트랙터부착 집재기를 이용한 집재작업 분석 -춘천집재기를 중심으로 - The Yarding Productivity and Cost of Cable Yarding Operation by Yarder Attached on Trator -Using the Chuncheon Tower-yarder -원문보기
본 연구에서는 춘천집재기를 이용한 집재작업에서의 집재작업생산성 및 비용을 분석하기 위해 낙엽송 간벌작업지 4개소에서 상향집재와 하향집재 작업으로 구분하여 조사를 실시하였다. 집재작업의 작업생산성을 예측하기 위한 평균 집재작업시간 추정식을 도출하였으며, 이를 이용하여 생산비용에 관여되는 인자들과 함께 집재작업 비용을 분석하였다. 춘천집재기를 이용한 집재작업 비용은 상향집재에서 12,844원/$m^3$, 하향집재에서는 13,221원/$m^3$으로 나타났다. 평균집재 작업시간은 상향집재시 239초, 하향집재시 274초로 나타났다. 상향집재시에는 가로집재가 가장 많은 부분(37%)을 차지한 반면, 하향집재에서는 집재시간이 평균집재시간에서 가장 높은 비율(46%)을 차지하였다. 이는 하향집재시 집재목 걸림현상이 상향집재보다 많이 발생하기 때문이다. 조사지에서의 작업 생산성은 하향집재 작업이 상향집재 작업보다 높은 것으로 나타났으나, 집재방향을 제외한 동일한 작업조건에서 비교하였을 경우 상향집재 작업이 하향집재 작업에 비해 생산성이 높은 것으로 나타났다.
본 연구에서는 춘천집재기를 이용한 집재작업에서의 집재작업생산성 및 비용을 분석하기 위해 낙엽송 간벌작업지 4개소에서 상향집재와 하향집재 작업으로 구분하여 조사를 실시하였다. 집재작업의 작업생산성을 예측하기 위한 평균 집재작업시간 추정식을 도출하였으며, 이를 이용하여 생산비용에 관여되는 인자들과 함께 집재작업 비용을 분석하였다. 춘천집재기를 이용한 집재작업 비용은 상향집재에서 12,844원/$m^3$, 하향집재에서는 13,221원/$m^3$으로 나타났다. 평균집재 작업시간은 상향집재시 239초, 하향집재시 274초로 나타났다. 상향집재시에는 가로집재가 가장 많은 부분(37%)을 차지한 반면, 하향집재에서는 집재시간이 평균집재시간에서 가장 높은 비율(46%)을 차지하였다. 이는 하향집재시 집재목 걸림현상이 상향집재보다 많이 발생하기 때문이다. 조사지에서의 작업 생산성은 하향집재 작업이 상향집재 작업보다 높은 것으로 나타났으나, 집재방향을 제외한 동일한 작업조건에서 비교하였을 경우 상향집재 작업이 하향집재 작업에 비해 생산성이 높은 것으로 나타났다.
This study was conducted to evaluate the productivity and the operational costs of the Chuncheon Tower-yarder, a skyline yarding system used in Korea. Detailed time study data were collected from 4 thinning sites in Japanese larch (Larix leptolepis) stands; one site for uphill yarding and three site...
This study was conducted to evaluate the productivity and the operational costs of the Chuncheon Tower-yarder, a skyline yarding system used in Korea. Detailed time study data were collected from 4 thinning sites in Japanese larch (Larix leptolepis) stands; one site for uphill yarding and three sites for downhill yarding. This study derived regression models to estimate the average cycle time (sec.) for uphill and downhill yarding. The average yarding cost was $12,844won/m^3$ for uphill yarding, while downhill yarding cost was $13,221won/m^3$. The average yarding time was 239 sec/cycle for uphill yarding, while downhill average yarding time was 274 sec/cycle. We found that uphill yarding productivity was higher when the operation system was examined under the same work conditions (i.e. standardized comparison) except yarding directions for both uphill yarding and downhill yarding.
This study was conducted to evaluate the productivity and the operational costs of the Chuncheon Tower-yarder, a skyline yarding system used in Korea. Detailed time study data were collected from 4 thinning sites in Japanese larch (Larix leptolepis) stands; one site for uphill yarding and three sites for downhill yarding. This study derived regression models to estimate the average cycle time (sec.) for uphill and downhill yarding. The average yarding cost was $12,844won/m^3$ for uphill yarding, while downhill yarding cost was $13,221won/m^3$. The average yarding time was 239 sec/cycle for uphill yarding, while downhill average yarding time was 274 sec/cycle. We found that uphill yarding productivity was higher when the operation system was examined under the same work conditions (i.e. standardized comparison) except yarding directions for both uphill yarding and downhill yarding.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.