최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.35 no.12 = no.315, 2011년, pp.1383 - 1389
이현진 (한국에너지기술연구원 태양열지열센터) , 김종규 (한국에너지기술연구원 태양열지열센터) , 이상남 (한국에너지기술연구원 태양열지열센터) , 강용혁 (한국에너지기술연구원 태양열지열센터)
The current study focuses on the consistent analysis of heat transfer in multichannel volumetric solar receivers used for concentrating solar power. Changes in the properties of the absorbing material and channel dimensions are considered in an optical model based on the Monte Carlo ray-tracing meth...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
태양열 발전 기술이란? | 태양열 발전(concentrating solar power) 기술은 태양 복사 에너지를 고집광하여 만들어진 고온의 증기나 공기를 기존의 발전방식에 적용하는 재생에 너지 기술이다. (1) 공기를 활용하는 태양열 발전의 핵심 요소는 체적식 태양열 흡수기(volumetric solar receiver)이다. | |
흡수기의 역할은? | Fig.1 에서 보듯이 흡수기는 고집광태양 복사 에너지를 공기로 전달하는 열교환기의 역할을 한다. 흡수 소재는 높은 태양열 흡수율, 높은 열전도도, 열적 및 기계적 안정성, 내산화성, 내구성 등을 만족해야 한다. | |
흡수 소재로 주로 이용되는 소재는? | 또한, 공기가 잘 통과하면서 접촉 면적이 넓은 다공성 형태로 제작이용이해야 한다. 그래서, SiC(silicon carbide) 또는 SiSiC(silicon-infiltrated silicon carbide)가 주로 이용된다. (1~4) 제작 방법에 따라 포말(foam), 메쉬(mesh) 등 형태도 가능하지만, 다채널 형태로 제작하면 기존의 디젤 매연 저감 장치(diesel particulate filter)에 적용되는 압출성형 방법을 활용할 수 있는 장점이 있다. |
Romero-Alvarez, M. and Zarza, E., 2007, Handbook of Energy Efficiency and Renewable Energy, Taylor & Francis, Taylor & Francis, New York, Chapter 21.
Fend, T., Hoffschmidt, B., Pitz-Paal, R., Reutter, O. and Rietbrock, P., 2004, "Porous Materials as Open Volumetric Solar Receivers: Experimental Determination of Thermophysical and Heat Transfer Properties," Energy, Vol. 29, pp. 823-833.
Agrafiotis, C. C., Mavroidis, I., Konstandopoulos, A. G., Hoffschmidt, B., Stobbe, P., Romero, M. and Fernandez-Quero, V., 2007, "Evaluation of Porous Silicon Carbide Monolithic Honeycombs as Volumetric Receivers/Collectors of Concentrated Solar Radiation," Sol. Energ. Mat. Sol. C., Vol. 91, pp. 474-488.
Pitz-Paal, R., Hoffschmidt, B., Bohmer, M. and Becker, M., 1997, "Experimental and Numerical Evaluation of the Performance and Flow Stability of Different Types of Open Volumetric Absorbers under Non-Homogeneous Irradiation," Sol. Energy, Vol. 60, Nos. 3-4, pp. 135-150.
Xu, C., Song, Z., Chen, L, and Zhen, Y., 2011, "Numerical Investigation on Porous Media Heat Transfer in a Solar Tower Receiver," Renew. Energ., Vol. 36, pp. 1138-1144.
Carotenuto, A., Ruocco, G. and Reale, F., 1991, "Heat Exchange in a Multi-Cavity Volumetric Solar Receiver," Sol. Energy, Vol. 46, No. 4, pp. 241-248.
Carotenuto, A., Reale, F., Ruocco, G., Nocera, R. and Bonomo, F., 1993, "Thermal Behavior of a Multi- Cavity Volumetric Solar Receiver: Design and Tests Results," Sol. Energy, Vol. 50, No. 2, pp. 113-121.
Carcia-Casals, X. and Ajona, J. I., 1999, "The Duct Selectivity Volumetric Receivers: Potential for Different Selectivity Strategies and Stability Issues," Sol. Energy, Vol. 67, Nos. 4-6, pp. 265-286.
Bai, F., 2010, "One Dimensional Thermal Analysis of Silicon Carbide Ceramic Foam Used for Solar Air Receiver," Int. J. of Therm. Sci., Vol. 49, pp. 2400-2404.
Siegel, R. and Howell, J. R., 2002, Thermal Radiation Heat Transfer, 4th ed., Taylor & Francis, New York, pp. 371-390.
Byun, D. Y., Lee, C. J. and Chang, S. Y., 2004, " Radiative Heat Transfer in Discretely Heated Irregular Geometry with an Absorbing, Emitting, and Anisotropically Scattering Medium Using Combined Monte-Carlo and Finite Volume Method," Trans. of the KSME(B), Vol. 28, No. 5, pp. 580-586.
Lee, H. J., Kim, J. K., Lee, S. N. and Kang, Y. H., 2011, "Concentrated Solar Flux Modeling for the Heat Transfer Analysis of Multi-Channeled Solar Receivers," J. of the KSES, in press.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.