최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.31 no.6 = no.261, 2007년, pp.710 - 717
송태광 (고려대학교 기계공학과) , 오창균 (한국전력기술㈜) , 김종성 (한국전력기술㈜) , 진태은 (한국전력기술㈜) , 김윤재 (고려대학교 기계공학과)
This paper presents plastic limit loads and approximate J-integral estimates for circumferential part-through surface crack at the interface between elbows and pipes. Based on finite element limit analyses using elastic-perfectly plastic materials, plastic limit moments under in-plane bending are ob...
Zahoor, A., 1991, 'Ductile Fracture Handbook,' Novotech Corp, USA
Kumar, V., and German, M. D., 1988, 'Elastic- Plastic Fracture Analysis of Through-Wall and Surface Flaws in Cylinder,' EPRI Report, NP-5596
Wilkowski, G., Ahmad, J., Brust, F., Ghadiali, N., Krishnaswamy, P., Landow, M., Marchall, C., and Scott, P., 1991, 'Short Cracks in Piping and Piping Welds,' NUREG/CR-4599, USNRC
2001, 'Assessment of the Integrity of Structures Containing Defects,' R6 Revision 4, British Energy
Miller, A.G., 1988, 'Review of Limit Loads of Structures Containing Defects,' International Journal of Pressure Vessels and Piping, Vol. 32, pp, 191-327
Kim, Y-J., Shim, D-J., Nikbin K, Kim Y-J., Hwang S-S., and Kim J-S., 2003, 'Fimite Element Based Plastic Limit Loads for Pipes with Part-Through Surface Cracks Under Combined Loading,' International Journal of Pressure Bessels and Pinping, 80, 527-540
Rahman, S., Brust, F., Ghadiali, N., and Wilkowski, G., 1998, 'Crack Opending Area Anlyses for Circumferential Through-Wall Cracks in Pipes-Part II:Model Validation,' International Journal of Pressure Vessels and Piping, Vol. 75, pp.375-396
Kim, Y-J., and Oh, C-S., 2006, 'Limit Loads for Pipe Bends Under Combined Pressure and in-Plane Bending Based on Finite Element Limit Analysis,' International Journal of Pressure Vessels and Piping, 83, 85-90
Kim, Y-J., Kim, Y-I., and Song, T-K., 2006, 'Finite Element Plastic Loads for Circumferential Cracked Pipe Bends Under in-Plane Bending,' Engineering Fracture Mechanics, Vol. 74, pp. 643-668
Ainsworth, R.A., 1984, 'The Assessment of Defects in Structures of Strain Hardening Materials,' Engineering Fracture Mechanics ,Vol.19, pp. 633-642
British Energy Generation Ltd., 2001, 'R6:Assessment of the Integrity of Structures Containing Defects,' Rivision 4
ABAQUS, 2003, 'ABAQUS Standard/User's Manual, Version 6.4,' Hibbit Karlsson & Sorensen, Inc., Pawtucket, RI, USA
Chattopadhyay J., Tomar A.K.S., Dutta B.K. and Kushwaha S, 2004, 'Limit Load of Throughwall Cracked Elbows : Comparison of Test Results with Theoretical Predictions,' Fatigue and Fracture of Engineering Materials and Structures, 27, pp. 1091-1103
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.