최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.23 no.9 = no.186, 2006년, pp.47 - 53
김병권 (건국대학교 대학원 기계설계학과) , 고성림 (건국대학교 기계설계학과)
An Experiment was carried out to find the scheme far minimization of burr formation on inclined exit surface in drilling. Several drills with different geometry are used for drilling the workpiece with inclined exit surface. Step drills are specified with step angle and step size. The influence of t...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Gillespie, L. K., 'De burring Precision Miniature Parts,' Precision Engineering, Vol. 1, No. 4, pp. 189-198, 1979
Ko, S. L. and Dornfeld, D., 'A Study on Burr Formation Mechanism,' Trans. of ASME, J. of Eng. For Materials and Technology, Vol. 113, pp. 75-87, 1991
Stein, J. and Dornfeld, D., 'Influence of Workpiece Exit Angle on Burr Formation in Drilling Intersecting Holes,' Trans. North American Manufacturing Research Institute, SME, Vol. 24, pp. 39-43, 1996
Kim, J., Dornfeld, D. A. and Furness, R., 'Experimental Study of Burr Formation in Drilling of Intersecting Holes With Gun Drill and Twist Drills,' Technical Papers of NAMRI/SME, pp. 39-44, 1999
Min, S. K., Dornfeld, D. A. and Nakao, Y., 'Influence of Exit Surface Angle on Drilling Burr Formation,' J. Manufacturing Science and Engineering, Vol. 125, No. 4, pp. 637-644, 2003
Ko, S. L., Jeon, K. B. and Lee, J. K., 'Analysis on Burr Formation in Drilling with New Concept Drill,' KSPE, Vol. 17, No.3, pp. 114-121,2000
Ko, S. L. and Chang, J. E., 'Development of Drill Geometry for Burr Minimization in Drilling,' Annals of the CIRP., Vol. 52, No.1, pp. 45-48, 2003
※ AI-Helper는 부적절한 답변을 할 수 있습니다.