최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.24 no.2 = no.191, 2007년, pp.134 - 139
Usually nanosecond pulsed laser processing of metal is mainly affected by the thermal ablation. Many studies of the theoretical analysis and modeling to predict the laser ablation of metal are suggested on the basis of the photothermal mechanism at higher laser fluence. In this paper, we investigate...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kim, J. G., Chang, W. S., Shin, B. S., Chang, J. W. and Whang, K. H., 'Blind via hole drilling using DPSS UV laser,' Journal of Korean Society of Laser Processing, Vol. 6, No. 1, pp. 9-16, 2003
Shin, B. S., Kim, J. G., Chang, W. S. and Whang, K. H., 'Rapid manufacturing of 3D micro products by UV laser ablation and phase change filling,' Journal of the Korean Society for Precision Engineering, Vol. 22, No. 11, pp. 196-201, 2005
Yoon, K. K., Lee, S. K., Kim, J. G., Shin, B. S., Choi, D. S., Whang, K. H. and Park, J. Y., 'Laser beam application and technology in micro machining,' Journal of the Korean Society for Precision Engineering, Vol. 17, No. 7, pp. 27-35, 2000
Shin, B. S., Yang, S. B., Chang, W. S., Kim, J. G. and Kim, J. M., 'Rapid manufacturing of 3D-shaped microstructures by UV laser ablation,' Journal of the Korean Society for Precision Engineering, Vol. 21, No. 7, pp. 30-36, 2004
Yoon, K. K. and Bang, S. Y., 'Modeling of polymer ablation with excimer lasers,' Journal of the Korean Society for Precision Engineering, Vol. 22, No. 9, pp. 60-68, 2005
Liu, Z. G., Song, H. W., Zheng, Z. H., Lu, S. Z., Yu, L. X. and Yang, L. M., 'Femtosecond laser induced photochemical reaction and configuration change of silver nanorod clusters in aqueous solution,' Colloids and Surfaces A: Physicochem. Eng. Aspects, Vol. 275, pp. 69-72, 2006
Hashida, M., Semerok, A. F., Gobert, O., Petite, G., Izawa, Y. and Wagner, J. F. 'Ablation threshold dependence on pulse duration for copper,' Applied Surface Science, Vol. 197-198, pp. 862-867, 2002
Mannion, P. T., Magee, J., Coyne, E., O'Connor, G. M. and Glynn, T. J., 'The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micromachining of common metals in air,' Applied Surface Science, Vol. 233, pp. 275-287, 2004
Srinivasan, V., Smrtic, M. A. and Babu, S. V., 'Excimer Laser Etching of Polymers,' Journal of Applied Physics, Vol. 59, No. 11, pp. 3861-3867, 1986
Chen, T. C. and Darling, R. B., 'Parametric studies on pulsed near ultraviolet frequency tripled Nd:YAG laser micromachining of sapphire and silicon,' Journal of Materials Processing Technology, Vol.169, pp.214-218, 2005
Tunna, L., Kearns, A., O'Neill, W. and Sutcliffe, C. J., 'Micromachining of copper using Nd:YAG laser radiation at 1064, 532, and 355 nm wavelengths,' Optics & Laser Technology, Vol. 33, pp. 135-143, 2001
Bauerle, D., Himmelbauer, M. and Arenholz, E., 'Pulsed laser ablation of polyimide: fundamental aspects,' Journal of Photochemistry and Photobiology A: Chemistry, Vol. 106, pp. 27-30, 1997
Zeng, D. W., Yung, K. C. and Xie, C. S., 'UV Nd:YAG laser ablation of copper: chemical states in both crater and halo studied by XPS,' Applied Surface Science, Vol. 217, pp. 170-180, 2003
※ AI-Helper는 부적절한 답변을 할 수 있습니다.