최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓土木學會論文集, Journal of the Korean Society of Civil Engineers. A. 구조공학, 원자력공학, 콘크리트공학, v.31 no.2A, 2011년, pp.121 - 127
정상엽 (연세대학교 토목환경공학과) , 김영진 (연세대학교 토목환경공학과) , 윤태섭 (연세대학교 토목환경공학과) , 전현규 (GS건설(주) 기술연구소)
Spatial distribution of void space in concrete materials strongly affects mechanical and physical behaviors. Therefore, the identification of characteristic void distribution helps understand material properties and is essential to estimate the integrity of material performance. The 3D micro CT (X-r...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
경량 콘크리트는 어떻게 구분되는가? | 경량 콘크리트는 이런 결함들을 개선함과 동시에 여러 우수한 성능을 부여할 목적에 의해경량 골재 등을 사용하여 제조된 콘크리트이다. 경량 콘크리트는 제조 방법에 따라 일반적으로 비중이 낮은 다공질의경량 골재를 사용한 경량 골재 콘크리트, 콘크리트 내부에 무수한 기포를 골고루 형성시킨 경량 기포 콘크리트, 그리고 골재 사이에 공극을 형성시키기 위하여 잔골재의 사용을 배제한 무 잔골재 콘크리트의 3가지로 구분된다(한국콘크리트 학회, 2005). 본 논문에서는 3가지 중, 경량 골재를 사용한 경량 골재 콘크리트를 연구 대상으로 살펴보았다. | |
콘크리트 내부 공극으로는 어떤 것들이 있는가? | 콘크리트는 다공질 재료이기 때문에 육안으로 보이는 재료 표면의 공극 이외에도 재료 내부에 많은 공극이 존재한다. 콘크리트 내부 공극으로는 콘크리트 타설 과정에서 발생하는 공극과 갇힌 공기와 연행공기에 의한 공극, 그리고 골재 자체 등에 포함되어 있는 공극이 있다. 콘크리트 내부에 존재하는 공극은 직접 관찰하기 어렵기 때문에, 그 크기 및 분포 상태를 파악하는 것은 쉽지 않다. | |
X-ray microtomography는 어떤 방법인가? | 본 연구에서는 육안으로 보이지 않는 콘크리트, 특히 공극이 다량 존재하는 경량 콘크리트 내부를 관찰하기 위해서 micro CT(X-ray microtomography)를 활용하여 경량 콘크리트 내부의 구조를 살펴보았다. Micro CT는 X-ray 단층 촬영 기법으로서, 3차원 대상의 단면을 생성하기 위해 X-ray를 사용하는 방법이다. Micro CT를 사용하면 3차원 대상의 원형에 손상을 가하지 않고 마이크로(micro) 단위의 픽셀(pixel) 크기를 가진 단면 이미지를 얻을 수 있다. |
김용직, 최연왕, 문한영(2005) 경량굵은골재 밀도에 따른 자기충전콘크리트의 배합설계, 대한토목학회논문집, 대한토목학회, 제25권, 제2A호, pp. 455-462.
한국콘크리트학회(2005) 최신 콘크리트공학, 기문당, 한국콘크리트학회.
Chung. S.-Y. and Han, T.-S. (2010) Reconstruction of random twophase polycrystalline solids using low-order probability functions and evaluation of mechanical behavior, Comput. Mater. Sci., Elsevier, Vol. 49, pp. 705-719.
Coker, D.A. and Torquato, S. (1995) Extraction of morphological quantities from a digitized medium, J. Appl. Phys., American Institute of Physics, Vol. 77, pp. 6087-6099.
Corson, P.B. (1974) Correlation functions for predicting properties of heterogeneous materials. I. experimental measurement of spatial correlation functions in multiphase solids, J. Appl. Phys., American Institute of Physics, Vol. 45, pp. 3159-3164.
Dorey, R.A., Yeomans, J.A., and Smith, P.A. (2002) Effect of pore clustering on the mechanical properties of ceramics, J. Eur. Ceram. Soc., Elsevier, Vol. 22, pp. 403-409.
Gokhale, A.M., Tewari, A., and Garmestani, H. (2005) Constraint on microstructural two-point correlation functions, Scr. Mater., Elsevier, Vol. 53, pp. 989-993.
Han, T.-S. and Dawson, P.R. (2005) Representation of anisotropic phase morphology, Modelling Simul. Mater. Sci. Eng., IOP Publishing, Vol. 13, pp. 203-223.
Lin, S., Garmestani, H., and Adams, B. (2000) The evolution of probability functions in an inelasticly deforming two-phase medium, Int. J. Solids Struct., Elsevier, Vol. 37, pp. 423-434.
Lu, B. and Torquato, S. (1992) Lineal-path function for random heterogeneous materials, Phys. Rev. A, American Physical Society, Vol. 45, pp. 922-929.
Singh. H., Gokhale, A.M., Lieberman, S.I., and Tamirisakandala, S. (2008) Image based computations of lineal path probability distributions for microstructure representation, Mater. Sci. Eng. A, Elsevier, Vol. 474, pp. 104-111.
Tewari, A., Gokhale, A.M., Spowart, J.E., and Miracle, D.B. (2004) Quantitative characterization of spatial clustering in threedimensional microstructures using two-point correlation functions, Acta Mater., Elsevier, Vol. 52, pp. 307-319.
Torquato, S. (2002) Random heterogeneous materials, Springer, New York.
Underwood, E. (1970) Quantitative stereology, Addison-Wesley, Massachusetts.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.