최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기유체기계저널 = Journal of fluid machinery, v.9 no.1 = no.34, 2006년, pp.25 - 31
박석환 (연세대학교 대학원 기게공학부) , 전윤홍 (연세대학교 대학원 기게공학부) , 김경민 (연세대학교 대학원 기게공학부) , 이동현 (연세대학교 대학원 기게공학부) , 조형희 (연세대학교 기계공학부)
The present study investigates the effects of bleed flow on heat/mass transfer and pressure drop in a rotating channel with transverse rib turbulators. The hydraulic diameter
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Douglas, T. and Philip, P., 2000, 'Experimental Heat Transfer and Bulk Air Temperature Measurements for a Multipass Internal Cooling Model with Ribs and Bleed,' ASME Paper No. 2000-GT-233
Ekkad, S. V., Huang, Y. and Han, J. C., 1996, 'Detailed Heat Transfer Distributions in Two-Pass Smooth and Turbulated Square Channels with Bleed Holes,' 1996 National Heat Transfer Conference, Vol. 8, pp. 133-140
Rigby, D. L., Steinthorsson, E. and Ameri, A. A., 1997, 'Numerical Prediction of Heat Transfer In a Channel with Ribs and Bleed,' ASME Paper No. 96-GT-431
Stephens, M. A., Shih, T. I. and Civinskas, K. C., 1995, 'Computation of Flow and Heat Transfer In a Rectangular Channel with Ribs,' AIAA Paper No. 95-0180
Taslim, M. E., Li, T. and Spring, S. D., 1995, 'Experimental Study of the Effects of Bleed Holes on Heat Transfer and Pressure Drop in Trapezoidal Passges with Tapered Turbulators,' Journal of Turbomachinery, Vol. 117, pp. 281-289
Byerley, A. R., Jones, T. V., and Ireland, P. T., 1992, 'Internal Cooling Passage Heat Transfer Near The Entrance To a Film Cooling Hole: Experimental and Computational Results,' ASME Paper No. 92-GT-241
Shen, J. R., Wang, Z., Ireland, P. T., Jones, T. V. and Byerley, A. R., 1996, 'Heat Transfer Enhancement Within a Combinations of Ribs With Film Cooling Holes,' Journal of Turbomachinary, Vol. 118, pp. 428-434
Kim, S. I., Kim, K. M., L, D. H., Jeon, Y. H., Cho, H. H., 2005, 'Change of Heat Transfer Characteristics In a Rotating Channel of Square Duct at Wall with Bleed Holes (I)', Proceeding of the SAREK Vol. 17, pp. 898-906
Kim, S. I., Kim, K. M., L, D. H., Jeon, Y. H., Cho, H. H., 2005, 'Change of Heat Transfer Characteristics In a Rotating Channel of Square Duct at Wall with Bleed Holes (II).' Proceeding of the SAREK Vol. 17, pp. 907-913
Cho, H. H., Kim, Y. Y., Kim, K. M. and Rhee, D. H., 2003, 'Effects of Rib Arrangements and Rotating Speed on Heat Transfer in a Two-Pass Duct,' ASME Paper No. GT-2003-38609
Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurement Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434
Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainty in Single -Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
McAdams, W. H., 1942, 'Heat Transmission, 2nd Edition,' McGraw-Hill, New York
Petukhov, B. S., 1970, Advances in Heat Transfer, 6, pp. 503-504, Academic Press, New York
Kukreja, R. T., Lau, S. C. and McMillin, R. D., 1993, 'Local Heat/ Mass Transfer Distribution in a Square Channel with Full and V - shaped Ribs,' Int. J. Heat Mass Transfer, 36, pp. 2013-2020
Agliga, D. A., 1994, 'Convective Heat Transfer Distributions over Plates with Square Ribs from Infrared Thermography Measurements,' Int. J. of Heat Mass Transfer, 36 (3), pp. 363-374
Acharya, S., Myrum, T., Qiu, X. and Sinha, S., 1997, 'Developing and Periodically Developed Flow, Temperature and Heat Transfer in a Ribbed Duct,' Int. J. of Heat Mass Transfer, 40, pp. 461-479
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.