최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.16 no.6 = no.96, 2007년, pp.467 - 472
이병호 (포스텍 신소재공학과) , 김용우 (포스텍 신소재공학과) , 박성혁 (포스텍 신소재공학과) , 이종수 (포스텍 신소재공학과)
In this study, the effects of initial texture on the twinning formation of AZ31 Mg rolled sheet was investigated. Uniaxial compression tests were carried out on samples cut along the normal direction(ND) and roiling direction(RD), respectively, of rolled AZ31 Mg alloy sheet at various temperatures (...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
S. S. Park, Y. S. Park, N. J. Kim, 2002, Microstructure and properties of strip cast AZ91 Mg alloy, Met. Mater. Int., Vol. 6, pp. 551-554
X. Y. Lou, M. Li, R. K. Boger, S. R. Agnew, R. H. Wagoner, 2007, Hardening evolution of AZ31B Mg sheet, Inter. Journal of Plasticity, Vol. 23, pp. 44-86
T. Obara, H. Yoshinaga, S. Morozumi, 1973, [11-22](11-23)slip system in magnesium, Acta Mater. Vol. 21, pp. 845-853
Y. N. Wang, J. C. Huang, 2007, The role of twinning and untwinning in yielding behavior in hot-extruded Mg-Al-Zn alloy, Acta Mater. Vol. 55, pp. 897-905
L. Jiang, J. J. Jonas, A. A. Luo, A. K. Sachdev, S. Godet, 2007, Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloy, Mater. Sci. Eng. Vol. 445-446, pp. 14-19
Robert E. Reed-Hill, R. Abbaschian: Physical Metallurgy Principles, PWS publishing company, Boston 1991
M. R. Barnett, Z. Keshavarz, A. G. Beer, D. Atwell, 2004, Influence of grain size on the compressive deformation of wrought Mg-3AI-1Zn, Acta Mater. Vol. 52, pp. 5093-5103
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.