최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.25 no.5 = no.206, 2008년, pp.34 - 42
장정환 (경상대학교 기계항공공학부, K-MEM R&D Cluster) , 우에마쯔세이조 , 조성현 (경상대학교 기계항공공학부, K-MEM R&D Cluster) , 김준성 (경상대학교 기계항공공학부, K-MEM R&D Cluster) , 류성기 (경상대학교 기계항공공학부, K-MEM R&D Cluster)
초록이 없습니다.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Ford Motor Co., "Roll Forming of Gear at Ford Motor Company," AGMA, pp. 109-119, 1968
Terauchi, Y., Tabara, M. and Wakaoka, N., "A Study on Rolling Finish of Gear : 1st Report, Distribution of Plastic Deformation on Profile," Trans. JSME, Vol. 43, No. 375, pp. 4327-4336, 1977
Uematsu, S., "How to Occur Involute Profile Error in Finish Roll Forming of Spur Gears(1st Report)," Trans. JSPE, Vol. 54, No. 1, pp. 139-144, 1988
Uematsu, S. and Kato, M., "Involute Profile Error in Finish Roll Forming of Spur Gears(2nd Report) - formation of Pressure Angle Error," Trans. JSPE, Vol. 55, No. 10, pp. 1839-1844, 1989
Uematsu, S. and Kato, M., "A New Method of forced Displacement for finish roll Forming of Spur Gears (1st Report)-working Process and mechanism," Trans. JSPE, Vol. 56, No. 3, pp. 563-568, 1990
Uematsu, S. and Kato, M., "A New Method of forced Displacement for finish roll Forming of Spur Gears (2nd Report) - finishing Accuracy," Trans. JSPE, Vol. 56, No. 11, pp. 2105-2110, 1990
Lyu, S. K., "A Study on the Effect of Shot Peened Treatments on the Strength of Carburized Gears," J. of the Korean Society of Precision Engineering, Vol. 14, No. 9, pp. 61-67, 1997
Lee, S. H., "A Study on the Precision Analysis of Gear Measurement Using CNC Gear Tester & 3D Coordinate Measuring Machine," Gyeongsang National University, pp. 1-73, 1999
Lyu, S. K., "International Symposium on Technology of Machine Elements Design 2002." Research Center for Aircraft Parts Technology Gyeongsang National University, pp. 44-50, 2002
Lyu, S. K., "A Study on Correction of the Gear Tooth Profile Error by Finish Roll Forming," J. of the Korean Society of Precision Engineering, Vol. 22, No. 4, pp. 159-166, 2005
※ AI-Helper는 부적절한 답변을 할 수 있습니다.