최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.33 no.3 = no.282, 2009년, pp.210 - 217
정낙신 (KAIST 대학원 기계공학) , 양민양 (KAIST 기계항공시스템학부)
This paper presents the analytical prediction of stability lobes in milling. The stability lobes are obtained by measuring the frequency response function (FRF) of a machining center at the cutting point of the end mill cutter, identifying cutting constants, and approximating cutting force coefficie...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
절삭 가공을 이용한 산업 분야에 있어 가공 비용을 높이고 가공 생산성을 떨어뜨리는 주요인은 무엇인가? | 채터가 발생하면 구조물의 진동이 심해져 공구는 가공 경로를 벗어나게 되고 이로 인해 값비싼 가공품의 품질은 손상되어 경제적 손실을 유발시킨다. 또한 채터로 인해 생기는 공구의 파손은 절삭 가공을 이용한 산업 분야에 있어 가공 비용을 높이고 가공 생산성을 떨어뜨리는 주요인이 되고 있다. 더욱이, 잦은 채터의 발생은 공작기계 스핀들 부를 손상시켜 공작기계 자체를 파손시키고 수명 저하를 촉진시킨다. | |
가공 시스템에서 동적으로 불안정한 채터의 원인은 무엇과 관련되어 있는가? | 그러나 실제 제조된 공작기계는 설계 단계에서 예측하지 못한 요인들로 인해 현장에서 절삭 가공 시 특정 가공 조건에서는 동적으로 불안정한 채터가 발생하게 된다. 가공 시스템의 불안정성인 채터는 그 원인이 공작기계의 구조적 측면에서 정적 강성에만 의존하는 것이 아니라 공구 구조물, 공작물, 그리고 가공 프로세스가 통합된 절삭 메커니즘과 관련되어 있다. 채터가 발생하면 구조물의 진동이 심해져 공구는 가공 경로를 벗어나게 되고 이로 인해 값비싼 가공품의 품질은 손상되어 경제적 손실을 유발시킨다. | |
채터가 어떻게 경제적 손실을 유발시키는가? | 가공 시스템의 불안정성인 채터는 그 원인이 공작기계의 구조적 측면에서 정적 강성에만 의존하는 것이 아니라 공구 구조물, 공작물, 그리고 가공 프로세스가 통합된 절삭 메커니즘과 관련되어 있다. 채터가 발생하면 구조물의 진동이 심해져 공구는 가공 경로를 벗어나게 되고 이로 인해 값비싼 가공품의 품질은 손상되어 경제적 손실을 유발시킨다. 또한 채터로 인해 생기는 공구의 파손은 절삭 가공을 이용한 산업 분야에 있어 가공 비용을 높이고 가공 생산성을 떨어뜨리는 주요인이 되고 있다. |
Tobias, S. A., 1965, Machine-Tool Vibration, John Wiley & Sons, Inc., New York
Koenigsberger, F. and Tlusty, J., 1970, Machine Tool Structures Volume 1, Pergamon Press
Merritt, H.E., 1965, “Theory of Self-Exited Machine-Tool Chatter,” Journal of Engineering for Industry, Vol. 87. pp. 447-454
Tlusty, J., 1978, “Analysis of the State of Research in Cutting Dynamics,” Annals of the CIRP, Vol. 27/2, pp. 583-589
Tlusty, J. and Ismail, F., 1981, “Basic Non-Linearity in Machining Chatter,” Annals of the CIRP, Vol. 30/1, pp. 299-304
Tlusty, J. and Ismail, F., 1983, “Special Aspects of Chatter in Milling,” Transactions of the ASME, Vol. 105, pp.24-32
Tlusty, J., Zaton, W. and Ismail, F., 1983, “Stability Lobes in Milling,” Annals of the CIRP, Vol. 32/1, pp. 309-313
Tlusty, J., 1986, “Dynamics of High-Speed Milling,” Journal of Engineering for Industry, Vol. 108, pp. 59-67
Ioannis Minis, Rafael Yanushevsky, Abel Tembo, 1990, “Analysis of Linear and Nonlinear Chatter in Milling,” Annals of the CIRP, Vol. 39/1, pp. 459-462
Tlusty, J., 2000, Manufacturing Processes and Equipment, Prentice Hall
Smith, S. and Tlusty, J., 1990, “Update on High-Speed Milling Dynamics,” Transactions of the ASME, Vol. 112, pp. 142-149
Smith, S. and Tlusty, J., 1991, “An Overview of Modeling and Simulation of the Milling Process,” Journal of Engineering for Industry, Vol. 113, pp. 169-175
Smith, S. and Tlusty, J., 1993, “Efficient Simulation Programs for Chatter in Milling,” Annals of the CIRP, Vol. 42/1, pp. 463-466
Smith, S. and Tlusty, J., 1997, “Current Trends in High-Speed Machining,” Transactions of the ASME, Vol. 119, pp. 664-666
Minis, I. and Yanushevsky, R., 1993, “A New Theoretical Approach for the Prediction of Machine Tool Chatter in Milling,” Journal of Engineering for Industry, Vol. 115, pp. 1-8
Altintas, Y. and Budak, E., 1995, “Analytical Prediction of Stability Lobes in Milling,” Annals of the CIRP, Vol. 44, No. 1, pp. 357-362
Budak, E. and Altintas, Y., 1998, “Analytical Prediction of Chatter Stability in Milling - Part I: General Formulation,” Transactions of ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 120, pp. 22-30
Budak, E. and Altintas, Y., 1998, “Analytical Prediction of Chatter Stability in Milling - Part II: Application of the General Formulation to Common Milling Systems,” Transactions of ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 120, pp. 31-36
Altintas, Y., 2000, Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations and CNC Design, Cambridge University Press, New York
Altintas, Y., 2001, “Analytical Prediction of Three Dimensional Chatter Stability in Milling,” International Journal of JSME, Section C, Vol. 44, No. 3, pp. 717-723
Tlusty, J., Smith, S. and Winfough, W.R., 1996, “Techniques for the Use of Long Slender End Mills in High-speed Milling,” Annals of the CIRP, Vol. 45/1, pp. 393-396
Davies, M.A., Dutterer, B., Pratt, J.R., Schaut, A.J., 1998, “On the Dynamics of High-Speed Milling with Long, Slender Endmills,” Annals of the CIRP, Vol. 47/1, pp. 55-60
Davies, M.A., Pratt, J.R., Dutterer, B. and Burns, T.J., 2000, “The Stability of Low Radial Immersion Milling,” Annals of the CIRP, Vol. 49/1, pp. 37-40
Davies, M.A., Pratt, J.R., Dutterer, B. and Burns, T.J., 2002, “Stability Prediction for Low Radial Immersion Milling,” Journal of Manufacturing Science and Engineering, Vol. 124, pp. 217-225
Bayly, P.V., Mann, B.P., Schmitz, T.L., Peters, D.A., Stepan, G. and Insperger, T., 2002, “Effects of Radial Immersion and Cutting Direction on Chatter Instability in End-Milling,” Proceedings of IMECE, pp. 1-14
Bayly, P.V., Halley, J.E., Mann, B.P. and Davies, M.A., 2003, “Stability of Interrupted Cutting by Temporal Finite Element Analysis,” Transactions of the ASME, Vol. 125, pp. 220-225
Smith, S. and Tlusty, J., 1992, “Stabilizing Chatter by Automatic Spindle Speed Regulation,” Annals of the CIRP, Vol. 41/1, pp. 433-436
Tlusty, J., 1993, “High-Speed Machining,” Annals of the CIRP, Vol. 42/2, pp. 733-738
Kwon Won-Tae, 1994, “Cutting Force Analysis under Chatter Condition with a Worn Tool,” Transactions of the Korean Society of Mechanical Engineers, Vol. 18, No. 2, pp. 292-301
Kim Gi Dae, Kwon Won Tae, Chu Chong Nam and Lee Jang Moo, 1994, “In-Process Chatter Detection Using Multiple Sensors in Turning,” Transactions of the Korean Society of Mechanical Engineers, Vol. 18, No. 7, pp. 1618-1631
Jae-Hyun Park, Seong-Wook Hong, Hyun-soo Kim and Joong-Youn Park, 2000, “Milling Chatter Stability Analysis in Consideration of Gyroscopic Effect,” Journal of the Korean Society of Precision Engineering, Vol. 17, No. 2, pp. 58-63
Moon-Ki Kim, 2001, “Diagnosis of Chatter Vibration using Frequency Domain in a Milling Process,” Transactions of the Korean Society of Machine Tool Engineers, Vol. 10, No. 3, pp.12-18
Kim, Y.K., Yoon, M.C., Ha, M.K. and Sim, S.B., 2002, “A Study on the Behavior of Chatter in Milling Operation,” Journal of the Korean Society of Manufacturing Technology, Vol. 1, No. 1, pp. 123-132
Moon-Chul Yoon, Hyun-Deog Cho and Eung-Soog Lee, 2003, “Natural Mode Analysis for Chatter Lobe Estimation,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 2, No. 2, pp. 60-66
Sang-Lok Oh, Do-Hun Chin and Moon-Chul Yun, 2004, “Detection and Analysis of Chatter in Endmilling Operation,” Transactions of the Korean Society of Machine Tool Engineers, Vol. 13, No. 6, pp. 10-16
Faassen, R.P.H., van de Wouw, N., Oosterling, J.A.J. and Nijmeijer, H., 2003, “Prediction of Regenerative Chatter by Modelling and Analysis of High-Speed Milling,” International Journal of Machine Tools & Manufacture, Vol. 43, pp. 1437-1446
Ganguli, A., Deraemaeker, A. and Preumont, A., 2007, “Regenerative Chatter Reduction by Active Damping Control,” Journal of Sound and Vibration, Vol. 300, pp. 847-862
Duncan, G.S., Schmitz, T.L. and Kurdi, M., 2005, “Stability Lobe Uncertainty,” Proceedings of American Society for Precision Engineering Annual Meeting
Duncan, G.S., Kurdi, M., Schmitz, T.L. and Snyder, J., 2006, “Uncertainty Propagation for Selected Analytical Milling Stability Limit Analyses,” Transactions of the NAMRI/SME, Vol. 34, pp. 17-24
Il Hae Kim and Dong Young Jang, 2007, “A Cylindrical Spindle Displacement Sensor and its Application on High Speed Milling Machine,” Transactions of the Korean Society of Machine Tool Engineers, Vol. 16, No. 5, pp. 108-114
Hun-Keun Jang, Il Hae Kim and Dong Young Jang, 2007, “Chatter Monitoring of Milling Process using Spindle Displacement Signal,” Transactions of the Korean Society of Machine Tool Engineers, Vol. 16, No. 6, pp. 140-145
Budak, E., Altintas, Y. and Armarego, E. J. A., 1996, “Prediction of Milling Force Coefficients from Orthogonal Cutting Data,” Journal of Manufacturing Science and Engineering, Vol. 118, pp. 216-224
Ewins, D.J., 2000, Modal Testing, Theory, Practice, and Application, Research Studies Press Ltd.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.