최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국세라믹학회지 = Journal of the Korean Ceramic Society, v.48 no.2, 2011년, pp.160 - 167
조경식 (금오공과대학교 신소재시스템공학부) , 이현권 (금오공과대학교 신소재시스템공학부) , 권정철 (제일윈텍(주))
Plasma sprayed ceramic coatings inherently contain pores and usually also cracks. Post-treatment of the plasma sprayed coatings is a way to close the connected pores and cracks. In this study, post-sealing treatment in plasma sprayed
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
미세구조 결함의 단점은? | 6) 미세구조적 결함은 열린 기공, 닫힌 기공 및 수직 균열이며, 피막 외부 환경과 내부 모재와 연결되는 통로 역할을 하게 된다. 따라서 결함은 부식성 분위기 가스, 액체에 매우 취약하고, 기계적 응력이 가해지면 결합력 약화 현상이 나타남에 따라 피막의 단락 현상이 증가되고, 전기 절연 측면에서는 기공이 통로 역할을 함으로써 전기 절연성을 낮게 하는 주원인이 되고 있다. 이와 같이 미세구조 결함은 산업 제품개발에 있어 개선해야 하는 문제로 대두 되고 있다. | |
용사코팅이란? | 용사코팅(thermal spray coating)은 고온의 열원을 이용하여 다양한 원재료를 용융 또는 반용융의 상태로 변화시키고 고속으로 기재에 충돌하게 함으로서 용융된 입자는 상대적으로 낮은 온도의 기재에서 급속응고 되는 형태로 적층이 되며 이러한 적층된 구조로서 피막화 시키는 방법이다. 대표적인 특징은 비교적 빠른 시간에 두꺼운 피막을 얻을 수 있고 피막에 적용되는 재료가 매우 다양하다는 것이다. | |
표면개질 방법은? | 표면개질의 분야에서 피막 형성 방법과 개발된 재료의 적용으로 인해 표면개질 기술이 매우 다양하게 발전하고 있다. 표면개질 방법으로는 전기도금, 화학증착, 물리증착,육성용접(hard facing), 이온증착, 용사코팅 등이 적용 되고 있다.1-3) |
A. H. Seok and C. H. Lee, “A Study on the Wear Behavior of Plasma Sprayed WC-12% Co/NiCrSiB Mixed Coating,” J. Kor. Inst. Met & Meter., 36 [6] 943-51 (1998).
B.-Y. Kim, D. Y. Lee, Y.-N. Kim, M.-S. Jeon, J. K. Song, S. Y. Kim, and K. Y. Kim, “Effect of Al Alloy Composition on Physical and Crystallographical Properties of Plasma Electrolytic Oxidized Coatings. I. Physical Properties of PEO Layer(in Korean),” J. Kor. Ceram. Soc., 47 [3] 256-61 (2010).
B.-Y. Kim, D. Y. Lee, M. C. Shin, H.-G. Shin, B.-K. Kim, S. Y. Kim, and K. Y. Kim, “Effect of Al Alloy Composition on Physical and Crystallographical Properties of Plasma Electrolytic Oxidized Coatings II. Crystallographic Analysis of PEO Layer(in Korean),” J. Kor. Ceram. Soc., 47 [4] 283-89 (2010).
L. Pawlowsky, The Science and Engineering of Thermal Spray Coatings; pp. 28-52, John Wiley & Sons, New York, 1995.
S. Sampath, H. Herman, and S. Rangaswamy, pp. 48 in Proc. of 1st National Thermal Spray Conf., Orlando, 1987.
H. L. Filmer, J. Hochstrasser, A. R. Nicoll, and S. Rangaswamy, “Plasma Spray Deposition of Alumina-Based Ceramic Coatings,” Am. Ceram. Soc. Bull., 69 [12] 1955-58 (1990).
T. C. Willis, J. White, R. M. Jordan, and I. R. Hyghes, pp. 21 in 3rd Inter. Conf. on Solidification Processing, Sheffield, U.K., 1987.
R. A. Pike, V. M. Patarini, R. Zatorski, and F. P. Lamm, “Plasma-sprayed Coatings as Adherend Surface Pretreatments,” Inter. J. Adhesion and Adhesives, 12 [4] 227-31 (1992).
J. Carr and J. Jones, pp. 43 in Post Densified $Cr_2O_3$ Coatings for Adiabatic Engine, Kaman Science. Corp. 1990.
B. Kubota, “Decomposition of Higher Oxide of Chromium Under Various Pressures of Oxygen,” J. Am. Ceram. Soc., 44 [5] 239-48 (1961).
K. W. Jzwiak, W. lgnaczak, D. Dominiak, and T. P. Maniecki, “Thermal Stability of Bulk and Silica Supported Chromium Trioxide,” Appl. Catal. A, 253 33-45 (2004).
A. Rahman, M. H. Mohamed, M. Ahmed, and A. M. Aitami, “Characterization of Chromia/Alumina Catalysts by X-ray Photoelectron Spectroscopy, Proton Induced X-ray Emission and Thermogravimetric Analysis,” Appl. Catal. A, 121 203-16 (1995).
F. R. Feret, D. Roy, and C. Boulager, “Determination of Alpha and Beta Alumina in Ceramic Alumina by X-ray Diffraction,” Spectrochem. Acta B, 55 1051-61 (2000).
Y. K. Park, G. S. Choi, and D. H. Lee, “Effects of Spraying Conditions on the Porosity and Hardness of Plasma Sprayed MgO Stabilized Zirconia Thermal Barrier Coatings,” Kor. J. Mater. Res., 2 [2] 85-94 (1992).
J. R. Davis, pp. 45 in Handbook of Thermal Spray Technology, ASM International, Ohio, USA, 2004.
H. Kim, S. Odoul, C. H. Kim, and Y. G. Kwon, “Electrical Insulation Properties of the Plasma Sprayed Ceramic Coatings,” J. Kor. Inst. Met & Meter., 39 [3] 321-27 (2001).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.