참고문헌 (35)

1. 권오성 (2004), 암반의 풍화도가 암반근입말뚝의 지지거동에 미치는 영향, 박사학위논문, 서울대학교 

2. 김태형 (2008), Hoek-cell 압축시험을 통한 암반에 근입된 현장타설말뚝의 선단 하중전이함수 제안, 석사학위논문, 연세대학교 

3. 전경수 (2000), 풍화암에 근입된 현장타설말뚝의 연직 및 횡방향 지지거동 분석, 박사학위논문, 서울대학교 

4. 조천환, 이명환, 김성회 (2003), "국내 현장타설말뚝의 주면 접촉부에 대한 일정강성도 전단시험" 한국지반공학회 정기학술대회, pp.147-152 

5. AASHTO (1996), Standard Specifications for Highway Bridges, 16th Ed., American Association of State Highway and Transportation Officials, Washington, D.C 

6. Alehossein, H., Carter, J. P., and Booker, J. R. (1992), "Finite element analysis of rigid footings on jointed rock", Proc., 3rd Int. Conf. on Comp. Plasticity, Vol.1, pp.935-945 

7. ARGEMA (1992), Design guides for offshore structures : Offshore pile design, ED: P. L. Tirant, Editions Technip, Paris, France 

8. Armalesh, S. and Desai, C. S. (1987), "Load-Deformation Response of Axially Loaded Piles", Journal of Geotechnical Engineering Division, ASCE, Vol.113, No.GT12, pp.1483-1500 

   상세보기

9. Baquelin, F. (1982), "Rules for the structural design of foundations based on the selfboring pressuremeter test", Symp. on the Pressuremeter and Its Marine Application, IFP, Paris, pp.347-362 

10. Baquelin, F., Frand, R., and Jezequel, J. F. (1982), "Parameters for friction piles in marine soils", 2nd International Conference in Numerical Methods for Offshore Piling, Austin, April 

11. Booker, J. R. (1991), "Analytical methods in geomechanics", Proc., 7th Int. Conf. on Comp. Methods and Advances in Geomech., Balkema, Rotterdam, The Netherlands, Vol.1, pp.3-14 

12. Canadian Geotechnical Society (1985), Foundation Engineering Manual, Part 2(2nd ed), Canadian Geotechnical Society, Vancouver, Canada 

13. Carter, J.P. and Kulhawy, F.H. (1988), Analysis and design of drilled shaft foundations socketed into rock, Final report, EL 5918/ Project 1493-4 / Electric Power Research Institute, Conell Univ., Ithaca, NY 

14. Castelli, F., Maugeri, M., and Motta, E. (1992), "Analisi non lineare del cedimento di un Palo Singolo", Rivista Italiana di Geotechnica, Vol.26(2), pp.115-135 

15. Coates, D. F. (1967), Rock mechanics principles, Energy, Mines and Resources, Ottawa, Canada, Monograph 874 

16. De Beer, E. (1986), "Different behavior of bored and driven piles", Proc. of 6th Danubian Conf. on Soil Mech. and Found. Eng., pp.307-318 

17. FHWA (1999), Drilled Shafts: Construction Procedures and Design Methods, FHWA Publication No. FHWA-IF-99-025, Department of Transportation, Federal Highway Administration, Office of Implementation, McLean, VA 

18. Fioravante, V., Jamiolkowski, M. and Pedroni, S. (1994), "Modelling the behaviour of Piles in sand subjected to axial load", Int. Conf. Centrifuge, pp.455-460, Balkema, Rotterdam 

19. Geotechnical Engineering Office (1996), Pile design and construction (GEO Publication No. 1/96), Geotechnical Engineering Office, Hong Kong, 348p 

20. Ghionna, V. N., Jamiolkowski, M., Lancellotta, R., and Pedroni, S. (1993), "Base capacity of bored piles in sands from in situ tests",Proc., 2nd Int. Geotech. Seminar on Deep Found. on Bored and Augered Piles, Balkema, Rotterdam, Brookfield, pp.67-75 

21. Gwizdala, K. (1984), Determination of the Bearing Capacity and Settlement from the Results of Static Penetration Tests CPT and Standard Penetration Tests SPT, Report No. 26, Swedish Geotechnical Institute, Linkoping, pp.1-129 

22. Itasca Consulting Group, Inc. (1997), FLAC, Fast Lagrangian Analysis of Continua, Ver. 3.3, Vol. I : User's Manual. Itasca Consulting Group, INC 

23. Kerisel, J. (1958), "La mecanique des sols: recherches et investigation recentes", Rev. Trav., Paries, pp.874-878 

24. Kim, S. I., Jeong, S. S., Cho, S. H., and Park, I. J. (1999), "Shear Load Transter Characteristics of Drilled Shafts in Weathered Rocks", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.125(11), pp.999-1010 

    상세보기

25. O'Neill, M. W., and Hassan, K. M. (1994), "Drilled shaft : effects of construction on performance and design criteria", Proceedings of the International Conference on Design and Construction of Deep Foundations, Federal Highways Administration, Washington D.C., Vol.1, pp.137-187 

26. Priest, S. D., and Hudson, J. A. (1976), "Discontinuity spacings in rock", International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, Vol.13, pp.135-148 

    상세보기

27. Randolph, M.F., and Wroth, C. P. (1978), "Analysis of Deformation of Vertically Loaded Piles", Journal of the Geotechnical Engineering Division, ASCE, Vol.104, No.GT12, pp.1465-1488 

28. Reese, L. C., and O'Neill, M. W. (1988), Drilled shafts : Construction procedures and design methods, Publ. No. FHWA-HI- 88-042, Federal Highway Administration, Washington, D. C 

29. Rowe, P. K., and Armitage, H. H. (1987), "Theoretical Solutions for Axial Deformation of Drilled Shafts in Rock", Canadian Geotechnical Journal, Vol.24, pp.114-125 

    상세보기

30. Seol, H. I, Jeong, S. S., Cho, C. H., and You, K. H. (2008). "Shear Load Transfer for Rock-Socketed Drilled Shafts based on Borehole Roughness and Geological Strength Index (GSI)", International Journal of Rock Mechanics and Mining Sciences. Vol.45, pp.848-861 

    상세보기

31. Teng, W. C. (1962), Foundation Design, Prentice-Hall Inc., Englewood Cliffs, N. J 

32. Timoshenko, S. P., and Goodier, J. N. (1970), Theory of Elasticity, 3ed Ed., McGraw-Hill Book Co., pp.403-409 

33. Williams, A.F., Johnston, I. W., and Donald, I. B. (1980), "The design of socketed piles in weak rock", Proceedings of international conference on structural foundations on rock, Balkema, Sydney, pp.327-347 

34. Yu, H. S., and Sloan, S. W. (1994), "Bearing capacity of jointed rock", Proc., 8th Int. Conf. on Comp. Methods and Advances in Geomech., Balkema, Rotterdam, The Netherlands, Vol.3, pp.2403-2408 

35. Zhang, L, and Einstein, H. H. (1998), "End bearing capacity of drilled shafts in rock", Journal of Geotechnical and Geoenvironmental Engineering, Vol.124, No.7, pp.574-584 

    상세보기

저자의 다른 논문 :

조후연 (1) 정상섬 (132) 설훈일 (5)