최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國染色加工學會誌 = Textile coloration and finishing, v.22 no.4, 2010년, pp.362 - 372
박준형 (영남대학교 섬유패션학부) , 김정현 (영남대학교 섬유패션학부) , 김승진 (영남대학교 섬유패션학부)
This paper surveys the physical properties of the multiwall carbon nanotube (MWNT) and polyurethane composite film for improvement of mechanical properties and electrical characteristics. The modification of MWNT was carried out by acid treatment with nitric and sulphuric acid mixed solution, and th...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
CNT와 고분자 복합체의 응용을 위한 연구는 어떤 고분자들 위주로 이루어지고 있는가? | 현재 CNT와 고분자 복합체의 응용을 위한 연 구는 폴리비닐리덴(Polyvinylidene), 에폭시(epoxy), 폴리프로필렌(Polypropylene), 폴리우레탄(Polyurethane) 등 다양한 고분자들과 이루어지고 있으며, 응용 하는 고분자의 특성에 따라 인장강도, 탄성계수 등에서 다른 결과가 나타나고 있다2,15-17). 또한 전기적 특성의 응용을 위한 복합체 제조의 경우 폴리피롤(Polypyrrole), 폴리메틸메타크릴레이트(Polymethylmethacrylate, PMMA) 등 수많은 다양한 고분자를 이용하여 전기전도성 복합체를 제조해 정전기 방지제품 및 정전도장 (electrostatic painting, 靜電塗裝), 초고용량 캐패시터(supercapacitor) 분야에 응용하려는 연구가 진행되고 있다18-21). | |
전기적 특성의 응용을 위한 복합체 제조를 위해서는 어떤 연구가 이루어지고 있는가? | 현재 CNT와 고분자 복합체의 응용을 위한 연 구는 폴리비닐리덴(Polyvinylidene), 에폭시(epoxy), 폴리프로필렌(Polypropylene), 폴리우레탄(Polyurethane) 등 다양한 고분자들과 이루어지고 있으며, 응용 하는 고분자의 특성에 따라 인장강도, 탄성계수 등에서 다른 결과가 나타나고 있다2,15-17). 또한 전기적 특성의 응용을 위한 복합체 제조의 경우 폴리피롤(Polypyrrole), 폴리메틸메타크릴레이트(Polymethylmethacrylate, PMMA) 등 수많은 다양한 고분자를 이용하여 전기전도성 복합체를 제조해 정전기 방지제품 및 정전도장 (electrostatic painting, 靜電塗裝), 초고용량 캐패시터(supercapacitor) 분야에 응용하려는 연구가 진행되고 있다18-21). | |
PU/MWNT 발포용 필름 제조에 대한 연구에서, 흡광도 측면에서 가장 효율적인 분산조건은 어떠했는가? | 1. PU/MWNT 필름의 흡광도를 측정한 결과 MWNT 의 함유량 대비 흡광도를 보았을 때 함유량 2wt%, 분산시간 2시간일 때 흡광도 값은 2∼ 2.5이고 24시간일 때는 3∼3.2의 흡광도 값을 보였다. 그러나 MWNT의 분산시간의 효율적인 면을 보았을 때 함유량 2wt%, 분산시간 2시간 일 때 가장 효율적인 분산조건으로 나타났다. |
M. J. O'Connell, "Carbon Nanotube Properties and Applications", New York, U.S.A., pp.3-25, 2006.
M. Jung, and J. W. Cho, Mechanical, Thermal and Electrical Properties of Carbon Nanotube- Polyurethane Nanocomposites, Journal of Korean Fiber Society, 41(2), 73-79(2004).
J. I. Lee, and H. T. Jung, Technical Status of Carbon Nanotubes Composites, Korean Chem. Eng. Res., 46(1), 7-14(2008).
I. W. Chiang, B. E. Brinson, R. E. Smalley, J. L. Margrave, and R. H. Hauge, Purification and Characterization of Single-Wall Carbon Nanotubes, J. Phys. Chem. B, 105, 1157-1161(2001).
C. Park, Z. Ounaies, K. A. Watson, R. E. Crooks, J. Smith Jr., S. E. Lowther, J. W. Connell, E. J. Siochi, J. S. Harrison, and T. L. St. Clair, Dispersion of Single Wall Carbon Nanotubes by In Situ Polymerization Under Sonication, Chemical Physics Letters, 364, 303-308(2002).
K. Mukhopadhyay, C. D. Dwivedi, and G. N. Mathur, Conversion of Carbon Nanotubes to Carbon Nanofibers by Sonication, Carbon, 40, 1369-1383(2002).
P. Potschke, A. R. Bhattacharyya, and A. Janke, Melt Mixing of Polycarbonate with Multiwalled Carbon Nanotubes: Microscopic Studies on the State of Dispersion, European Polymer Journal, 40, 137-148(2004).
X. L. Xie, Y. W. Mai, and X. P. Zhou, Dispersion and Alignment of Carbon Nanotubes in Polymer Matrix: A review, Materials Science and Engineering, R49, 89-112(2005).
E. T. Mickelson, C. B. Huffman, A. G. Rinzler, R. E. Smalley, R. H. Hauge, and J. L. Margrave, Fluorination of Single-Wall Carbon Nanotubes, Chemical Physics Letters, 296, 188-194(1998).
A. Hirsch, Functionalization of Single-Walled Carbon Nanotubes, Chem. Int. Ed., 41, 1853-1859(2002).
M. Olek, M. Hilgendorff, and M. Giersig, A Simple Route for the Attachment of Colloidal Nanocrystals to Noncovalently Modified Multiwalled Carbon Nanotubes, Colloid and Surfaces A: Physicochem. Eng. Aspects, 292, 83-85(2007).
H. Kitano, K. Tachimoto, and Y. Anraku, Functionalization of Single-Walled Carbon Nanotube by Covalent Modification with Polymer Chains, Journal of Colloid and Interface Science, 306, 28-33(2007).
A. G. Osorio, I. C. L. Silveira, V. L. Bueno, and C. P. Bergmann, $H_{2}SO_{4}/HNO_{3}/HCI-Functionalization$ and Its Effect on Dispersion of Carbon Nanotubes in Aqueous Media, Applied Surface Science, 255, 2485-2489(2008).
L. S. Schadler, S. C. Giannaris, and P. M. Ajayan, Load Transfer in Carbon Nanotube Epoxy Composites, Applied Physics Letters, 73, 3842-3844(1998).
Z. Jin, K. P. Pramoda, S. H. Goh, and G. Xu, Poly(vinylidene fluoride)-Assisted Melt-Blending of Multi-Walled Carbon Nanotube/Poly(methylmethacrylate) Composites, Materials Research Bulletin, 37, 271-278(2002).
D. Xu and Z. Wang, Role of Multi-Wall Carbon Nanotube Network in Composites to Crystallization of Isotactic Polypropylene Matrix, Polymer, 49, 330-338(2008).
K. Jurewicz, S. Delpeux, V. Bertagna, F. Beguin, and E. Frackowiak, Sopercapacitors from Nanotubes/ Polypyrrole Composites, Chemical Physics Letters, 347, 36-40(2001).
N. G. Sahoo, Y. C. Jung, H. J. Yoo, and J. W. Cho, Influence of Carbon Nanotubes and Polypyrrole on the Thermal, Mechanical and Electroactive Shape-Memory Properties of Polyurethane Nanocomposites, Composite Science and Technology, 67, 1920-1929(2007).
E. Kymakis, I. Alexandou, and G. A. J. Amaratunga, Single-Walled Carbon Nanotube- Polymer Composites: Electrical, Optical and Structural Investigation, Synthetic Metals, 127, 59-62(2002).
A. Ilcham, A. Srisurichan, A. Soottitantawat, and T. Charinpanitkul, Dispersion of Multi- Walled Carbon Nanotubes in Poly(p-phenylene) thin Films and Their Electrical Characteristics, Particuology, 7, 403-407(2009).
Y. M. Tsai, T. L. Yu, and Y. H. Tseng, Physical Properties of Crosslinked Polyurethane, Polymer International, 47, 445-450(1998).
S. Y. Lee, Y. C. Jung, J. W. Cho, and B. C. Chun, Synthesis and Characteristics of Carbon Nanotube Nanocomposites Crosslinked with Polyurethane, Textile Science and Engineering, 45(4), 247-253(2008).
H. G. Im, H. M. Kim, and J. H. Kim, Dispersity of CNT and GNF on Polyurethane Matrix: Effect of Polyurethane Chemical Structure, Polymer(Korea), 32(4), 340-346(2008).
J. W. Kim, Y. C. Jung, and J. W. Cho, Carbon Nanotube-Polyurethane Nanocomposites Having Characteristics of Electroactive Shape Recovery, Textile Science and Engineering, 42(4), 270-276(2005).
G. Y. Park, J. S. Kim and Y. J. Jeong, Comparison of Characteristic of Multi-walled Carbon Nanotubes Functionalized Using Various Methods, Textile Science and Engineering, 45, 359-362(2008).
J. M. Park, D. S. Kim, S. J. Kim, P. G. Kim, D. J. Yoon, and K. L. Devries, Inherent Sensing and Interfacial Evaluation of Carbon Nanofiber and Nanotube/Epoxy Composites Using Electrical Resistance Measurement and Micromechanical Technique, Composites: Part B, 38, 847-861 (2007).
J. H. Ko, J. C. Kim, and J. H. Chang, Ultrahigh Molecular Weight Polyethylene Hybrid Films with Functionalized-MWNT : Thermomechanical Properties, Morphology, Gas Permeability, and Optical Transparency, Polymer(Korea), 33(2), 97-103(2009).
P. C. Ma, B. Z. Tang, and J. K. Kim, Effect of CNT Decoration with Silver Nanoparticles on Electrical Conductivity of CNT-Polymer Composites, Carbon, 46, 1497-1505(2008).
J. H. Kook, K. U. Jeong, J. S. Yang, D. H. Park, J. H. Go, and C. W. Nah, Preparation and Physical Properties of Poly(ethylene-co-ethyl acrylate)/Carbon Nanotube Nanocomposites, J. Korean Ind. Eng. Chem., 19(2), 161-167(2008).
Y. H. Lee, The Physical Property and Application of Carbon Nanotube, Sea Mulli(The Korean Physical Society), 51(2), 84-144(2005).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.