최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국세라믹학회지 = Journal of the Korean Ceramic Society, v.46 no.2 = no.321, 2009년, pp.181 - 188
박금진 (삼성전기 LCR 재료개발 그룹) , 김창훈 (삼성전기 LCR 재료개발 그룹) , 김영태 (삼성전기 LCR 재료개발 그룹) , 허강헌 (삼성전기 LCR 개발팀)
The electrical property and microstructure in
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
MLCC의 경우 내부전극의 산화방지를 위해 어떤 분위기에서 소성이 되는가? | MLCC는 내부전극의 산화를 방지하기 위하여 환원분위기에서 소성이 된다. 그래서 낮은 산소 분압때문 형성된 산소 공공에 의하여 전자가 형성되게 된다. | |
희토류 성분의 첨가는 어떤 특성을 향상시키는가? | 1-3) Shell 형성에 dominant 역할을 하는 것은 희토류 성분이며, 희토류만 존재할 경우 core-shell 구조 형성이 잘되지 않고, 희토류가 Mg와 함께 있을 경우 core-shell 구조를 잘 형성됨이 보고된 바 있다.4) 그리고 희토류 성분의 첨가는 비유전율의 온도의존성(TCC)를 안정화시키고, 유선손실(DF)를 낮추며, lifetime을 증가시키는 것으로 알려져 있고, 희토류 종류 및 함량에 따라 유전체의 전기적 특성이 달라지는 것으로 알려져 있다.5,6) | |
희토류 이온 중 Dy를 첨가한 시편의 경우 치밀화 완료 후 입성장 현상을 나타내는 이유는? | Dy 이온은 Y, Ho에 비하여 치밀화가 완료될 때까지 A site로 치환이 많이 되다가, 치밀화 완료 후 B site로의 치환이 급격하게 증가하게 되었다. Dy를 첨가한 시편은 치밀화 완료 후 입성장 현상이 나타났는데, 이는 Dy 이온의 B site로 치환이 증가되기 때문으로 보인다. 반면 Y 과 Ho은 치밀화 완료 후에 BT 내로 더 이상 잘 들어가지 않았고, 입성장 현상이 나타나지 않았다. |
C. A.. Randall, S. F. Wang, D. Laubscher, J. P. Dougherty, and W. Huebner, “Structure Property Relationships in Coreshell $Batio_3$ -lif Ceramics,” J. Mater. Res., 8 871-79 (1993).
S. H. Yoon, J. H. Lee, D. Y. Kim, and N. M. Hwang, “Coreshell Structure of Acceptor-rich, Coarse Barium Titanate Grains,” J. Am. Ceram. Soc., 85 3111-13 (2002).
Y. Fujikawa, Y. Umeda, and F. Yamane, “Analysis on the Sintering Process of X7R MLCC Materials,” J. Jpn. Soc. Powder Powder Metallurgy, 51 839-44 (2004).
C. H. Kim, K. J. Park, Y. J. Yoon, M. H. Hong, J. O. Hong, and K. H. Hur, “Role of Yttrium and Magnesium in the Formation of Core-shell Structure of $BaTiO_3$ Grains in MLCC,” J. Eur. Ceram. Soc., 28 1213-19 (2008).
Y. Sakabe, Y. Hamaji, H. Sano, and N. Wada, “Effects of Rare-earth Oxides on the Reliability of X7R Dielectrics,” Jpn. J. Appl. Phys., 41 5668-79 (2002).
H. Saito, Chazono, H. Kishi, and N. Yamaoka, “X7R Multilayer Ceramic Capacitors with Nickel Electrodes,” Jpn. J. Appl. Phys., 30 2307-10 (2001).
Y. Tsur, T. D. Dunbar, and C. A. Randall, “Crystal and Defect Chemistry of Rare-earth Cations in $BaTiO_3$ ,” J. Electroceram., 7 25-34 (2001).
G. V. Lewis and C. R. A. Catlow, “Computer Modeling of Barium Titanate,” Radiat. Effects, 73 307-14 (1983).
G. V. Lewis, and C. R. A. Catlow “Deffect Studies of Doped and Undoped Barium Titanate Using Computer Simulation Techniques,” J. Phys. Chem. Sol., 47 89-97 (1986).
Y. Tsur, A. Hitomi I. Scrymgeour, and C. A. Randall, “Site Occupancy of Rare-earth Cations in $BaTiO_3$ ,” Jpn. J. Appl. Phys., 40 255-58 (2001).
H. Kishi, Y. Mizuno, and H. Chazono, “Base-metal Electrode-multilayer Ceramics Capacitors : Past, Present and Future Perspectives,” Jpn. J. Appl. Phys. 42 1-15 (2003).
H. Kishi, N. Kohzu, J. Sugino, H. Ohsato, Y. Iguchi, and T. Okuda, “The Effect of Rare-earth (La, Sm, Dy, Ho and Er) and Mg on the Microstructure in $BaTiO_3$ ,” J. Eur. Ceram. Soc., 19 1043-46 (1999).
R. D. Shannon, “Revised Effective Ionic Radii and Systematic Studies of Interatomic Distances in Halides and Chalcogenides,” Acta Crystallogr., A32 751-67 (1976).
S. H. Yoon, M. H. Hong, J. O. Hong, Y. T. Kim, and K. H. Hur, “Effect of Acceptor (Mg) Concentration on the Electrical Resistance at Room and High (200°C) Temperatures of Acceptor (Mg)-Doped $BaTiO_3$ Ceramics,” J. Appl. Phys., 102 054105 (2007).
K. Sasaki and J. Maier, “Low-temperature Defect Chemistry of Oxides. I. General Aspects and Numerical Calculations,” J. Appl. Phys., 86 5422-33 (1999).
S. H. Yoon and H. Kim, “Effect of Donor (Nb) Concentration on the Bulk Electrical Resistivity of Nb-doped Barium Titanate,” J. Appl. Phys., 92 1039-47 (2002).
D. Makovec, Z. Samardzija, and M. Drofenik, “Solid Solubility of Holmium, Yttrium, Dysprosium in BaTiO3,” J. Am. Ceram. Soc., 87 1324-29 (2004).
B. D. Cullity, Elements of X-ray Diffraction, pp.281-92, Ed. by M. Cohen, Addison-Wesley, London, 1978.
H. Y. Lu and M. H. Lin, “Charge Compensation Mechanism in Yttria-doped Barium Titanate,” Ceram. Int., 31 989-97 (2005).
K. Andrei, H. Tomoya, K. Hiroshi, and O. Hitoshi, “Effect of Ho/Mg Ratio on Formation Core-shell Structure in $BaTiO_3$ and on Dielectric Properties of BaTiO3 Ceramics,” Jpn, J. Appl. Phys., 41 6934-37 (2002).
M. Drofenik, “Oxygen Partial Pressure and Grain Growth in Donor-doped BaTiO3,” J. Am. Ceram. Soc., 70 311-14 (1987).
J. K. Lee and K. S. Hong, “Revisit to the Origin of Grain Growth Anomaly in Yttria-doped Barium Titanate,” J. Am. Ceram. Soc., 84 1745-49 (2001).
C.H. Kim, K.J. Park, Y.J.Yoon, D.S. Sinn, Y. T. Kim, and K.H. Hur, “Effects of Milling Condition on the Formation of Core-shell Structure in $BaTiO_3$ Grains,” J. Eur. Ceram. Soc., 28 [13] 2589-96 (2008).
Y. K. Vayunandana Reddy, D. Mergel, S. Reuter, V. Buck, and M. Sulkowski, “Structural and Optical Properties of $BaTiO_3$ Thin Films Prepared by Radio-frequency Magnetron Sputtering at Various Substrate Temperatures,” J. Phys. D: Appl. Phys., 39 1161-68 (2006).
J. K. Lee, K. S. Hong, and J. W. Jang, “Roles of Ba/Ti Ratios in the Dielectric Properties of $BaTiO_3$ Ceramics,” J. Am. Ceram. Soc., 84 2001-200 (2001).
Y. S. Yoo, J. J. Kim, and D. Y. Kim, “Effects of Heating Rate on the Microstructural Evolution During Sintering of $BaTiO_3$ Ceramics,” J. Am. Ceram. Soc., 70 C322-24 (1987).
H. Chazono and H. Kishi “dc-Electrical Degradation of the BT-Based Material for Multilayer Ceramic Capacitor with Ni internal Electrode : Impedance Analysis and Microstructure,” Jpn. J. Appl. Phys., 40 5624-29 (2001).
Y. Mizuno, T. Hagiwara, H. Chazono, and H. Kishi, “Effect of Milling Process on Core-shell Microstructure and Electrical Properties for BaTiO_3$ -based Ni-MLCC,” J. Eur. Ceram. Soc., 21 1649-52 (2001).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.