최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기암석학회지 = The journal of the petrological society of korea, v.19 no.1 = no.59, 2010년, pp.51 - 65
The Dongmakgol Tuff is a stratigraphic unit which is composed of voluminous ignimbrites in the Cheolwon basin. The ignimbrites belong to pumice-rich vitric tuffs that show eutaxitic to parataxitic fabrics from fiamme or pumice clasts. They are almost densely welded and strongly flattened, but often ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
화쇄류에 의한 퇴적물은 주로 무엇으로 구성되어 있는가? | 화쇄류에 의한 퇴적물들은 주로 암편, 유리질편, 결정 혹은 결정편으로 구성되어 있다. 이중에서 유리질편은 화쇄류의 높은 온도에 의해서 용결되어 편평화되는 경우가 많다. | |
경기육괴와 임진강대의 경계부근의 철원분지 백악기 화산암류의 화산학 연구가 거의 수행되지 않았던 이유는 무엇인가? | 경기육괴와 임진강대의 경계부근의 철원분지 백악기 화산암류는 조성이 현무암질에서 유문암질에 이르는 여러 응회암층들과 용암들로 구성되어 있다. 이화산암류는 여러 암층들이 서로 다른 공급지로부터 분출되거나 관입되어 있어 층서 구분이 매우 어려워 화산학 연구가 거의 수행되지 않았었다. | |
경기육괴와 임진강대의 경계부근의 철원분지 백악기 화산암류의 조성은 무엇으로 구성되어 있는가? | 경기육괴와 임진강대의 경계부근의 철원분지 백악기 화산암류는 조성이 현무암질에서 유문암질에 이르는 여러 응회암층들과 용암들로 구성되어 있다. 이화산암류는 여러 암층들이 서로 다른 공급지로부터 분출되거나 관입되어 있어 층서 구분이 매우 어려워 화산학 연구가 거의 수행되지 않았었다. |
기원서, 임순복, 김현철, 황상구, 김복철, 송교영, 김유홍, 2008, 연천도폭 지질조사 보고서. 한국지질자원연구원, 83p.
기원서, 조등룡, 김복철, 진광민, 2005, 포천도폭 지질조사 보고서. 한국지질자원연구원, 69p.
김광호, 송무영, 1995, 한반도 중서부 지각구조와 물성 연구: 전곡-연천 일대에 분포하는 백악기 화산암류의 고지 자기. 지구과학학회지, 16, 65-73.
김규한, 김옥준, 민경덕, 이윤수, 1984, 추가령 지구대의 지 질구조, 고지자기 및 암석학적 연구. 광산지질, 17, 215-230.
김재호, 2010, 연천 동부 동막골응회암의 화산학적 연구. 안동대학교 대학원 이학석사 학위논문, 55p.
이대성, 류기주, 김광호, 1983, 추가령 열곡 지구조적 해석. 지질학회지, 19, 19-38.
최위찬, 최성자, 박기화, 김규봉, 1996, 철원-마전리 지질조사 보고서. 한국자원연구소, 31p.
황상구, 이병주, A.J. Reedman, 2007, 청송 동부 주왕산응 회암의 유상선구조와 정치과정. 지질학회지 43, 463-476.
황재하, 김유홍, 2007, 지포리도폭 지질조사 보고서. 한국 지질자원연구원. 54p.
Branney, M.J. and Kokelaar, P., 1992, A reappraisal of ignimbrite emplacement: progressive aggradation and changes from particulate to non-particulate flow during emplacement of high-grade ignimbrite. Bull. Volcanol., 54, 504-520.
Branney, M.J. and Kokelaar, P., 2002, Pyroclastic density currents and the sedimentation of ignimbrites. London, Geol. Soc. Memoir 27, 143p.
Branney M.J., Barry, T.L. and Godchaux, M., 2004, Sheathfolds in rheomorphic ignimbrites. Bull. Volcanol., 66, 485-491.
Capaccioni, B. and Sarocchi, D., 1996, Computer-assisted image analysis on clast shape fabric from the Orvieto-Bagnoregio ignimbrite(Vulsini District, central Italy): implications on the emplacement mechanisms. J. Volcanol. Geotherm. Res., 70, 75-90.
Cas, R.A.F. and Wright, J.V., 1987, Volcanic succession, modern and ancient. Chapman & Hall, London, 528p.
Chapin, C.E. and Lowell, G.R., 1979, Primary and secondary flow structures in ash-flow tuffs of the Gribbles run paleovalley, Central Colorado. In Capin and Elston(eds.), Ash-flow tuff, 137-154.
Fisher, R.V., 1966, Rocks composed of volcanic fragments and their classification. Earth Sci. Rev., 1, 287-298.
Freundt, 1999, Formation of high-grade ignimbrites. Part II. A pyroclastic suspension current model with imbrications also for low-grade ignimbrites. Bull. Volcanol., 60, 545-576.
Freundt, A. and Schmincke, H.-U., 1986, Emplacement of small-volume pyroclastic flows at Laacher See(East-Eifel, Germany). Bull. Volcanol., 48, 39-59.
Froggatt, P.C., Wilson, C.J.N. and Walker, G.P.L., 1981, Orientation of logs in the Taupo Ignimbrite as indicator of flow direction and vent position. Geology, 9, 109-111.
Gibson, I.L. and Tazieff, H., 1967, Additional theory on the origin of fiamme in ignimbrites. Nature, 215, 1473-1474.
Lee, J.S., 1989, Petrology and tectonic setting of the Cretaceous to Cenozoic volcanics of Seoul, Korea: Geodynamic implication on the east Eurasian margin. Ph.D. thesis, Orleans University, 349p.
Le Pennec, J.-L., Bourdier, J.-L., Froger., J.-L., Temel, A., Camus, G. and Gourgaud, A., 1994, Neogene ignimbrites of the Nevsehir plateau (central Turkey): stratigraphy, distribution and source constraints. J. Volcanol. Geotherm. Res., 63, 59-87.
Mimura, K., 1984, Imbrication, flow direction and possible source areas of the pumice-flow tuffs near Bend, Oregon, U.S.A. J. Volcanol. Geotherm. Res., 21, 45-60.
Palladino, D.M. and Valentine, G.A., 1995, Coarse-tail vertical and lateral grading in pyroclastic flow deposits of the Latera Volcanic Complex(Vulsini, central Italy): origin and implications for flow dynamics. J. Volcanol. Geotherm. Res., 69, 343-364.
Potter, D.B. and Oberthal, C.M., 1987, Vent sites and flow directions of the Otowi ash flows(lower Bandelier Tuff), New Mexico. Geol. Soc. Am. Bull., 98. 66-76.
Ragan, D.M. and Sheridan, M.F., 1972, Compaction of the Bishop Tuff, California. Geol. Soc. Am. Bull., 83, 95-106.
Rhodes, R.C. and Smith, E.I., 1972, Distribution and directional fabric of ash-flow sheets in the north-western Mogollon plateau. New Mexico. Geol. Soc. Am. Bull., 83, 1863-1868.
Schmid, R., 1981, Descriptive nomenclature and classification of pyroclastic deposits and fragments: recommendations of the IUGS Subcommission on the Systematics of Igneous Rocks. Geology, 9, 41-43.
Schmincke, H.-U. and Swanson, D.A., 1967, Laminar viscous flowage structures in ash flow tuffs from Gran Canaria, Canary Islands. J. Geol., 75, 641-664.
Sparks, R.S.J., 1975, Stratigraphy and geology of the ignimbrites of Vulsini Volcano, Central Italy. Geol. Rundsch., 64, 497-523.
Suzuki, K. and Ui, T., 1982, Grain orientation and depositional ramps as flow direction indicators of a large-scale pyroclastic flow deposit in Japan. Geology, 10, 429-432.
Walker, G.P.L., 1981, Generation and dispersal of fine ash and dust by volcanic eruption. J. Volcanol. Geotherm. Res., 11, 81-92.
Wilson, C.J.N., 1985, The Taupo eruption, New Zealand II. The Taupo ignimbrite. Phil. Trans. R. Soc. Lond., A.314, 229-310.
Wolff, J.A. and Wright, J.V., 1981, Rheomorphism of welded tuffs. J. Volcanol. Geotherm. Res., 10, 13-34.
Wright, J.V., 1980, Stratigraphy and geology of the welded air-fall tuffs of Pantelleria, Italy. Geol. Rundsch., 69, 263-291.
Yokoyama, S., 1974, Flow and emplacement mechanism of the Ito pyroclastic flow from Aira caldera, Japan. Tokyo Kyoiku Daigaku Sci. Rep., C, 12, 17-62.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.