본 연구에서는 여러 가지 열처리 온도에서 다성분 도핑에 의한 광촉매의 밴드갭 저감 및 가시광광분해 효과를 알아보고자 tetraethylammonium tetrafluoroborate (TEATFB)로 B, C, N, F 등이 동시에 도핑된 $TiO_{2}$ 광촉매를 제조하였다. 도핑된 $TiO_{2}$ 광촉매가 가시광선영역에서 분해되는 정도를 확인하기 위해서 태양광에 조사하여 rhodamine B와 acridine orange로 염료분해 실험을 수행하였다. XRD 결과 $800^{\circ}C$ 이하에서 열처리된 $TiO_{2}$ 광촉매는 anatase 구조가 존재하고 있음을 알 수 있었다. XPS 분석을 통하여 광활성에 영향을 미치는 B, C, N, F의 결합구조를 확인하였고 UV-DRS 결과로부터 다성분 도핑된 $TiO_{2}$ 광촉매의 밴드 갭이 2.98 eV로 줄어든 것을 알 수 있었다. 다성분 도핑 $TiO_{2}$의 태양광 조사에 의한 UV-Vis 결과에서 acridine orange에 대한 광분해 효과가 도핑되지 않은 샘플에 비해 1.61배 증가함을 알 수 있었다. 특히, 다성분이 동시 도핑되고 $700^{\circ}C$에서 열처리된 샘플이 acridine orange과 rhodamine B 두 가지 염료 모두에서 가장 좋은 광분해 효과를 보여 주었다.
본 연구에서는 여러 가지 열처리 온도에서 다성분 도핑에 의한 광촉매의 밴드갭 저감 및 가시광 광분해 효과를 알아보고자 tetraethylammonium tetrafluoroborate (TEATFB)로 B, C, N, F 등이 동시에 도핑된 $TiO_{2}$ 광촉매를 제조하였다. 도핑된 $TiO_{2}$ 광촉매가 가시광선영역에서 분해되는 정도를 확인하기 위해서 태양광에 조사하여 rhodamine B와 acridine orange로 염료분해 실험을 수행하였다. XRD 결과 $800^{\circ}C$ 이하에서 열처리된 $TiO_{2}$ 광촉매는 anatase 구조가 존재하고 있음을 알 수 있었다. XPS 분석을 통하여 광활성에 영향을 미치는 B, C, N, F의 결합구조를 확인하였고 UV-DRS 결과로부터 다성분 도핑된 $TiO_{2}$ 광촉매의 밴드 갭이 2.98 eV로 줄어든 것을 알 수 있었다. 다성분 도핑 $TiO_{2}$의 태양광 조사에 의한 UV-Vis 결과에서 acridine orange에 대한 광분해 효과가 도핑되지 않은 샘플에 비해 1.61배 증가함을 알 수 있었다. 특히, 다성분이 동시 도핑되고 $700^{\circ}C$에서 열처리된 샘플이 acridine orange과 rhodamine B 두 가지 염료 모두에서 가장 좋은 광분해 효과를 보여 주었다.
In this study, boron, carbon, nitrogen and fluorine co-doped $TiO_{2}$ photocatalysts using tetraethylammonium tetrafluoroborate (TEATFB) have been prepared by different heat treatment temperatures to decrease the band gap. To explore the visible light photocatalytic activity of the novel...
In this study, boron, carbon, nitrogen and fluorine co-doped $TiO_{2}$ photocatalysts using tetraethylammonium tetrafluoroborate (TEATFB) have been prepared by different heat treatment temperatures to decrease the band gap. To explore the visible light photocatalytic activity of the novel low‐zband gap $TiO_{2}$ photocatalyst, the removal of two dyes was investigated, namely, acridine orange and rhodamine B. XRD patterns demonstrate that the samples calcined at temperatures up to $800^{\circ}C$ clearly show anatase peaks. The XPS results show that all the doped samples contain N, C, B and F elements and the doped $TiO_{2}$ shows the shift in the band gap transition down to 2.98 eV as UV-DRS results. In these UV-Vis results, photocatalytic activity of the doped $TiO_{2}$ is 1.61 times better than undoped $TiO_{2}$. Specially, excellent photoactivity results were obtained in the case of samples treated at $700^{\circ}C$.
In this study, boron, carbon, nitrogen and fluorine co-doped $TiO_{2}$ photocatalysts using tetraethylammonium tetrafluoroborate (TEATFB) have been prepared by different heat treatment temperatures to decrease the band gap. To explore the visible light photocatalytic activity of the novel low‐zband gap $TiO_{2}$ photocatalyst, the removal of two dyes was investigated, namely, acridine orange and rhodamine B. XRD patterns demonstrate that the samples calcined at temperatures up to $800^{\circ}C$ clearly show anatase peaks. The XPS results show that all the doped samples contain N, C, B and F elements and the doped $TiO_{2}$ shows the shift in the band gap transition down to 2.98 eV as UV-DRS results. In these UV-Vis results, photocatalytic activity of the doped $TiO_{2}$ is 1.61 times better than undoped $TiO_{2}$. Specially, excellent photoactivity results were obtained in the case of samples treated at $700^{\circ}C$.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.