최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.23 no.8 = no.185, 2006년, pp.154 - 162
김의수 (국립과학수사연구소) , 김상욱 (삼성전자 가전연구소) , 김병민 (부산대학교 기계공학부)
By laying its drum horizontally, front-loaded washing machine mostly used in Europe that uses the head of the water to launder was appropriate for washing only small amount of laundry. However, the demands of customers are requiring front-loaded washing machine to handle big capacity laundry as well...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Al-Bedoor, B. O., 'A Dynamic model of coupled ?shaft torsional and blade bending deformations in rotors,' Computer Methods in Applied Mechanics and Engineering, Vol. 169, No. 1-2, pp. 177-190, 1999
Khalid, Y. A, Mutasher, S. A, Sahari, B. B. and Hamouda, A. M. S., 'Bending fatigue behavior of hybrid aluminum/composite drive shafts,' Materials & Design, In Press, Corrected Proof, Available online 26 August 2005
Juuma, T., 'Torsional fretting fatigue strength of a shrink-fitted shaft with a grooved hub,' Tribology International, Vol. 33, No.8, pp. 537-543,2000
Savaidis, A., Savaidis, G. and Zhang, C., 'FE fatigue analysis of notched elastic-plastic shaft under multiaxial loading consisting of constant and cyclic components,' International Journal of Fatigue, Vol. 23, No.4, pp. 303-315, 2001
Das, G., Ray, A. K., Ghosh, S., Das, S. K. and Bhattacharya, D. K., 'Fatigue failure of a boiler feed pump rotor shaft,' Engineering Failure Analysis, Vol. 10, No. 6, pp. 725-732, 2003
Sackfield, A, Barber, J. R., Hills, D. A and Truman, C. E., 'A shrink-fit shaft subject to torsion,' European Journal of Mechanics - A/Solids, Vol. 21, No. 1, pp. 73-84, 2002
Fonte, M., Reis, L., Romeiro, E, Li, B. and Freitas, M., 'The effect of steady torsion on fatigue crack growth in shafts,' International Journal of Fatigue, In Press, Corrected Proof, Available online 28 November 2005
Shokrieh, M. M., Hasani, A. and Lessard, L. B., 'Shear buckling of a composite drive shaft under torsion,' Composite Structures, Vol. 64, No. 1, pp. 63-69,2004
Alonso Rasgado, M. T., Davey, K., Clark, L. D. and Hinduja, S., 'Boundary element stress analysis for bimetallic dies in pressure diecasting,' Journal of Materials Processing Technology, In Press, Corrected Proof, Available online 26 August 2005
※ AI-Helper는 부적절한 답변을 할 수 있습니다.