806-02, 2002.
Eligehausen, R., Popov, E.P., and Bertero, V.V, "Local Bond Stress-Slip Relations of Deformed Bars Under Generalized Excitations." Rep. No. UCB/EERC 83/23, Earthquake Engineering Research Center, University of California, Berkeley, 1983.
Faoro, M., "Bearing and deformation behaviour of structural components with reinforcements comprising resin bounded glass fibre bars and conventional ribbed steel bars," Proc. Int. Conf. on Bond in Concrete, 1992.
JSCE, State-of-the-Art Report on Continuous Fiber Reinforcing Materials, Concrete Engineering series 3, Japan Society of Civil Engineers, Tokyo, 1993.
Makitani, E., Irisawa, I., and Nishiura, N., "Investigation of Bond in Concrete Member with Fiber Reinforced Plastic Bars," International Symposium Fiber-Reinforced-Plastic Reinforcement for Concrete Structures, ACI SP-138, 1993.
Malvar, L.J., "Bond Stress-Slip Characteristics of FRP Rebars," TR-2013-SHR Naval facilities engineering service center, Port Hueneme, CA., 1994.
Malvar, L.J., Cox, J.V. and Bergeron, C.K., "Bond between Carbon Fiber Reinforced Polymer Bars and Concrete. I: Experimental Study," Journal of Composites for Construction, Vol. 7, No. 2, 2003.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.