최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.34 no.5=no.296, 2010년, pp.589 - 596
심광보 (고려대학교 기계공학과) , 배홍열 (고려대학교 기계공학과) , 전준영 (고려대학교 기계공학과) , 송태광 (고려대학교 기계공학과) , 김윤재 (고려대학교 기계공학과)
In this study, we calculate the welding residual stresses for a butt-welded thin-walled plate by carrying out three-dimensional finite-element analyses. To study the effect of mechanical boundary conditions on the welding residual stresses, various boundary conditions are considered. The welding res...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
열해석을 위해 필요한 재료 물성은 무엇인가? | 열해석을 위한 재료 물성들은 재료의 열전도, 비열, 잠열, 밀도 등이 필요하며, 이들에 대한 값들은 Fig. 2에잘 나타나 있다. | |
연료의 효율성 및 속도 증가를 위해 요구되는 것은 무엇인가? | 이러한 상황에서 최근에 선박과 같은 구조물에서 연료의 효율성 및 속도 증가를 위해서 선박의 전체적인 무게를 감소시키려고 하고 있으며, 이러한 요구는 사용되어지는 철판(panel)의 두께를 점점 얇아지도록 만들고 있는 상황이다. | |
연료의 효율성 및 속도 증가를 위해 철찬의 두께를 얇아지게 만드는 상황으로 인해 나타나는 문제는 문엇인가? | 이러한 현실에서 잘못된 설계로 인해서 얇은 철판(panel)들의 맞대기 용접을 진행하여 접합함에 있어서 용접 진행간 발생하는 열 응력에 의해서과도한 변형이 일어나며, 이를 보정하기 위해서 막대한 수선비용을 초래하는 경우가 발생하고 있다. 이러한 문제들을 사전에 예방하기 위해서는 다양한 용접재, 용접방법에 대한 실험을 통해서 올바른 설계가 진행되어야만 한다. |
British Energy Generation Ltd., 2007 “R6: Assessment of the Integrity of Structures Containing Defects,” Revision 4.
ABAQUS, 2007, “ABAQUS Standard/User’s Manual, Version 6.7,” ABAQUS, Inc.
Tsunori, M., Dye, D., Davies, C. M. and Nikbin, K. M., 2008, “Numerical Modelling of Residual Stress and Disrottion in Welded Thin Steel Plates,” ASME PVP Conference, PVP2008-61170.
Song, T.K., Bae, H.Y., Kim, Y.J., Lee, K.S. and Park, C.Y., 2008, “Sensitivity Analyses of Finite Element Method for Estimating Residual Stress of Dissimilar Metal Multi-Pass Welding,” Trans. of the KSME(A), Vol. 32, No. 9, pp.770-781.
Kim, Y.J., Shim, D.J., Nikbin, K., Kim, Y.J., Hwang, S.S. and Kim, J.S., 2003, “Finite Element Based Plastic Limit Loads for Pipes with Part-Through Surface Cracks Under Combined Loading,” Int J. of Pres. Ves. and Pip., Vol. 80, pp.527-540.
Rui Wang, Jianxun Zhang, Hisashi Serizawa and Hidekazu Murakawa, 2009, “Study of Welding Inherent Deformations in Thin Plates Based on Finite Element Analysis Using Interactive Substructure Method,” Elsevier Ltd.
Davies, C. M., Beres, M., Hughes, D., Dye, D. and Nikbin, K. M. 2009, “The Influence of Geometric and Welding Parameters on Residual Stress in Thin Welded Steel Structures,” ASME PVP conference, PVP2009-77181.
Davies, C. M., Wimpory, R. C., Dye, D. and Nikbin., K. M., 2008, “The Effects of Plate Dimensions on Residual Stresses in Welded Thin Steel Plates,” ASME PVP conference, PVP2008-61200.
Dean Denga, Wei Liang and Hidekazu Murakawa, 2006, “Determination of Welding Deformation in Fillet-Welded Joint by Means of Numerical Simulation and Comparison with Experimental Measurements,” Elsevier B.V.
Yu LUO, Hidekazu MURAKAWA and Yukio UEDA, “Prediction of Welding Deformation and Residual Stress by Elastic FEM Based on Inherent Strain(Report 1).JWRI
Davies, C. M., Beres, M., Hughes, D., Dye, D., Nikbin, Wimpory, K. M., R. C., Lightfoot, M. P., Oliver, E., O’Dowd, N. P. and Bruce., G. J., 2007, “The Effect of Residual Stress and Microstructure on Distortion in Thin Welded Steel Plates,” ASME PVP Conference, PVP2007-26193.
TSAI, C. L., PARK, S. C. and CHENG., W. T., 1999, “Welding Distortion of a Thin-Plate Panel Structure,” Welding Research Supplement, pp. 156-165.
Choong-Gi Kim, Jae-Woong Kim and Ki-Chul Kim, 2007, “A Study on the Distortin of a Thin Plate Panel by Laser Welding,” Journal of KWJS. Vol.25. No. 1, Feb.2007.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.