최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기복합재료 : 한국복합재료학회지 = Journal of the Korean Society for Composite Materials, v.21 no.4, 2008년, pp.7 - 14
김원석 (한국과학기술원 기계항공시스템공학과 기계공학 대학원) , 이정주 (한국과학기술원 기계항공시스템공학과 기계공학)
Prediction of the load-bearing capacity of an adhesive-bonded Joint is of practical importance for engineers. This paper introduces interface fracture mechanics approach to predict the load-bearing capacity of composite metal bonded joints. The adhesion strength of composite/steel bonding is evaluat...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kinloch A.J., Adhesion and Adhesives: science and technology, 1987, Chapman and Hall
Pocius A.V., Adhesion and Adhesives Technology: An introduction, 1997, Hanser Publishers
Tong L., 'An assessment of failure criteria to predict the strength of adhesively bonded composite doubler Lap Joints,' Journal of Reinforced Plastics and Composites, Vol. 16, No. 18, 1997, pp. 698-713
김광수, 이영무, 김천곤, '일방향 복합재료 Single Lap 접 합 조인트의 파손 모드 및 파손 강도: II 파손 예측,' 한국복합재료학회지, 제18권 제1호, 2005, pp. 1-9
Anderson G.P. and DeVries K.L., 'Predicting bond strength,' Journal of Adhesion, Vol. 23, 1987, pp. 289-302
Anderson G.P. and DeVries K.L., 'Predicting strength of adhesive joints from test results,' International Journal of Fracture, Vol. 39, 1989, pp. 191-200
Reedy E.D. and Guess T.R., 'Comparison of butt tensile strength data with interface corner stress intensity factor prediction,' International Journal of Solids and Structures, Vol. 30, No. 21, 1993, pp. 2929-2936
Qian Z.Q. and Akisanya A.R., 'An experimental investigation of failure initiation in bonded joints,' Acta materia, Vol. 46, No. 14, 1998, pp. 4895-4904
Akisanya A.R and Fleck N.A., 'Interfacial cracking from the free edge of a long bi-material strip,' International Journal of Solids and Structures, Vol. 34, 1997, pp. 1645-1665
Irwin G.R., 'Analysis of stresses and strains near the end of a crack traversing a plate,' Journal of Applied Mechanics, Vol. 24, 1957, pp. 361-364
Hellen T.K., 'On the method of virtual crack extension,' International Journal for Numerical methods in Engineering, Vol. 9, 1975, pp. 187-207
Qian W. and Sun C.T., 'A frictional interfacial crack under combined shear and compression,' Composites Science and Technology, Vol. 58, 1998, pp. 1753-1761
Russell A.J. and Street K.N., 'Moisture and temperature effects on the mixed-mode delamination fracture of unidirectional graphite/epoxy,' Delamination and Debonding of Materials, ASTM STP 876, 1985, pp. 349-370
Carlsson L.A., Gillespie J.W. and Pipes R.B., 'On the analysis and design of the end notched flexure (ENF) specimen for mode II testing,' Journal of Composite Materials, Vol. 20, 1986, pp. 594-604
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.