목적: 현재 안경은 의료 도구와 패션 경향의 목적 등 사람의 신체에서 분리할 수 없는 필수품으로 인식되고 있다. 안경이 가지고 있는 특징 중 하나는 신체의 일부분에 반드시 착용 되어야 한다는 것이다. 이러한 특징은 안경테가 사용자의 편안한 착용감을 유지할 수 있는 조건으로 충족되어야 하며 이렇게 되기 위해서는 정확한 안경테 설계 기준이 마련되어야 한다. 사용자의 착용감 향상과 더불어 쾌적한 시야 확보를 위한 요소에 맞는 안경을 만들기 위해서는 안경 제조시 안경광학을 기초하는 기준이 마련되어야 하며 제조자의 감성에 의지하는 제조 방법으로는 올바른 안경테를 만들 수 없다. 부정확한 기준으로 만든 안경테는 안경 착용자의 눈에 원시나 근시, 난시등과 같은 치명적인 결과를 가져다 줄 수 있기 때문이다. 방법: 본 논문은 안경테 설계 중 가장 중요한 림(Rim) 설계를 안경 광학적 요소를 이용하여 자세하게 설명 하고 제조자와 안경광학 관련 종사자들이 정확한 사실을 인식 하고 인지 하 여 안경의 선택 및 제조 기준으로 삼을 수 있도록 할 것이다. 결과, 결론: 세계국제표준화기구(ISO) 에서 명시된 안경테의 명칭에 대하여 일부 안경테 제조업 종사자들의 잘못된 해석으로 많은 오류를 범하고 있는데 그 중 림(Rim) 과 연계 된 브리지(Bridge)에 관한 사항들을 바르게 해석하여 한국에서 제조하는 안경테들이 외국의 동종 제품과 경쟁하여 불리한 입장에 서지 않도록 해야 할 것이다.
목적: 현재 안경은 의료 도구와 패션 경향의 목적 등 사람의 신체에서 분리할 수 없는 필수품으로 인식되고 있다. 안경이 가지고 있는 특징 중 하나는 신체의 일부분에 반드시 착용 되어야 한다는 것이다. 이러한 특징은 안경테가 사용자의 편안한 착용감을 유지할 수 있는 조건으로 충족되어야 하며 이렇게 되기 위해서는 정확한 안경테 설계 기준이 마련되어야 한다. 사용자의 착용감 향상과 더불어 쾌적한 시야 확보를 위한 요소에 맞는 안경을 만들기 위해서는 안경 제조시 안경광학을 기초하는 기준이 마련되어야 하며 제조자의 감성에 의지하는 제조 방법으로는 올바른 안경테를 만들 수 없다. 부정확한 기준으로 만든 안경테는 안경 착용자의 눈에 원시나 근시, 난시등과 같은 치명적인 결과를 가져다 줄 수 있기 때문이다. 방법: 본 논문은 안경테 설계 중 가장 중요한 림(Rim) 설계를 안경 광학적 요소를 이용하여 자세하게 설명 하고 제조자와 안경광학 관련 종사자들이 정확한 사실을 인식 하고 인지 하 여 안경의 선택 및 제조 기준으로 삼을 수 있도록 할 것이다. 결과, 결론: 세계국제표준화기구(ISO) 에서 명시된 안경테의 명칭에 대하여 일부 안경테 제조업 종사자들의 잘못된 해석으로 많은 오류를 범하고 있는데 그 중 림(Rim) 과 연계 된 브리지(Bridge)에 관한 사항들을 바르게 해석하여 한국에서 제조하는 안경테들이 외국의 동종 제품과 경쟁하여 불리한 입장에 서지 않도록 해야 할 것이다.
Purpose: The objective of the study: At present, the spectacles, with its use as a medical aids or a fashion trimming, are recognized as one of the living necessities which can't be separated from human body. One of the features of spectacles is that it must be worn on any part of human body. Such a...
Purpose: The objective of the study: At present, the spectacles, with its use as a medical aids or a fashion trimming, are recognized as one of the living necessities which can't be separated from human body. One of the features of spectacles is that it must be worn on any part of human body. Such a feature has to be satisfied under the condition an user keeps feeling comfortable with the rim of spectacles worn. In order to ensure meeting this condition, a criterion has to be arranged for the design of the rim of spectacles. In order to manufacture a rim of spectacles which allows an user to secure a comfortable range of vision as well as enhancing the feeling when to be worn, a manufacturing standard has to be established based on optical science. No precise rim of spectacles could be made from the manufacturing method depending on the manufacturer's sensibility. When the rim of spectacles was manufactured according to the incorrect standards, it may cause an user such a fatal result as myopia, hyperopia or astigmatism. Methods: This study focuses on providing a detailed explanation about the design of rim, which is the most important element during designing a rim of spectacles, making use of the optical elements of spectacles, and helping the manufacturers and the people who work in the spectacles-related business understand and recognize what is correct and exact and then leading them to establish a standard in respect to the manufacture and selection of spectacles. Results, Conclusions: Considering the fact there happen many errors in relation with the names of rim stipulated in the provisions of International Standards Organization (ISO), due to wrong interpretation by some of the rim manufacturers, the right interpretation should be given about the bridge which is directly connected to rim, so that the rims of spectacles manufactured in Korea could keep a favorable position in competing with the foreign products of same kinds.
Purpose: The objective of the study: At present, the spectacles, with its use as a medical aids or a fashion trimming, are recognized as one of the living necessities which can't be separated from human body. One of the features of spectacles is that it must be worn on any part of human body. Such a feature has to be satisfied under the condition an user keeps feeling comfortable with the rim of spectacles worn. In order to ensure meeting this condition, a criterion has to be arranged for the design of the rim of spectacles. In order to manufacture a rim of spectacles which allows an user to secure a comfortable range of vision as well as enhancing the feeling when to be worn, a manufacturing standard has to be established based on optical science. No precise rim of spectacles could be made from the manufacturing method depending on the manufacturer's sensibility. When the rim of spectacles was manufactured according to the incorrect standards, it may cause an user such a fatal result as myopia, hyperopia or astigmatism. Methods: This study focuses on providing a detailed explanation about the design of rim, which is the most important element during designing a rim of spectacles, making use of the optical elements of spectacles, and helping the manufacturers and the people who work in the spectacles-related business understand and recognize what is correct and exact and then leading them to establish a standard in respect to the manufacture and selection of spectacles. Results, Conclusions: Considering the fact there happen many errors in relation with the names of rim stipulated in the provisions of International Standards Organization (ISO), due to wrong interpretation by some of the rim manufacturers, the right interpretation should be given about the bridge which is directly connected to rim, so that the rims of spectacles manufactured in Korea could keep a favorable position in competing with the foreign products of same kinds.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
제안 방법
문제는 안경테 제조업체들이 안경테 생산 초기에 사용되었던 유리렌즈의 매질의 값을 이용한 림의 반지름을 적용하여 림 (Rim) 을 디자인 하였다. 그러나 현재는 전자에 언급한 플라스틱 렌즈를 많이 사용하는데 Table 1과 같이 렌즈 제조회사마다 조금의 수치 차이는 있지만 대체적으로 5~6 디옵터 커브를 사용하고 렌즈 매질의 값을 1.
한국 내에서 가장 많이 판매되는 렌즈 회사별 제품의 종류를 렌즈 매질의 값을 기준으로 하여 나열하였으며 디옵터 커브와의 관계에서 발생하는 렌즈의 반지름 값을 표현하였다.
후속연구
따라서 렌즈 매질 값에 따른 디옵터 커브와 반지름의 길이를 정확히 확인하고 안경테의 림 (Rim) 을 디자인 해야 할 것이다.
이것을 바탕으로 한국의 안경산업은 기존에 가지고 있는 안경제조 및 디자인 기술을 이용하여 다시 재건되어야 하며 한국 안경 산업의 르네상스 시대로 전환되어야 할 것이다. 이렇게 되기 위해서는 기존의 구태 의연하고 감성적 제조 방법을 탈피해야 하고 본 논문에서 밝히고 있는 논리적인 디자인 방법에 의거하여 적용시켜 안경테 설계를 이루어 나아가야 한다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.