최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.26 no.4 = no.217, 2009년, pp.91 - 99
이승표 (한양대학교 기계설계학과 대학원) , 강형주 (주식회사 아이엠에스) , 하성규 (한양대학교 기계정보경영공학부)
Because of both precise measurement and efficient quality control, coordinate measuring machines(CMMs) have been widely used in the industry. The purpose of this paper is to present a method to estimate the CMM measurement uncertainty using design of experiments. A factorial design is applied to car...
ISO, "Guide to the Expression of Uncertainty in Measurement (GUM)," International Organization for Standardization(ISO), 1995
Woo, I. H., "3 dimensional coordinate measuring machine technical trend and development status," Journal of the Korean Society of Mechanical Engineering, Vol. 38, No. 5, pp. 45-48, 1998
Wilhelm, R. G., Hocken, R. and Schwenke, H., "Task specific uncertainty in coordinate measurement," Annals of CIRP, Vol. 52, No. 2, pp. 553-563, 2001
Phillips S. D., Borchardt, B., Estler, W. T. and Buttress, J., "The estimation of measurement uncertainty of small circular features measured by coordinate measuring machines," Precision Engineering, Vol. 22, No. 1, pp. 87-97, 1998
Piratelli-Filho, A. and Giacomo, B. D., "CMM uncertainty analysis with factorial design," Precision Engineering, Vol. 27, No. 3, pp. 283-288, 2003
Feng, C. X., Saal, A. L., Salsbury, J. G., Ness, A. R. and Lin, G. C. S., "Design and analysis of experiments in CMM measurement uncertainty study," Precision Engineering, Vol. 31, No. 2, pp. 94-101, 2007
Lee, G. J., Oh, S. L. and Kim, J. K., "A study on Measurement Uncertainty of 3-dimensional Coordinate Measuring machine used for Inspection of Precision Machined parts," Transactions of the Korean Society of Machine Tool Engineers, Vol. 14, No. 2, pp. 55-61, 2005
ISO 10360, "Coordinate metrology, part 1-2," International Organization for Standardization (ISO), pp. 1-4, 1994
Basil, M. and Jamieson, A., "Uncertainty of Complex Systems by Monte Carlo Simulation," Measurement and Control, Vol. 32, No. 1, pp. 16-20, 1999
Kwak, J. S. and Ha, M. K., "Optimization of Grinding Conditions and Prediction of Surface Roughness Using Taguchi Experimental Design," Journal of the Korean Society of Precision Engineering, Vol. 21, No. 7, pp. 37-45, 2004
Lim, P., Park, S. Y. and Yang, G. E., "A Study on tool life in the high speed machining of small-size end mill by factorial design of experiments and regression model," Journal of the Korean Society of Precision Engineering, Vol. 23, No. 2, pp. 73-80, 2006
Park, S. H., "Modern design of experiments," Minyongsa, pp. 121-140, 2001
Montgomery, D. C., "Design and analysis of experiments," Willey, pp. 228-249, 1991
Lee, S. P. and Ha, S. K., "Performance Evaluation for Coordinate Measuring Machine using Design of Experiments," Transactions of the Korean Society ofMachine Tool Engineers, Vol. 17, No. 4, pp. 133-139, 2008
KS A 3000, "Guide to the expression of uncertainty in measurement," Korean Standards Association(KS), pp. 7-33, 2005
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.