참고문헌 (31)

1. Webb, R. L. and Jung, S. H., 1992, Air-side performance of enhanced brazed aluminum heat exchangers, ASHRAE Trans., Vol. 98, No. 2, pp. 391-410 

2. Webb, R. L. and Lee, H., 2001, Brazed aluminum heat exchangers for residential air-conditioning, J. Enhanced Heat Transfer, Vol. 8 pp. 1-14 

   상세보기

3. Davenport, C. J., 1980, Heat transfer and fluid flow in louvered triangular ducts, Ph.D thesis, Lanchester Polytechnic, U. K. 

4. Davenport, C. J., 1983, Correlation of heat transfer and flow friction characteristics of louvered fin, AIChE Symp. Ser. Vol. 79 pp. 19-27 

5. Achaichia, A. and Cowell, T. A., 1988, Heat transfer and pressure drop characteristics of flat tube and louvered plate fin surfaces, Exp. Thermal Fluid Science, Vol. 1 pp. 147-157 

   상세보기

6. Sunden, B. and Svantessen, J., 1992, Correlation of j and f factors for multi-louvered heat transfer surfaces, In：Proceedings of Third UK National Heat Transfer Conference, pp. 805-811 

7. Chang, Y. J. and Wang, C. C., 1996, Air-side performance of brazed aluminum heat exchangers, J. Enhanced Heat Transfer, Vol. 3, No. 1, pp. 15-28 

   상세보기

8. Kim, M. H. and Park, W. Y., 1998, Air-side heat transfer and pressure drop characteristics of louvered fin heat exchangers, Proceedings of the KSME '98 fall conference, pp. 123-128 

9. Sahnoun, A. and Webb, R. L, 1992, Prediction of heat transfer and friction for the louver fin geometry, J. Heat Transfer, Vol. 114 pp. 893-900 

   상세보기

10. Achaichia, A. and Cowell, T. A., 1988, A finite difference analysis of fully developed periodic laminar flow in inclined louvered arrays, In：Proceedings of Second UK National Heat Transfer Conference, Glassgow, pp. 883-888 

11. Hiramatsu, M., Ishimaru, T. and Matsuzaki, K., 1990, Research on fins for air-conditioning heat exchangers (first report, numerical analysis of heat transfer on louvered fins), JSME International Journal, Series II, Vol. 33, Paper No. 88-1254A 

12. Suga, K., Aoki, H. and Shingawa, T., 1990, Numerical analysis on two dimensional flow and heat transfer on louvered fins using overlaid grids, JSME International Journal, Vol. 33 pp. 122-127 

13. Achaichia, A., Heikal, M. Y., Sulaimna, Y. and Cowell, T. A., 1994, Numerical Investigation of flow and friction in louver fin arrays, In：Proceedings of the Tenth International Heat Transfer Conference, Vol. 4, pp. 333-338 

14. Tafti, D. K., Wang, G. and Lin, W., 2000, Flow transition in a multi-louvered fin array, Int. J. Heat Mass Transfer, Vol. 43 pp. 901-919 

    상세보기

15. Kang C. S. and Choi, T. M., 1993, A basic study on air flow characteristics in louvered fins, KSME J., Vol. 17, No. 5, pp. 1276-1293 

16. Lee, K. S., Jeon, C. D. and Lee, J. H., 1994, Study of flow structure and pressure drop characteristics in louvered-fin type heat exchanger, J. SAREK, Vol. 6, No. 2, pp. 140-154 

17. Park, B. S., Cho, J. H. and Han, C. S., 2001, Three dimensional analysis for the performance of the corrugated louver fin for a vehicle heat exchanger. Proceedings of SAREK 2001 summer conference, pp. 431-441 

18. Osada, H., Aoki, H., Ohara T. and Kuroyanagi, K., 1999, Experimental analysis for enhancing automotive evaporator fin performance, in Proceedings of the International Conference on Compact Heat Exchangers and Enhancement Technologies for the Process Industries, pp. 439-445 

19. Kim, M. H., Youn, B. and Bullard, C. W., 2001, Effect of inclination on the airside performance of a brazed aluminum heat exchanger under dry and wet conditions, Int. J. Heat Mass Transfer, Vol. 44 pp. 4613-4623 

    상세보기

20. Groehn, H. G., 1983, Heat transfer and flow resistance of yawed tube bundle heat exchangers, Heat Exchanger：Theory and Practice, Hemisphere, Washington, DC, pp. 299- 310 

21. Monheit M. and Freim, J., 1986, Effect of tube bank inclination on the thermal hydraulic performance of air cooled heat exchangers, in Proceedings of 8th Int. Heat Transfer Conf., pp. 2727-2732 

22. Chang, W. R., Wang, C. C. and Chang, Y. J., 1994, Effect of an inclination angle on the heat transfer and pressure drop characteristics of a wavy finned-tube heat exchanger, ASHRAE Trans., Vol. 100, No. 2, pp. 826-832 

    상세보기

23. ASHRAE Standard 41.1, 1986, Standard method for temperature measurement, ASHRAE 

24. ASHRAE Standard 41.2, 1987, Standard method for laboratory air-flow measurement, ASHRAE 

25. Gnielinski, V., 1976, New equations for heat and mass transfer in turbulent pipe flows, Int. Chem. Eng., Vol. 16, pp. 359-368 

26. Shah, R. K., 1985, Compact heat exchangers, in Handbook of Heat Transfer Applications, Rohsenow W. M. et al. eds., pp. 181-200 

27. Kays, W. M. and London, A. L., 1984, Compact Heat Exchangers, McGraw-Hill Books 

28. Webb, R. L., 1990, The flow structure in louvered fin heat exchanger geometry, SAE 900722 

29. Chang, Y. J. and Wang, C. C., 1997, A generalized heat transfer correlation for louver fin geometry, Int. J. Heat Mass Transfer, Vol. 40, No. 3, pp. 533-544 

    상세보기

30. Kim M. H. and Bullard, C. W., 2002, Air-side thermal hydraulic performance of multi-louvered fin aluminum heat exchangers, Int. J. Refrigeration Vol. 25 pp. 390-400 

    상세보기

31. Chang, Y. J., Hsu, K. C., Lin, Y. T. and Wang, C. C., 2000, A generalized friction correlation for louver fin geometry, Int. J. Heat Mass Transfer, Vol. 43 pp. 2237-2243 

    상세보기

저자의 다른 논문 :

김도영 (7) 조진표 (23) 김내현 (114) 황준현 (9)