$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

모세관 리소그라피를 이용한 고종횡비 나노구조 형성법
Capillary-driven Rigiflex Lithography for Fabricating High Aspect-Ratio Polymer Nanostructures 원문보기

한국가시화정보학회지= Journal of the Korean society of visualization, v.5 no.1, 2007년, pp.3 - 8  

정훈의 (서울대학교 기계항공공학부) ,  이성훈 (서울대학교 기계항공공학부) ,  김필남 (서울대학교 기계항공공학부) ,  서갑양 (서울대학교 기계항공공학부)

Abstract AI-Helper 아이콘AI-Helper

We present simple methods for fabricating high aspect-ratio polymer nanostructures on a solid substrate by rigiflex lithography with tailored capillarity and adhesive force. In the first method, a thin, thermoplastic polymer film was prepared by spin coating on a substrate and the temperature was ra...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

후속연구

  • It was found that high AR polymer nanostructures (그20) and micro/nanoscale hierarchical structures could be fabricated with high-resolution PUA mold. It is hoped that this method could provide a versatile, economically viable route to fabrication of high AR nanostructures for mimicking various bioinspired functional surfaces.
본문요약 정보가 도움이 되었나요?

참고문헌 (32)

  1. Aimi, M.F., Rao, M.P., Macdonald, N.C., Zuruzi, A.S. and Bothman, D.P., 2004, "High-aspect-ratio bulk micromachining of titanium," Nature Materials, Vol.3(2), pp.103-105. 

  2. Jang, J.E. et al., 2005, "Nanoscale capacitors based on metal-insulator-carbon nanotube-metal structures," Appl. Phys. Lett., Vol.87(26), -. 

  3. Rangelow, I.W. and Biehl, S., 2001, "Fabrication and electrical characterization of high aspect ratio silicon field emitter arrays," J. Vac. Sci. Technol. B, Vol.19(3), pp.916-919. 

  4. Tan, J.L. et al., 2003, "Cells lying on a bed of microneedles: An approach to isolate mechanical force," P. Natl. Acad. Sci. USA, Vol.100(4), pp. 1484-1489. 

  5. Geim, A.K. et al., 2003, "Microfabricated adhesive mimicking gecko foot-hair," Nature Materials, Vol. 2(7), pp.461-463. 

  6. Sitti, M. and Fearing, R.S., 2003, "Synthetic gecko foot-hair micro/nano-structures as dry adhesives," J. Adhesion Science and Technology, Vol.17(8), pp. 1055-1073. 

  7. Yurdumakan, B., Raravikar, N.R., Ajayan, P.M. and Dhinojwala, A., 2005, "Synthetic gecko foot-hairs from multiwalled carbon nanotubes," Chemcal Communications Vol.(30), pp.3799-3801. 

  8. Madou, M.J., 2002, "Fundamentals of microfabrication : the science of miniaturization," CRC Press, Boca Raton, Fla. 

  9. Chou, S.Y., Krauss, P.R. and Renstrom, P.J., 1996, "Imprint lithography with 25-nanometer resolution," Science, Vol.272(5258), pp.85-87. 

  10. Xia, Y.N. and Whitesides, G.M., 1998, "Soft lithography," Annu. Rev. Mater. Sci., Vol.28, pp.153-184. 

  11. Hui, C.Y., Jagota, A., Lin, Y.Y. and Kramer, E.J., 2002, "Constraints on microcontact printing imposed by stamp deformation," Langmuir, Vol.18(4), pp.1394-1407. 

  12. Bietsch, A. and Michel, B., 2000, "Conformal contact and pattern stability of stamps used for soft lithography," J. Appl. Phys., Vol.88(7), pp.4310-4318. 

  13. Choi, S.J., Yoo, P.J., Baek, S.J., Kim, T.W. and Lee, H.H., 2004, "An ultraviolet-curable mold for sub- 100-nm lithography," J. Am. Chem. Soc., Vol.126 (25), pp.7744-7745. 

  14. Suh, D., Choi, S.J. and Lee, H.H., 2005, "Rigiflex lithography for nanostructure transfer," Adv. Mater., Vol.17(12), pp.1554-1560. 

  15. Jeong, H. E., Lee, S. H., Kim, P., Suh, K. Y., 2006, "Stretched polymer nanohairs by nanodrawing," Nano. Lett., Vol.6, pp.1508-1513. 

  16. Jeong, H. E., Lee, S. H., Kim, J. K., Suh, K. Y., 2006, "Nanoengineered multiscale hierarchical structures with tailored wetting properties," Langmuir Vol.22, pp.1640-1645. 

  17. Suh, K.Y., Choi, S.J., Baek, S.J., Kim, T.W. and Langer, R., 2005, "Observation of high aspect ratio nanostructures using capillary lithography," Adv. Mater., Vol.17, pp.560-564. 

  18. Stutzmann, N., Tervoort, T.A., Bastiaansen, K. and Smith, P., 2000, "Patterning of polymer-supported metal films by microcutting," Nature, Vol.407 (6804), pp.613-616. 

  19. Kim, C., Burrows, P.E. and Forrest, S.R., 2000, "Micropatterning of organic electronic devices by cold-welding," Science, Vol.288(5467), pp.831-833. 

  20. Choi, J.H., Kim, D., Yoo, P.J. and Lee, H.H., 2005, "Simple detachment patterning of organic layers and its application to organic light-emitting diodes," Adv. Mater., Vol.17(2), p.166-+. 

  21. Neinhuis, C. and Barthlott, W., 1997, "Characterization and distribution of water-repellent, self-cleaning plant surfaces," Ann. Bot-London, Vol.79(6), pp. 667-677. 

  22. Ball, P., 1999, "Engineering - Shark skin and other solutions," Nature, Vol.400(6744), p.507-+. 

  23. Feng, L. et al., 2002, "Super-hydrophobic surfaces: From natural to artificial," Adv. Mater., Vol.14(24), pp.1857-1860. 

  24. Arzt, E., Gorb, S. and Spolenak, R., 2003, "From micro to nano contacts in biological attachment devices," P. Natl. Acad. Sci. USA, Vol.100(19), pp. 10603-10606. 

  25. Zhao, N. et al., 2005, "Fabrication of biomimetic superhydrophobic coating with a micro-nano-binary structure," Macromol. Rapid. Comm., Vol.26(13), pp.1075-1080. 

  26. Erbil, H.Y., Demirel, A.L., Avci, Y. and Mert, O., 2003, "Transformation of a simple plastic into a superhydrophobic surface," Science, Vol.299(5611), pp. 1377-1380. 

  27. Lu, X.Y., Zhang, C.C. and Han, Y.C., 2004, "Lowdensity polyethylene superhydrophobic surface by control of its crystallization behavior," Macromol. Rapid. Comm., Vol.25(18), pp.1606-1610. 

  28. Xie, Q.D. et al., 2004, "Facile creation of a bionic super-hydrophobic block copolymer surface," Adv. Mater., Vol.16(20), p.1830-+. 

  29. Thangawng, A.L. and Lee, J., 2004, "Fabrication of micro/nano integrated roughened structure using nanosphere lithography (NSL)," 2004 ASME International Mechanical Engineering Congress. Proceedings of IMECE04, Anaheim, pp. 13-20. 

  30. Li, S.H. et al., 2002, "Super-hydrophobicity of largearea honeycomb-like aligned carbon nanotubes," J. Phys. Chem. B, Vol.106(36), pp.9274-9276. 

  31. Lau, K.K.S. et al., 2003, "Superhydrophobic carbon nanotube forests," Nano. Lett., Vol.3(12), pp.1701-1705. 

  32. Autumn, K. et al., 2000, "Adhesive force of a single gecko foot-hair," Nature, Vol.405(6787), pp.681-685. 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

FREE

Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로