최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Elastomers and composites = 엘라스토머 및 콤포지트, v.44 no.2, 2009년, pp.150 - 155
주동현 (전남대학교 치의학전문대학원 치과재료학교실 및 치과재료연구소) , 정영화 (전남대학교 치의학전문대학원 치과재료학교실 및 치과재료연구소) , 송호준 (전남대학교 치의학전문대학원 치과재료학교실 및 치과재료연구소) , 최창남 (전남대학교 응용화학공학부 및 촉매연구소) , 박영준 (전남대학교 치의학전문대학원 치과재료학교실 및 치과재료연구소)
This study examined the effects of the concentration variation of the silyl hydride (Si-H) functional group in polymethylhydrogen siloxane cross-linker and the vinyl-functional group in silicone prepolymer on the physical properties of the dental polyvinylsiloxane impression materials (PVS). When th...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
폴리비닐실록산 치과용 고무인상재란? | 폴리비닐실록산 치과용 고무인상재 (PVS)는 치과치료 시 치아와 구강조직의 형태 및 관계를 구강 외에서 재현할 수 있도록 음형을 제작하기 위해 사용되는 재료이다. 주원료는 비닐기를 갖는 폴리디메틸실록산 액상 실리콘 폴리머로 백금촉매 존재 하에서 상온 또는 구강온도 조건 하에서 가교제의 silyl hydride (Si-H) 그룹의 수소가 비닐기의 이중결합에 부가되어 연속적인 부가중합에 의해 고상의 탄성체로 바뀐다. | |
폴리디메틸실록산 액상 실리콘 폴리머의 장점은? | 3-9 원료인 폴리디메틸실록산 액상 실리콘 폴리머의 반응성은 다양한 범위를 가지며 가교제의 함량과 억제제나 촉매의 양을 변화시킴으로써 작업시간 및 경화속도를 쉽게 조절할 수 있는 장점이 있다.10,11 하지만, PVS의 조성변화가 물성변화에 미치는 영향을 밝히는 연구에 대해 보고된 문헌들은 많지 않은 실정이다. | |
폴리비닐실록산 치과용 고무인상재의 주원료는? | 폴리비닐실록산 치과용 고무인상재 (PVS)는 치과치료 시 치아와 구강조직의 형태 및 관계를 구강 외에서 재현할 수 있도록 음형을 제작하기 위해 사용되는 재료이다. 주원료는 비닐기를 갖는 폴리디메틸실록산 액상 실리콘 폴리머로 백금촉매 존재 하에서 상온 또는 구강온도 조건 하에서 가교제의 silyl hydride (Si-H) 그룹의 수소가 비닐기의 이중결합에 부가되어 연속적인 부가중합에 의해 고상의 탄성체로 바뀐다.1,2 그러므로 PVS는 반응 부산물이 없어서 치과용 탄성 인상재 중 체적안정성이 가장 뛰어난 재료이다. |
A. G. Andreopoulos, G. L. Polyzois, and P. P. Demetriou, 'Shrinkage mechanism of elastomeric impression materials', J. Mater. Sci. Lett., 7, 235 (1988)
J. H. Lai, L. L. Wang, C. C. Ko, R. L. DeLong, and J. S. Hodges, 'New organosilicon maxillofacial prosthetic materials', Dent. Mater., 18, 281 (2002)
K. J. Anusavice, 'Skinner's science of dental materials', 11th ed., p. 205-231, Saunders Press, St. Louis, 2003
R. G. Craig and J. M. Powers, 'Restorative dental material', 11th ed., p. 353-365, Mosby Inc. Press, St. Louis, 2002
G. H. Johnson and R. G. Craig, 'Accuracy of four types of rubber impression materials compared with time of pour and a repeat pour of models', J. Prosthet. Dent., 53, 484 (1985)
R. G. Craig, 'Evaluation of an automatic mixing system for an addition silicone impression material', J. Am. Dent. Assoc., 110, 213 (1985)
A. M. Lacy, H. Fukui, T. Bellman, and M. D. Jendresen, 'Timedependent accuracy of elastomer impression materials. Part II:Polyether, polysulfides, and polyvinylsiloxane', J. Prosthet. Dent., 45, 329 (1981)
G. L. Yeh, J. M. Powers, and R. G. Craig, 'Properties of addition-type silicone impression materials', J. Am. Dent. Assoc., 101, 482 (1980)
J. F. McCabe and H. J. Wilson, 'Addition curing silicone rubber impression materials. An appraisal of their physical properties', Brit. Dent. J., 145, 17 (1978)
W. Finger and M. Ohsawa, 'Effect of mixing ratio on properties of elastomeric dental impression materials' Dent. Mater., 2, 183 (1986)
J. G. Stannard and R. G. Craig, 'Modifying the setting rate of an addition-type silicone impression material', J. Dent. Res., 58, 1377 (1979)
H. Makoto, K. Naoyuki , K. Michio, I. Kazunori, and H. Hisao, 'The effect of filler content on properties of polyaddition-type silicone impression material', Dent. Mater. J., 9, 326 (1990)
J. R. Williams and R. G. Craig, 'Physical properties of addition silicones as a function of composition', J. Oral. Rehabil., 15, 639 (1988)
오영일, 한경아, 정경호, 김경남, 조리라, '실리콘 고무인상재 개발을 위한 기초연구', Elastomer, 25, 19 (2000)
T. Aziz, W. Mark, and J. Robert, 'Development of a new poly(dimethylsiloxane) maxillofacial prosthetic material', J. Biomed. Mater. Res. B. Appl. Biomater., 65B, 252 (2003)
T. Aziz, M. Waters, and R. Jagger, 'Analysis of the properties of silicone rubber maxillofacial prosthetic materials', J. Dent., 31, 67 (2003)
L. A. Kroupa, U.S. Patent 4535141 (1984)
P. Hittmair, W. Hechtl, E. Louis, and E. Wohlfarth, U.S. Patent 4035453 (1977)
K. J. Wynne and J. M. Lambert, 'Encyclopedia of biomaterials and biomedical engineering; Silicones', p. 1348-1362, Marcel Dekker Press, New York, 2004
J. M. Uilk, A. E. Mera, R. B. Fox, and K. J. Wynne, 'Hydrosilation-cured poly(dimethylsiloxane) networks: Intrinsic contact angles via dynamic contact angle analysis', Macromolecules, 36, 3689 (2003)
Council on Dental Materials and Devices, 'Revised American Dental Association specification No. 19 for non-aqueous, elastomeric dental impression materials', J. Am. Dent. Assoc., 94, 733 (1977)
ASTM Committee. Standard test methods for vulcanized rubber and thermoplastic rubbers and thermoplastic elastomers- Tension [D412-98]. New York: American National Standards Institute, 1998
R. G. Craig, N. J. Urquiola, and C. C. Liu, 'Comparison of commercial elastomeric impression materials', Operat. Dent., 15, 94 (1990)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.