최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Structural engineering and mechanics : An international journal, v.30 no.4, 2008년, pp.403 - 426
Hashemi, Seyed Hamid (Faculty of Engineering, Arak University) , Maghsoudi, Ali Akbar (Civil Engineering Department, Kerman University) , Rahgozar, Reza (Civil Engineering Department, Kerman University)
Externally bonding fiber reinforced polymer (FRP) sheets with an epoxy resin is an effective technique for strengthening and repairing reinforced concrete (RC) beams under flexural loads. Their resistance to electro-chemical corrosion, high strength-to-weight ratio, larger creep strain, fatigue resi...
ACI Committee 318 (1989), "Building code requirements for reinforced concrete", American Concrete Institute, Detroit
ACI (1992), "State-of-the-art report on high-strength concrete", ACI 363R, Detroit
An, W., Saadatmanesh, H. and Ehsani, M.R. (1991), "RC beams strengthened with FRP plates II: Analysis and parametric study", J. Struct. Eng., 117(11), 3434-3455
Balaguru, P. and Kurtz, S. (1997), "Use of inorganic polymer-fiber composites for repair and rehabilitation of infrastructures", Proceeding of the International Conference on Repair and Rehabilitation of Reinforced Concrete Structures, 155-168
Burg, R.G. and Ost, B.W. (1992), "Engineering properties of commercially available high-strength concretes", PCA Research & Development Bull, RD104T, Portland Cement Association, Skokie, Ill
Buyukozturk, O. and Hearing, B. (1998), "Failure behavior of precracked concrete beams retrofitted with FRP", J. Compos. Constr., 2(3), 138-144
Carrasquillo, R.L., Nilson, A.H. and Slate, F.O. (1981), "Properties of high strength concrete subject to shortterm loads", J. Am. Concr. Inst., 78(3), 171-178
Fanning, P.J. and Kelly, O. (2001), "Ultimate response of RC beams strengthened with CFRP plates", J. Compos. Constr., 5(2), 122-127
Federation Internationale de la Precontrainte/Comite Euro-International du Beton (FIP/CEB), (1990), "High strength concrete: State of the art report", Bull. d'Information No. 197, London
GangaRao, H.V.S. and Vijay, P.V. (1998), "Bending behavior of concrete beams wrapped with carbon fabric", J. Struct. Eng., 124(1), 3-10
Grace, N.F., Sayed, G.A., Soliman, A.K. and Saleh, K.R. (1999), "Strengthening reinforced concrete beams using fiber reinforced polymer (FRP) laminates", ACI Struct. J., 96(5), 865-874
Hognestad, E., Hanson, N.W. and McHenry, D. (1955), "Concrete stress distribution in ultimate strength design", ACI J., Proceedings, 52(12), 455-479
Maghsoudi, A.A. and Akbarzadeh, H. (2006), "Flexural ductility of HSC members", Struct. Eng. Mech., 24(2),195-213
Maghsoudi, A.A. (1996), "Design for ductility of structures", Shaheed Bahonar University Publications, Kerman, Iran
Malek, A.M., Saadatmanesh, H. and Ehsani, M.R. (1998), "Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end", ACI Struct. J., 95(2), 142-152
Mansur, M.A., Wee, T.H. and Chin, M.S. (1994), "Some engineering properties of locally produced high-strength concrete", Proc., 19th Conf. on our World in Concrete and Structures, CI-Premier Pte. Ltd., Singapore, 97- 106
Mukhopadhyaya, P., Swamy, N. and Lynsdale, C. (1998), "Optimizing structural response of beams strengthened with GFRP plates", J. Compos. Constr., 2(2), 87-95
Naaman, A. and Joeng, S. (1995), "Structural ductility of concrete prestressed beams with FRP tendons", Proceeding of the Second International RILEM Symposium - Non Metallic (FRP) Reinforcment for Concrete Structures, Ghent, Belgium, 379-386
Oztekin, E., Pul, S. and Husem, M. (2003), "Determination of rectangular stress block parameters for high performance concrete", J. Eng. Struct., 25, 371-376
Park, R. and Paulay, T. (1975), "Reinforced concrete structures", Wiley, New York. Paster, J.A., Nilson, A.H. and Slate, F.O., "Behavior of high-strength concrete beams", Report No. 84-3, Department of Structural Engineering, Cornell University, Ithaca, NY, Feb, 1984, 311
Rabinovitch, O. and Frostig, Y. (2000), "Closed-form high-order analysis of RC beams strengthened with FRP strips", J. Compos. Constr., 4(2), 65-74
Rahimi, H. and Hutchinson, A. (2001), "Concrete beams strengthened with externally bonded FRP plates", J. Compos. Constr., 5(1), 44-56
Rashid, M.A., Mansur, M.A. and Paramasivam, P. (2002), "Correlations between mechanical properties of highstrength concrete", J. Mater. Civil Eng., 14(3), 230-238
Ross, C.A., Jerome, D.M., Tedesco, J.W. and Hughes, M.L. (1999), "Strengthening of reinforced concrete beams with externally bonded composite laminates", ACI Struct. J., 96(2), 212-220
Saadatmanesh, H. and Ehsani, M.R. (1991), "RC beams strengthened with GFRP plates, I: Experimental study", J. Struct. Eng., 117(11), 3417-3433
Sharif, A., Al-Sulaimani, G.J., Basunbul, I.A., Baluch, M.H. and Ghaleb, B.N. (1994), "Strengthening of initially loaded reinforced concrete beams using FRP plates", ACI Struct. J., 91(2), 160-168
Sonobe, Y. et al. (1997), "Design guidelines of FRP reinforced concrete building structures", J. Compos. Constr., 1(3), 90-115
Spadea, G., Bencardino, F. and Swamy, R.N. (1998), "Structural behavior of composite RC beams with externally bonded CFRP", J. Compos. Constr., 2(3), 132-137
Toutanji, H., Zhao, L. and Zhang, Y. (2006), "Flexural behavior of reinforced concrete beams externally strengthened with CFRP sheets bonded with an inorganic and inorganic matrix", J. Eng. Struct., 28, 557-566
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.