최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.33 no.8 = no.287, 2009년, pp.807 - 812
곽시영 (한국생산기술연구원 사이버설계센터) , 임채호 (한국생산기술연구원 사이버설계센터) , 백재욱 (한국델파이주식회사)
Most structure engineers give the casting components over-estimated factor of safety without any reasonable foundation due to the worries about the unavoidable defects such as shrinkages and porosity in castings; the engineers have little knowledge on the relation between the defect and structural b...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
주조 공정의 단점은? | 주조는 액체금속을 응고시켜서 고체금속을 만드는 공정으로 변형저항이 가장 적은 액체상태의 금속을 이용하기 때문에 아무리 복잡한 형상도 쉽게 제조할 수 있는 특징이 있다. 하지만 액체 금속이 고체 금속으로 응고하는 과정은 필연적으로 체적변화를 수반하게 되고 수축공과 같은 내부결함을 내포하게 된다. | |
주조란 무엇인가? | 주조는 액체금속을 응고시켜서 고체금속을 만드는 공정으로 변형저항이 가장 적은 액체상태의 금속을 이용하기 때문에 아무리 복잡한 형상도 쉽게 제조할 수 있는 특징이 있다. 하지만 액체 금속이 고체 금속으로 응고하는 과정은 필연적으로 체적변화를 수반하게 되고 수축공과 같은 내부결함을 내포하게 된다. | |
주조의 특징은? | 주조는 액체금속을 응고시켜서 고체금속을 만드는 공정으로 변형저항이 가장 적은 액체상태의 금속을 이용하기 때문에 아무리 복잡한 형상도 쉽게 제조할 수 있는 특징이 있다. 하지만 액체 금속이 고체 금속으로 응고하는 과정은 필연적으로 체적변화를 수반하게 되고 수축공과 같은 내부결함을 내포하게 된다. |
Gooider, J. N., 1933, 'Concentration of Stress Around Spherical and Cylindrical Inclusions and Flaws,' Trans ASME Applied Mechanics Section, Vol. 55, A-39
Sadowsky, M. A. and Sternberg, E., 1947, 'Stress Concentration Around an Ellipsoidal Cavity in an Infinite Body Under Arbitrary Plane Stress Perpendicular to the Axis of Revolution of the Cavity,' Journal of Applied Mechanics, Vol. 14, pp.191~210
Sadowsky, M. A. and Sternberg, E., 1949, 'Stress Concentration Around a Triaxial Ellipsoidal Cavity,' Journal of Applied Mechanics, Vol. 16, pp.149~157
Sunmitomo, T., Caceres, C. H. and Veidt, M., 2002, 'The Elastic Modulus of Cast Mg-Al-Zn Alloys,' Journal of light metals, pp.49~56
Hardin, R. A., Huff, R. K. and Bechermann, C., 2006, 'Integrated Design of Steel Casting for Service Performance,' Proceeding Of the 11th Int. Conf. On Modeling of Casting, Welding and Advanced Solidification Processes-XI, pp. 653~660
Kwak, S. Y., Cheng, J., Kim, J. T. and Choi, J. K., 2008, Structural Analysis Considering Shrinkage Defect of Casting Part,' International Journal of Cast Metals Research, Vol. 21, No.1~3, pp. 419~423
ImageWareTM NX User Guide, Imageware Products, July, 2003, 'Basic Procedures/Processing point, Creat new curves& surfaces.'
Khachiyan, L. G., 'Rounding of Polytopes in the Real Number Model of Computation,' Mathematics of Operations Research, Vol. 21, pp. 307~320
Kumar, P. and Yildirim, E. A., 2005, 'Minimum Volume Enclosing Ellipsoids and Core Sets, Journal of Optimization Theory and Applications, Vol. 126, No. 1, pp. 1~21
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.