다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.24 no.4 = no.193, 2007년, pp.147 - 152
AI-Helper
UV laser ablation of polyimide is a combination of photochemical and photothermal mechanism. Photochemical mechanism is that molecular bonds are broken by photon energy and photothermal is evaporation and melt expulsion. When the laser processing, the etching depth needs to be calculated for predict...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kim, J. G., Chang, W. S., Shin, B. S., Chang, J. W. and Whang, K. H., 'Blind via hole drilling using DPSS UV laser,' Journal of Korean Society of Laser Processing, Vol. 6, No.1, pp. 9-16, 2003
Shin, B. S., Kim, J. G., Chang, W. S. and Whang, K. H., 'Rapid manufacturing of 3D micro products by UV laser ablation and phase change filling,' Journal of the Korean Society for Precision Engineering, Vol. 22, No. 11, pp. 196-201, 2005
Shin, B. S., Yang, S. B., Chang, W.S., Kim, J. G. and Kim, J. M., 'Rapid Manufacturing of 3D-Shaped Microstructures by UV Laser Ablation,' Journal of the Korean Society for Precision Engineering, Vol. 21, No.7, pp. 30-36, 2004
Bang, S. Y., 'Effects of beam parameters on excimer laser ablation,' Journal of the Korean Society for Precision Engineering, Vol. 22, No.7, pp. 38-46, 2005
Yoon, K. K. and Bang, S. Y., 'Modeling of polymer ablation with excimer lasers,' Journal of the Korean Society for Precision Engineering, Vol. 22, No.9, pp. 60-68, 2005
Srinivasan, V., Smrtic, M. A. and Babu, S. V., 'Excimer Laser Etching of Polymers,' Journal Applied Physics, Vol. 59, No. 11, pp. 3861-3867, 1986
Hauer, M., Funk, D. J., Lippert, T. and Wokaun, A., 'Laser ablation of polymers studied by nsinterferometry and ns-shadowgraphy measurements,' Applied Surface Science, Vol. 208-209, pp. 107-112, 2003
Luk'yanchuk, B., Bityurin, N., Himmelbauer, M. and Arnold, N., 'UV-laser ablation of polyimide: from long to ultra-short laser pulses,' Nuclear Instruments and Methods in Physics Research B: Beam Interactions with Materials and Atoms, Vol. 122, No. 3, pp. 347-355, 1997
Yung, K. C., Zeng, D. W. and Yue, T. M., 'High repetition rate effect on the chemical characteristics and composition of Upilex-S polyimide ablated by a UV Nd:YAG laser,' Surface and Coatings Technology, Vol. 160, No. 1, pp. 1-6, 2002
Yung, K. C., Liu, J. S., Man, H. C. and Yue, T. M., '355nm Nd:YAG laser ablation of polyimide and its thermal effect,' Journal of Materials Processing Technology, Vol. 101, No. 1, pp.306-311, 2000
Yung, K. C., Zeng, D. W. and Yue, T. M., 'XPS investigation of Upilex-S polyimide ablated by 355nm Nd:YAG laser irradiation,' Applied Surface Science, Vol. 173, No.3, pp. 193-202, 2001
Aguilar, C. A., Lu, Y., Mao, S. and Chen, S., 'Direct micro-patterning of biodegradable polymers using ultraviolet and femtosecond lasers,' Biomaterials, Vol. 26, No. 36, pp. 7642-7649, 2005
Bauerle, D., Himmelbauer, M. and Arenholz, E., 'Pulsed laser ablation of polyimide : fundamental aspects,' Journal of Photochemistry and Photobiology A: Chemistry, Vol. 106, No.1, pp. 2730, 1997
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.