최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기멤브레인 = Membrane Journal, v.21 no.4, 2011년, pp.367 - 376
박성률 (한국화학연구원 그린화학연구단 환경자원연구센터) , 안효성 (한국화학연구원 그린화학연구단 환경자원연구센터) , 김정훈 (한국화학연구원 그린화학연구단 환경자원연구센터)
Huge amount of
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
바이오가스를 분리정제하는 공정에는 어떠한 것들이 있는가? | 이러한 바이오가스를 분리정제하는 공정에는 흡수법 (absorption), 흡착법(adsorption), 심냉법(cryogenics), 그리고 막분리법(membrane) 등이 있다. 이중 흡수공정의 경우 기술의 성숙도가 가장 높으며, 특히 물 흡수법의 경우 이미 스웨덴 등 많은 나라들이 바이오가스의 정제에 사용하고 있고 미국의 경우 바이오가스를 정제하는 흡착공정이 상용화 중에 있다. | |
폴리이서설폰의 선택도 및 투과도는 어떠한가? | 상용화된 고분자 중 폴리이서설폰은 230°C의 높은 유리전이 온도를 지니고 있어 열에 안정하며 술포닐기 양쪽에 배치된 벤젠고리에 의해 전자의 이동이 용이하므로 바이오가스 내에 미량 포함되어 있는 H2S에 대해서도 화학적으로도 매우 안정하다. 또한 고분자의 구조상 매우 견고하여 산소/질소 및 이산화탄소/메탄의 선택도가 뛰어날 뿐만 아니라 이산화탄소의 투과도 및 가 소화 저항성이 우수한 것으로 알려져 있다[19,20]. 하지만 폴리이서설폰의 높은 산소/질소 선택도에도 불구하고 낮은 투과도로 인하여 상용화되지 못하였고, 제조 조건, 온도, 압력, 농도 및 stage-cut 등의 운전 조건에 따른 연구가 일부만이 이루어졌다[21]. | |
폴리이서설폰의 화학적 특성은 어떠한가? | 상용화된 고분자 중 폴리이서설폰은 230°C의 높은 유리전이 온도를 지니고 있어 열에 안정하며 술포닐기 양쪽에 배치된 벤젠고리에 의해 전자의 이동이 용이하므로 바이오가스 내에 미량 포함되어 있는 H2S에 대해서도 화학적으로도 매우 안정하다. 또한 고분자의 구조상 매우 견고하여 산소/질소 및 이산화탄소/메탄의 선택도가 뛰어날 뿐만 아니라 이산화탄소의 투과도 및 가 소화 저항성이 우수한 것으로 알려져 있다[19,20]. |
M. Mulder, "Basic principal of membrane technology", 2nd edition, pp. 313-321, Kluwer Academic Publishers, The Netherlands (2003).
Davis Guggenheim, "An inconvenient truth", Documentary film, Lawrence Bender Productions, U.S.A. (2006).
Korea Energy Management Corporation, "Review of global technology for climate change", Seminar for greenhouse gas reduction, February 14, Daejeon, Korea (2007).
U. S. Environmental Protection Agency, "Global Anthropogenic Emissions of Non- $CO_2$ Greenhouse Gases 1990-2020", Office of atmospheric programs climate change division, U.S.A. (2006).
S. Cavenati, C. A. Grande, and A. E. Rodrigues, "Upgrade of Methane from Landfill Gas by Pressure Swing Adsorption", Energy & Fuels, 19, 2545 (1993).
M. Yang and T. Kerr, "International Methane Partnership Fighting Climate Change", International Energy Agency, France (2007).
Ministry of Environment, "Master plan on action for climate change", (2008).
R. E. Buxbaum and T. L. Marker, "Hydrogen transport through non-porous membranes of palladium- coated niobium, tantalum and vanadium", J. Membr. Sci., 85, 29 (1993).
G. Kastros, T Stergiopoulos, I. M. Arabatiz, G. K. Papadokostaki, and P. Falaras, "A solvent-free polymer/ inorganic oxide electrolyte for high efficiency solid-state dye-sensitized solar sells", J. Photochemical Photobiology, 149, 191 (2002).
J. M. Carrasco, J. T. Bialasiewicz, R. C. P. Guisado, and J. I. Leon, "Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A Survey", IEEE Transactions on Industrial Electronics, 53, 1002 (2006).
J. P. Ciferno, T. E. Fout, A. P. Jones, and J. T. Murphy, "Capturing carbon from existing coalfired power plant", Chem. Eng. Prog., April, 33 (2009).
E. Drioli and M. Romano, "Progress and new perspectives on integrated membrane operations for sustainable industrial growth", Ind. Eng. Chem. Res., 40, 1277 (2001).
M. Simmonds, P. Hurst, M. B. Wilkinson, C. Watt, and C. A. Roberts, "A study of very large scale post combustion $CO_2$ capture at a refining & petrochemical complex", 6th International Conference on Green house Gas control Technology, October 1, Kyoto, Japan (2002).
M. J. Tuinier, M. van Sint Annaland, G. J. Kramer, and J. A. M. Kuipers, "Cryogenic $CO_2$ capture using dynamically operated packed beds", Chem. Eng. Sci., 65, 114 (2010).
L. I. Eide, M. Anheden, A. Lyngfelt, C. Abanades, M. Younes, D. Clodic, A. A. Bill, P. H. M. Feron, A. Rojey, and F. Giroudiere, "Novel capture processes", Oil & Gas Science & Technology, 60, 497 (2005).
S. Alexander Stern, "Polymers for gas separations: the next decade", J. Membr. Sci., 94, 1 (1994).
J. Hao and P. A. Rice, "Upgrading low-quality natural gas with $H_{2}O$ - and $CO_{2}$ -selective polymer membranes: Part II. Process design, economics, and sensitivity study of membrane stages with recycle streams", J. Membr. Sci., 320, 108 (2008).
A. F. Ismail and N. Yaacob, "Performance of treated and untreated asymmetric polysulfone hollow fiber membrane in series and cascade module configurations for $CO_{2}/CH_{4}$ gas separation system", J. Membr. Sci., 275, 151 (2006).
Y. Li, C. Cao, T. S. Chung, and K. P. Pramoda, "Fabrication of dual-layer polyethersulfone (PES) hollow fiber membranes with an ultrathin dense-selective layer for gas separation", J. Membr. Sci., 245, 53 (2004).
M. Mulder, "Basic Principles of Membrane Technology", 1st edition, pp. 138-147, Kluwer Academic Publishers, The Netherlands (1996).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.