최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.32 no.9 = no.276, 2008년, pp.770 - 781
송태광 (고려대학교 대학원 기계공학과) , 배홍열 (고려대학교 대학원 기계공학과) , 김윤재 (고려대학교 기계공학과) , 이경수 (한전전력연구원) , 박치용 (한전전력연구원)
In nuclear power plants, ferritic low alloy steel components were connected with austenitic stainless steel piping system through alloy 82/182 butt weld. There have been incidents recently where cracking has been observed in the dissimilar metal weld. Alloy 82/182 is susceptible to primary water str...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
일차수응력부식균열의 발생원인은? | (1~3) 균열은 Inconel 계열 용접 금속에서 발생하였으며 일차수응력부식균열(PWSCC)이 균열의 주요 발생 원인이었다. 일차수응력부식균열은 재료의 민감도, 용접부 인장 잔류 응력 및 사용 중 하중(In-service load), 부식 환경과 같은 3가지 인자의 상호작용에 의해 발생한다.(2,4,5) 따라서, 응력 부식 균열 발생 및 균열 진전을 억제하기 위해서는 용접부 잔류응력에 대한 정확한 예측이 선행되어야 한다. | |
응력 부식 균열 발생 및 균열 진전을 억제하기 위해 필요한것은? | 일차수응력부식균열은 재료의 민감도, 용접부 인장 잔류 응력 및 사용 중 하중(In-service load), 부식 환경과 같은 3가지 인자의 상호작용에 의해 발생한다.(2,4,5) 따라서, 응력 부식 균열 발생 및 균열 진전을 억제하기 위해서는 용접부 잔류응력에 대한 정확한 예측이 선행되어야 한다. | |
용접 기인 잔류응력을 예측하기 위해 상온에서 용융점 이상의 온도 범위에 대한 열 및 기계 재료 물성이 필요한 이유는? | 용접부는 상온에서 용융점 이상의 넓은 온도 범위를 겪게 되며 특히 다층 용접 시 반복적인 융용/응고/재 용융(re-melting) 과정을 겪게 된다. 용접기인 잔류응력은 용융/재 용융과정을 반복하면서 형성된 복잡한 온도 구배 및 재료 물성 불일치, 용접구조물의 구속 조건에 의해 발생한다.(3) 따라서 용접 기인 잔류응력을 예측하기 위해서는 상온에서 용융점 이상의 온도 범위에 대한 열 및 기계 재료 물성이 필요하다. |
EPRI, 2004, “Materials Reliability Program : Welding Residual and Operating Stresses in PWR Alloy 182 Butt Welds (MRP-106), EPRI Report
Brust, F. W. and Scott, P. M., 2007, “Weld Residual Stresses and Primary Water Stress Corrosion Cracking in Bimetal Nuclear Pipe Welds,” Trans. of ASME PVP conference, PVP2007-26297
Brust, F. W. and Scott, P., 2007, “Primary Water Stress Corrosion Cracking (PWSCC) in Bimetal Nuclear,” Trans. of SMiRT 19 conference
Fox, M., 1979, “An Overview of Intergranular Corrosion Cracking in BWRs,” Journal of materials in energy system, 1:3
ASME, 2004, “Materials,” ASME Boiler and Pressure Vessel Code, Sec. II, Part D-properties
Special Metals Corporation, 2007, “Inconel 600 Information,” www.specialmetals.com
Brickstad, B. and Josefson, B. L., 1998, “A Parametric Study of Residual Stresses in Multi-pass Butt-welded Stainless Steel Pipes,” International Journal of Pressure Vessels and piping, Vol. 75, pp. 11-25
ASME, 2004, “Welding and Brazing Qualification,” ASME Boiler and Pressure Vessel Code, Sec. IX
British Energy Generation Ltd., 2001, “Assessment of the Integrity of Structures Containing Defects,” R6 Rivision 4
ABAQUS, 2003, “ABAQUS Standard/User's Manual, Version 6.4,” Hibbit Karlsson & Sorensen, Inc
Zaeem, M. A., Nami, M. R. and Kadivar, M. H., 2006, “Global Buckling Investigation in Welding of a Thin Wall Aluminum T Joint,” Trans. of ASME PVP conference, PVP2006-ICPVT-11-93106
Mochizuki, M., Katsuyama, J. and Toyoda, M., 2006, “Effect of Geometric and Welding Conditions on Through-Thickness Residual Stress,” Trans. of ASME PVP conference, PVP2006-ICPVT-11-93489
Limpus, C.R., Dijamco, D. Bax, G., Cofie, R. and Nathaniel G., 2007, “Effect of Size of Butt Weld Repaires on Weld Overlay Residual Stresses,” Trans. of ASME PVP conference, PVP2007-26636
U.S. Nuclear Regulatory Commission, 1992, “Technical Report on Material Selection and Processing Guidelines for BWR Coolant Pressure Boundary Piping-Final Report,” NUREG-0313, Revision 2
Dong, P.and Brust, F. W., 2000, “Welding Residual Stresses and Effects on Fracture in Pressure Vessel and Piping Components : A Millennium Review and Beyond,” Journal of Pressure Vessel Technology, Vol. 122, pp. 329-338
Warren, A. P., Bate, S. K. and Hurrell, P., 2007, “The Effect of Modeling Simplification on the Prediction of Residual Stresses in a Multi-pass Plate Groove Weld,” Trans. of ASME PVP conference, PVP2007-26339
Rudland, D., Chen, Y., Zhang, T. and Wilkowski, G., 2007, “Comparison of Welding Residual Stress Solutions for Control Rod Drive Mechanism Nozzles,” Trans. of ASME PVP conference, PVP2007-26045
Yaghi, A., Gyde, T. H., Becker, A. A., Sun, W. and Williams, J. A., 2006, “Residual Stress Simulation in Thin and Thick-walled Stainless Steel Pipe Welds Including Pipe Diameter Effects,” International Journal of Pressure Vessels and Piping, Vol. 83, pp. 864-874
Hurrell, P. R., Everett, D., Gregg, A. and Bate, S., 2006, “Review of Residual Stress Mitigation Methods for Application in Nuclear Power Plant,” Trans. of ASME PVP conference, PVP2006-ICPVT-11-93381
Leggatt, N. A., Dennis, R. and Hurrel, P. R., 2007, “Modeling the Fabrication of a Pressure Vessel Toroidal Seal,” Trans. of ASME PVP conference, PVP2007-26145
Dennis, R. J., Leggatt, N. A. and Gregg, A., 2006, “Optimisation of Weld Modeling Techniques ? Bead on Plate Analysis, Trans. of ASME PVP conference, PVP2006-ICPVT-11-93907
Bate, S. K., Warren, A. P., Watson, C. T., Hurrel, P. and Francis, J. A., 2007, “UK Research Programme on Residual Stresses ? Progress to Date,” Trans. of ASME PVP conference, PVP2007-26337
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.