최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기복합재료 : 한국복합재료학회지 = Journal of the Korean Society for Composite Materials, v.23 no.3, 2010년, pp.58 - 63
장정훈 (한국기계연구원 부설 재료연구소) , 이진우 (한국기계연구원 부설 재료연구소) , 이원오 (한국기계연구원 부설 재료연구소) , 이학구 (한국기계연구원 부설 재료 연구소) , 엄문광 (한국기계연구원 부설 재료연구소) , 김진봉 (한국기계연구원 부설 재료연구소) , 변준형 (한국기계연구원 부설 재료연구소)
Tensile and flexural properties and electrical conductivity of MWCNT/epoxy composites with different aspect ratios of MWCNTs were compared. The MWCNT/epoxy mixtures were prepared by mechanical dispersion methods using a homomixer and a three-roll mill, and then composite samples were fabricated by c...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
강태준, 김동일, 허용학, 김용협, "탄소나노튜브의 선택적 딥코팅을 이용해 제작된 적층 복합재료의인장 물성에 대한 연구," 한국복합재료학회지, 제19권 제3호, 2006, pp. 23-28.
이상의, 박기연, 이원준, 김천곤, 한재흥, "다중벽 탄소나노 튜브가 첨가된 평직 유리섬유/에폭시 복합재료의 미세구조 및 전자기적 특성," 한국복합재료학회지,제19권 제1호, 2006, pp. 36-42.
Kim K.H., Jo W.H., "A strategy for enhancement of mechanical and electrical properties of polycarbonate/multi-walled carbon nanotube composites," Carbon, Vol. 47, 2009, pp. 1126-1134.
Ma P.C., Kim J. K., Tang B.Z., "Effects of functionalization on the properties of carbon nanotube/epoxy nanocomposites," Composites Science & Technology, Vol. 67, No. 14, 2007, pp. 2965-2972.
Lourie O, Cox D.E., Wagner H.D., "Buckling and colapse of embedded carbon nanotubes," Physical Review Letters, Vol. 81 , No. 8, 1998, pp. 1638-1641.
Kim Y.J., Shin T.S., Choi H.D., Kwon J. H., Chung Y, Yoon HG. "Electrical conductivity of chemically modified multiwalled carbon nanotube/epoxy composites," Carbon, Vol. 43, No. 1, 2005, pp. 23-30.
Gong X., Liu J., Baskaran S., Voise R.D., Young J.S, "Surfactant-assisted processing of carbon nanotube/polymer composite," Chemical Materials, Vol. 12, No. 4, 2000,pp. 1049-1052.
Bernadette A.H., WilIiam J.B., "Polycarbonate carbon nanofiber composites," European Polymer Journal, Vol. 41, 2005, pp. 889-893.
Iosif D.R., Suong V.H., "Highly conductive multiwall carbon nanotube and epoxy composites produced by three-roll milling," Carbon, Vol. 47, 2009, pp. 1958-1968.
Gojny F.H., Wichmann M.H.G., Kopke U., Fiedler B., Schulte K., "Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content," Composite Science & Technology, Vol. 64, 2004,pp. 2363-371
Nadler M., Werner J., Mahrholz T., Riedel U., Hufenbach W., "Effect of MWCNT surface functionalisation on the mechanical properties of multi-walled carbon nanotube/epoxy-composites." Composites: Part A, Vol. 40, 2009, pp. 932-937.
Wu Z., Li J., Timmer D., Lozano K., Bose S., "Study of processing variables on the electrical resistivity of conductive adhesives," Intemational Journal of Adhesion & Adhesives, Vol. 29, 2009, pp. 488-494.
Kenneth K.H.W., Martin Z.A., Jeffery L.H., Sabahudin H., John H.T.L., Wankei W., "The effect of carbon nanotube aspect ratio and loading on the elastic modulus of electrospun poly(vinyl alcohol)-carbon nanotube hybrid fibers," Carbon, Vol. 47, 2009, pp. 2571-2578.
Seyhan A.T., Metin T., Karl S., "Tensile mechanical behavior and fracture toughness of MWCNT and DWCNT modified vinyl-ester/polyester hybrid nanocomposites produced by 3-roll milling," Materials Science and Engineering A, Vol. 523, 2009, pp. 85-92.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.