최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國海洋工學會誌 = Journal of ocean engineering and technology, v.22 no.4 = no.83, 2008년, pp.59 - 64
이상필 (동의대학교 기계공학과) , 이문희 (동의대학교 기계공학과) , 이진경 (동의대학교 기계공학과)
The mechanical properties of liquid phase sintered (LPS) SiC materials, with the addition of oxide powder, were investigated, in conjunction with a detailed analysis of their microstructures. LPS-SiC materials were fabricated at a temperature of 1820
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Jones, R.H., Hasegawa, A., Katoh, Y., Kohyama, A., Riccardi, B., Snead, L.L. and Weber, W.J. (2002). 'Promise and Challenges of $SiC_f/SiC$ Composites for Fusion Energy Applications', J. Nucl. Mater. Vol 307-311, pp 1057-1072
Katoh, Y., Kohyama, A., Nozawa, T. and Sato, M. (2004). 'SiC/SiC Composites through Transient Eutectic-phase Route for Fusion Applications', J. Nucl. Mater Vol 329-333, pp 587-591
Katoh, Y., Snead, L.L., Henager, C.H. Jr., Hasegawa, A., Kohyama, A., Riccardi, B., and Hegeman, H. (2007). 'Current Status and Critical Issues for Development of SiC Composites for Fusion Applications', J. Nucl. Mater. Vol 367-370, pp 659-671
Lee, S.P., Jin, J.O., Park, J.S., Kohyama, A., Katoh, Y., Yoon, H.K., Bae, D.S. and Kim, I.S. (2004). 'High Temperature Characterization of Reaction Sintered SiC Based Materials', J. Nucl. Mater. Vol 329-333, pp 534-538
Lee, S.P., Shin, Y.S., Bae, D.S., Min, B.H., Park, J.S. and Kohyama, A. (2006). 'Fabrication of Liquid Phase Sintered SiC Materials and their Characterization', Fus. Eng. and Des. Vol 81, Iss 8-14, pp 963-967
Park, J.S., Katoh, Y., Kohyama, A., Lee, J.K., Sha, J.J. and Yoon, H.K. (2004). 'Tailoring the Microtructure of Hot-pressed SiC by Heat Treatment', J. Nucl. Mater. Vol 329-333, pp 558-561
Riccardi, B., Giancarli, L., Hasegawa, A., Katoh, Y., Kohyama, A., Jones, R.H. and Snead, L.L. (2004). 'Issues and Advances in $SiC_f/SiC$ Composites Development for Fusion Reactors', J. Nucl. Mater. Vol 329-333, pp 56-65
Shimoda, K., Park, J.S., Hinoki, T., Kohyama, A. (2008). 'Influence of Pyrolytic Carbon Interface Thickness on Microstructure and Mechanical Properties of SiC/SiC Composites by NITE Process', Compo. Sci. Tech. Vol 68, pp 98-105
Suo, J., Chen, Z., Xiao, J. and Zheng, W. (2005). 'Influence of an Initial Hot-press Processing Step on the Mechanical Properties of 3D-C/SiC Composites Fabricated via PIP', Cera. Int. Vol 31, Issue 3, pp 447-452
Taguchi, T., lgawa, N., Jitsukawa, S. and Shimura, K. (2006). 'Effect of Implanted Helium on Thermal Diffusivities of SiC/SiC Composites', Nucl. Inst. Meth. Phy. Res. (B). Vol 242, Issue 1-2, pp 469-472
Yang, W., Araki, H., Kohyama, A., Yang, Q. and Noda, T. (2007). 'Effects of Heat Treatment on the Microstructure and Flexural Properties of CVI - Tyranno-SA/SiC Composite', Cera. Int. Vol 33, Issue 2, pp 141-146
Zhu, Y., Huang, Z., Dong, S., Yuan, M. and Jiang, D. (2008). 'Manufacturing 2D Carbon-fiber-reinforced SiC Matrix Composites by Slurry Infiltration and PIP Process', Cera. Int. Vol 34, Issue 5, pp 1201-1205
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.