최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國染色加工學會誌 = Textile coloration and finishing, v.22 no.3, 2010년, pp.257 - 263
신현세 (단국대학교 파이버시스템공학과) , 유주환 (단국대학교 파이버시스템공학과) , 김로 (단국대학교 파이버시스템공학과)
Oil-absorbable nonwovens were produced by meltblown processing of polypropylene chips. In this study, experimental array and variance analysis of the design of experiment were used to increase the field repeatability and universality. Oil absorbency was decreased, as oil absorbable nonwovens of pack...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
기름유출사고 시 유흡착포를 이용해 기름을 회수하기 위해서 어떤 조건을 만족하는 유흡착포를 사용해야 하는가? | 셋째는 유흡착재인 유흡착포를 이용한 기름 회수방법이다. 유흡착포는 물을 배척하고 기름을 흡수 및 흡착하는 성질을 가지며 부양성이 있는 물질로 만들어져야 하며 짧은 시간 내에 기름을 흡수할 수 있어야 하고 회수와 취급이용이하여야 하며 충분한 강도를 지니고 있어야 한다. | |
현재 사용하는 기름유출사고 시 오염처리 방법은 어떤 종류로 대별되는가? | 이에 따라 기름유출사고 시 신속하고 효과적인 처리 방법이 필요하다. 현재 기름유출사고 시 오염처리 방법은 생물법, 화학법 및 물리법의 3종으로 크게 분류되며 필요시 복합적으로 사용도 실시되고 있는 실정이다. | |
기름유출사고 시 오염처리 방법 중 생물법의 장단점은 무엇인가? | 기름을 분해할 수 있는 미생물을 활성화 시켜 오염지역의 유류를 분해한다. 화학적 유처리 방법에 비해 자연환경에 미치는 영향이 적고 최종적으로 물과 이산화탄소로 분해시켜 유출유의 독성이 감소되는 장점이 있으나 기름의 신속한 제거가 어려운 단점이 있다14). |
J. Whitfield, "How to Clean a Beach", Nature 422, pp.464-466, 2003.
Hiroshi Moriwaki, Shiori Kitajima, Masahiro Kurashima, Ayaka Hagiwara, Kazuma Haraguchi, Koji Shirai, Rensuke Kanekatsu, and Kenji Kiguchi, Utilization of Silkworm Cocoon Waste as a Sorbent for the Removal of Oil from Water, Journal of Hazardous Materials, 165, 266-270(2009).
Teik-Thye Lim and Xiaofeng Huang, "Evaluation of Kapok as a Natural Hollow Hydrophobicoleophilic Fibrous Sorbent for Oil Spill Cleanup", Chemosphere 66, pp.955-963, 2007.
B. Wu and M.H. Zhou, "Recycling of Waste Tyre Rubber into Oil Absorbent", Wast Management, pp.1-5, 2008.
Lin Hailan and Liao Jianhe, Preparation and Properties of NR Oil Absorption Composite, Rubber Industry(China), 7, 403-407(2007).
T. Shimizu and S. Koshiro, Effect of Cell Structure on Oil Absorption of Highly Oil Absorptive Polyurethane Foam for On-Site Use, Journal of Applied Polymer Science, 65, 179-186(1997).
Korean Industrial Standard, K1600:2005, 2005.
J. H. Song, "Quality Control", Young Sul Publisher, Seoul, pp.317-354, 1998.
Ishikawa, Kaoru, Fujimori, and Toshimi Kume, "Method of Experimental Design", Japan, pp. 153-155, 1972.
B. Majumdar and R. L. Shambaugh, Air Drag in Filaments in the Melt Blowing Process, J. Rheol., 34, 591(1990).
Y. M. Kim and H. G. Jeong, Effect of Meltblown Processing Conditions on the Physical Properties of Polypropylene Fiber Web Fabrics, J. Korean Fiber Society, 33(2), 107-115(1996).
H. Shim and S. C. Kim, Effect of Processing Factors on the Physical Properties of Meltblown Polypropylene Fiber Web Fabrics ( II ), J. Korean Fiber Society, 33(6), 492-498(1996).
H. Shin, J. Yoo, and L. Jin, Effect of Manufacturing Condition on the Properties of Oil-avsorbable Melt Blown Nonwoven, Textile Coloration and Finishing(J. Korean Soc. Dyers & Finishers), 21(6), 22-28(2009).
Miller, R.V. and J.S. Poindexter, "Strategies and Mechanisms for Field Research in Environmental Bioremediation", The American Academy of Microbiology, pp.1-20, 1996.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.