최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회논문집 = Transactions of the Korean society of machine tool engineers, v.15 no.1, 2006년, pp.108 - 112
전유태 (한국산업기술대학교 지식기반기술에너지 대학원) , 현동훈 (한국산업기술대학교 나노광공학과)
A Study of birefringence in an aspheric lens of injection molding became more important to improve its optical properties. In the present study, the experimental study was carried out to investigate the relationship between birefringence and injection molded conditions. The processing factors are co...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Mazuda, K., Tamura, I., 1984, 'Injection & Compression Molding For Plastic Lens Fabrication,' 4th Japan RETEC
Lee, S., Javier, D. L. V., and Donald, C. B., 1986, 'residual Stresses and Birefringences in Large, Quenched Samples,' Journal of Applied Polymer Science, Vol. 31, pp. 2791-2803
Winberger, F., R. and De Bruin, J. G., 1993., 'Birefringence in Polycarbonate : Molecular Orientation Induced by Cooling Stress. I,' Journal of Polymer Science, Vol. 31, pp. 1041-1049
Winberger, F., R. and De Bruin, J. G., 1993, 'Birefringence in Polycarbonate : Molecular Orientation Induced by Cooling Stress. II,' Journal of Polymer Science, Vol. 31, pp. 1051-1060
Lee, Y. B., Kwon, T. H. and Yoon, K.H., 2002, 'Numerical Prediction of Residual Stresses and Birefringence in Injection/Compression Molded Center-Gated Disk,' Polym. Eng. Sci., Vol. 42
※ AI-Helper는 부적절한 답변을 할 수 있습니다.