최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국소음진동공학회논문집 = Transactions of the Korean society for noise and vibration engineering, v.18 no.12 = no.141, 2008년, pp.1243 - 1249
구동식 (경상대학교 대학원 정밀기계공학과) , 이정환 (경상대학교 대학원 정밀기계공학과) , 김병수 (경상대학교 대학원 정밀기계공학과) , 양보석 (부경대학교 기계공학부) , 최병근 (경상대학교 기계항공공학부, 해양산업연구소)
Gear system has been widely used in industrial applications and unexpected failures of gears are not only extremely damaging but also leading to economic losses. So, early detection of fault is important for diagnosis machine condition. And acoustic emission is an efficient non-destructive testing t...
Mba, D. and Raj B. K. N. Rao, 2006, 'Development of Acoustic Emission Technology for Condition Monitoring and Diagnosis of Rotating machines: Bearings, Pumps, Gearboxes, Engines, and Rotating Structures,' The Shock and Vibration Digest, Vol. 38, No. 1, pp. 3-16
Shiroishi, J., Li, Y., Liang, S., Kurfess, T. and Danyluk, S., 1997, 'Bearing Condition Diagnosis Via Vibration and Acoustic Emission Measurements,' Mechanical Systems and Signal Processing, Vol. 11, No. 5, pp. 693-705
Shiroishi, J., Li, Y., Liang, S., Danyluk, S. and Kurfess, T., 1999, 'Vibration Analysis for Bearing Outer Race Condition Diagnosis,' Journal of Brazil Society Mechanical Science, Vol. 21, No. 3, pp. 484-492
Kim, Y. H., Andy, C. C. Tan, Joseph, M., Vladis, K. and Yang, B. S., 2007, 'A Comparative Study on the Application of Acoustic Emission Technique and Acceleration Measurements for Low Speed Condition Monitoring,' Proceedings of the 12th Asia-Pacific Vibration Conference(APVC2007)
Berry, J. E., 1994, IRD Advancement Training Analysis II - Concentrated Vibration Signature Analysis and Related Condition Monitoring Techniques, IRD Mechanalysis, Inc., pp. 6-149-6-155
Signal Processing Toolbox User's Guide, Math Works, Inc., 1999
Randall, R. B, 1987, 'Frequency Analysis,' Bruel & Kjaer Book
Mba, D. and Bannister, R. H. and Findlay, G. E., 1999, 'Condition Monitoring of Low Speed Rotating Machinery Using Stress Waves : Part1 and Part2,' Proc. Inst. Mech. Eng. 213(3, Part E), pp. 153-185
Mba, D., 2001, 'The Detection of Shaft-seal Rubbing in Large-scale Turbines Using Acoustic Emission,' 14th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM'2001), Manchester, UK, 4-6 September 2001, pp. 21-28
Mba, D., Cooke, A., Roby, D. and Hewitt, G., 2003, 'Opportunities Offered by Acoustic Emission for Shaft-steal Rubbing in Power Generation Turbines : A Case Study,' International Conference on Condition Monitoring. Oxford, sponsored by the British Institute of NDT UK, pp. 280-286
Kim, Y. H., Andy, C. C. Tan, Joseph, M. and Yang, B. S., 2007, 'Experimental Study on Incipient Fault Detection of Low Speed Rolling Element Bearings : Time Domain Statistical Parameters,' 12th Asia-Pacific Vibration Conference(APVC2007)
Ronnie, K. M., Eric, V. K. H. and Patrick, O. M., 2005, Nondestructive Testing Handbook Volume 6 - Acoustic Emission Testing, American Socierty for Nondestructive Testing, Columbus
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.