최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓溶接·接合學會誌 = Journal of the Korean Welding and Joining Society, v.27 no.6, 2009년, pp.9 - 16
박영환 (부경대학교 기계공학부) , 이세헌 (한양대학교 기계공학부) , 김철희 (한국생산기술연구원 용접.접합연구부)
In this paper, the coaxial monitoring system to capture image of weld pool was developed in laser-arc hybrid welding. In order to obtain the reliable image, green laser was used as a illumination system and measuring components such as band pass filter, ND (Neutral Density) filter and shutter speed ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
레이저-아크 하이브리드 용접이란 무엇인가? | 레이저-아크 하이브리드 용접은 열원으로 레이저와 아크 용접을 접목한 복합 용접법으로 각 용접법이 갖는 장점은 극대화하고 단점은 서로가 보완하는 용접법이다. 깊은 용입이라는 장점을 갖고, 용접부 변형이 상대적으로 적으며, 모재의 갭(gap)에 대한 민감도를 극복할 수 있는 용접공정으로 많은 조립공정에서 사용되고 있다. | |
레이저 가공에서 발생되는 현상에는 어떠한 것들이 있는가? | 레이저 가공에 있어서 발생되는 현상은 음향(acoustic), 소리(sound), 그리고 빛의 방출, 화상(image), 플라즈마에 의한 가공부 주변의 전하의 변동 등이 있다1). 이중에서 가장 많이 사용되는 방법은 음향이나 소리 그리고 빛이나 화상을 계측하는 방법이다. | |
레이저-아크 하이브리드 용접의 장점은? | 레이저-아크 하이브리드 용접은 열원으로 레이저와 아크 용접을 접목한 복합 용접법으로 각 용접법이 갖는 장점은 극대화하고 단점은 서로가 보완하는 용접법이다. 깊은 용입이라는 장점을 갖고, 용접부 변형이 상대적으로 적으며, 모재의 갭(gap)에 대한 민감도를 극복할 수 있는 용접공정으로 많은 조립공정에서 사용되고 있다. 이러한 레이저-아크 하이브리드 용접공정을 자동화하는데 있어서 용접 상황을 모니터링하고 실시간으로 감지하는 것은 생산성과 품질의 확보에 있어서 매우 중요하다. |
A. Sun and E. Kannatey-Asibu, Jr. : Sensor System for Real-time Monitoring of Laser Weld Quality, Journal of Laser Applications, 11-4 (2001), 153-168
M.C. Jon : Noncontact Acoustic Emission Monitoring of Laser Beam Welding, Welding Journal, 63-9 (1984), 43-48
H.B. Chen, L. Li, D.J. Brookfield, K. Williams and W.M. Steen : Laser Process Monitoring with Dual Wavelength Optical Sensors, Proceeding of ICALEO '91, (1991), 113-122
W. Gatzweiler, D. Maischner and E. Beyer : On-line Diagnostics for Process-control in Welding with $CO_2$ Lasers, High Power $CO_2$ Laser System & Applications, SPIE 1020 (1998), 142-148
D. Maischner, A. Drenker, B. Seidel, P. Abels and E. Beyer : Process Control During Laser Bean Welding, Proceeding of ICALEO'91, (1991), 150-155
K. Mori, H. Sakamoto and I. Miyamoto : Detection of Weld Defects in Tailored Blanks, Journal of Japan Welding Society, 14-4 (1996), 689-693
I. Miyamoto and K. Mori : Development of Inprocess Monitoring System for Laser Welding, Proceeding of ICALEO'95, (1995), 759-767
D. Farson, A. Ali and Y. Sang : Relationship of Optical and Acoustic Emission to Laser Weld Penetration, Welding Journal, 77-4 (1998), 142s-148s
R.W. Richardson, D.A. Gutow, R.A. Anderson and D. Farson : Coaxial Arc Weld Pool Viewing for Process Monitoring and Control, Welding Journal, 63-3 (1984), 43-50
K. Ohshima : Observation and Control of Weld Phenomena in Arc Welding, Journal of Japan Welding Society, 58-4 (1989), 44-49
R. Kovacevic, Y. M. Zhang and L. Li : Monitoring of weld joint penetration based on weld pool geometrical appearance, Welding Journal, 75-10 (1996), 317s-329s
B. Zheng, H.J. Wang and Q.L. Wang : Front Image Sensing of the Keyhole puddle in the variable polarity PAW of Aluminum Alloy, Journal of Material Processing Technology, 83 (1998), 286-298
S. Postma, R.G.K.M. Aarts, J. Meijer and J.B. Jonker : Penetration Control in Laser Welding of Sheet Metal, Journal of Laser Applications, 14-4 (2002), 210-214
J.H. Kim : Analysis of Welding Phenomenon Using Coaxial Monitoring System in Disk Laser Welding, Master Thesis, Hanyang University, 2007 (in Korean)
J. Beersiek, T. Devermann and K. Behler : Practical Applications of In-process Monitoring for Laser Processes - Not only for Single Welds and Common Materials, Proceeding of ICALEO'04, (2004), 1001
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.