최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기설비공학논문집 = Korean journal of air-conditioning and refrigeration engineering, v.23 no.2, 2011년, pp.111 - 119
정석권 (부경대학교 냉동공조공학과) , 변종영 (부경대학교 냉동공조공학과) , 김상호 (부경대학교 냉동공조공학과) , 윤정인 (부경대학교 냉동공조공학과)
Recently, the performances of speed and accuracy are enhanced in machine tools. The high speed of the machine tools usually causes harmful thermal displacements on the objects. To reduce the thermal displacements, machine tools generally adopt oil coolers with precise temperature control function. T...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
오일쿨러란? | 오일쿨러는 공작기계의 공작물 가공 부위에서 발생하는 열 부하를 오일을 이용하여 냉각시키는 장치이다. 최근의 공작기계는 절삭속도 20,000 rpm, 이송 속도 120 m/min 등 매우 고속으로 가동되기 때문에 공작물의 가공 부위에 상당한 열이 발생한다. | |
오일쿨러의 사용 목적은? | (1) 열은 공작기계의 특정 부품과 공작물의 열 변형을 초래하고 이로 인해 공작물의 가공 정밀도와 공작기계의 신뢰성이 저하된다. 따라서 공작기계에서의 과도한 발열을 억제, 가공 정밀도를 향상시키기 위해 공작기계의 가공 부위에 냉각된 오일을 공급하는 오일쿨러가 필수적이다. 오일쿨러의 출구 오일 온도가 일정할 경우, 공작 과정에서의 공작물의 열변형을 방지할 수 있다. | |
압축기의 on-off 제어 방식의 단점은 무엇인가? | 오일쿨러에 가장 널리 사용되고 있는 제어는 압축기의 on-off 제어 방식이다. 이 방식은 정교한 온도 제어가 어렵고, 빈번한 기동 및 정지 동작으로 소비전력이 증가하며, 압축기의 수명이 단축되는 단점이 있다. 보다 정밀한 온도 제어 방식으로는 핫가스 바이패스(Hot-gas Bypass; HB) 방식과 압축기 가변속 제어 방식이 있다. |
Lee, S. W., Yeom, H. K. and Park, K. J., 2009, Performance of Hot Gas Bypass Type Oil Cooler System, Journal of Korean Society for Precision Engineening, Vol. 26, No. 3, pp. 73- 80(in Korean).
Beak, S. M., Choi, J. H., Byun, J. Y., Moon, C. G., Lee, H. S., Jeong, S. K., and Yoon, J. I., 2009, Characteristics of Temperature Control by Hot-gas Bypass Flow Rate on Industrial Water Cooler, Journal of the Korean Society of Marine Engineering, Vol. 33, No. 8, pp. 1129- 1136(in Korean).
Lee, S. W. and Yeom, H. K., 2008, Performance of Thermal Error Controller to Minimize Thermal Deformation of Machine Tools, Journal of Korean Society for Precision Engineening, pp. 376-380(in Korean).
Li, H., You, S. S., Yoon, J. I., and Jeong, S. K., 2008, An Empirical Model for Independent Control of Variable Speed Refrigeration System, Applied Thermal Engineering, Vol. 28, pp. 1918-1924.
Li, H., You, S. S. and Jeong, S. K., 2008, Feedforward Control of Capacity and Superheat for a Variable Speed Refrigeration System, Applied Thermal Engineering, Vol. 29, pp. 1067- 1074.
Beak, S. M., Moon, C. G., Kim, H. W., Jeong, S. K., and Yoon, J. I., 2010, Characteristics of Capacity Control of Variable Speed Water Cooler with the Electronic Expansion Valve Open/ Close Degree, Journal of the Korean Society of Marine Engineering, Vol. 34, No. 2, pp. 282- 288(in Korean).
Yeom, H. K. and Lee, S. W., 2008, Performance Test of Gasby-pass Type Thermal Error Controller, ICCAS.
Ahn, J. H., Joo, Y. J., Cho, I. Y., Kang, H., Kim, Y. C., and Choi, J. M., 2009, An Experimental Study on the Performance Characteristics of a Heat Pump System in the Heating Operation Mode with the Hot Gas Bypass, SAREK, pp. 539-543.
Yaqub, M., Zubair, S. M. and Jameel-ur-Rehman Khan, 2000, Performance Evaluation of Hot-gas Bypass Capacity Control Scheme for Refrigeration and Air-conditioning Systems, Energy, Vol. 25, pp. 543-561.
Yaqub, M., Zubair, S. M. and Khan, S. H., 1995, Second-law-based Thermodynamic Analysis of Hot-gas Bypass, Capacity-control Schemes for Refrigeration and Air-conditioning Systems, Energy, Vol. 20, No. 6, pp. 483-493.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.