최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.16 no.8 = no.98, 2007년, pp.590 - 595
허지향 (한국과학기술원 기계항공시스템학부) , 윤종헌 (한국과학기술원 기계항공시스템학부) , 바오이동 (한국과학기술원 기계항공시스템학부) , 허훈 (한국과학기술원 기계항공시스템학부)
This paper introduces a new approach to take account of bending history in finite element inverse analysis during sheet metal forming process. A modified membrane element was adopted for finite element inverse analysis so that bending-unbending energy was additionally imposed in the total plastic en...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
J. L. Batoz, Y. Q. Guo, P. Duroux, J. M. Detraux, 1989, On the estimation of thickness strain in thin car panels by the inverse approach, NUMIFORM89, pp. 383-388
J. L. Batoz, Y. Q. Guo, J. M. Detraux, 1990, An Inverse Finite Element Procedure to Estimate the Large Plastic Strain in Sheet Metal Forming, Proc. of 3rd ICTP, Vol.3, pp.1403-1408
K. Chung, O. Richmond, 1994, The mechanics of ideal forming, ASME trans: J. of Applied Mechanics, Vol. 61, pp. 176-181
S. D. Liu, M. Karima, 1992, A one step finite element approach for production design of sheet metal stampings, NUMIFORM92, pp. 497-502
조천수, 이충호, 허 훈, 1997, 유한요소 역 해석을 이용한 측대칭 다단계 박판성형에서의 공정변수 설계에 관한 연구, 한국소성가공학회지, 제 6 권, 제 4 호, pp. 301-310
C. H. Lee, H. Huh, 1998, Three dimensional multistep inverse analysis for the optimum blank design in sheet metal forming processes, J. Mater. Process. Technol., Vol. 80-81, pp. 76-82
J. L. Batoz, Y. Q. Guo, F. Mercier, 1997, The inverse approach with simple triangular shell elements for large strain predictions of sheet metal forming parts, Engineering Computations, Vol. 15, No. 7, pp. 864-892
X. Shi, Y. Wei, X. Ruan, 2001, Simulation of sheet metal forming by a one-step approach: choice of element, J. Mater. Process. Technol., Vol. 108, pp. 300-306
C. H. Lee, J. Cao, 2001, Shell element formulation of multi-step inverse analysis for axisymmetric deep drawing process, Int. J. Numer. Meth. Engng, Vol. 50, No.3, pp. 681-706
R. Hill, 1958, A general theory of uniqueness and stability in elasto-plastic solids, J. Mech. Phys. Solids, Vol.6, pp.236-249
H. Huh, S. S. Han, D. Y. Yang, 1994, Modified Membrane Finite Element Formulation considering Bending Effects in Sheet Metal Forming Analysis, Int. J. Mech. Sci., Vol.36, No.7, pp. 659-671
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.