최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기비파괴검사학회지 = Journal of the Korean Society for Nondestructive Testing, v.31 no.1 = no.123, 2011년, pp.53 - 61
윤현성 (한양대학교 기계공학과 대학원) , 최낙삼 (한양대학교 기계공학과)
Edge notched A16061-T6 aluminum was repaired with a GFRP composite patch as a function of the number of stacking, Damage progress of specimen for tension load has been monitored by acoustic emission(AE), AE energy rate, hit rate, amplitude, waveform and 1st peak frequency distribution were analyzed....
C. L. Ong, R. C. Chu, T. C. Ko and S. B. Shen, "Composite patch reinforcement of cracked aircraft upper longeron : analysis and specimen simulation," Theoretical and Applied Fracture Mechanics, Vol. 14, No. 1, pp. 13-26 (1990)
S. Naboulsi and S. Mall, "Characterization of fatigue crack growth in aluminum panels with a bonded composite patch," Composite Structure, Vol. 37, No. 3-4, pp. 321-334 (1997)
Hossein Hosseini Toudeshky, Bijan Mohammadi and Hamid Reza Daghyani, "Mixed-mode fracture analysis of aluminum repaired panels using composite patches," Composites Science and Technology, Vol. 66, No. 2, pp. 188-198 (2006)
Jean Denis Mathias, Xavier Balandraud and Michel Grediac, "Applying a genetic algorithm to the optimization of composite patches," Computers and Structures, Vol. 84, No. 12, pp. 823-834 (2006)
D. Quinas, B. Bachir Bouiadjar, B. Achour and N. Benderdouche, "Modelling of a cracked aluminum plate repaired with composite octagonal patch in mode I and mixed mode," Material and Design, Vol. 30, No. 3, pp. 590-595 (2009)
C. T. Sun, J. Klug and C. Arendt, "Analysis of cracked aluminum plates repaired with bonded composite patch," AIAA Journal, Vol. 34, No. 2, pp. 369-375 (1996)
Turaga V. R. S. Umamaheswar and Ripudaman Singh, "Modelling of a patch reapir to a thin cracked sheet," Engineering Fracture Mechanics, Vol. 62, No. 203, pp. 267-289 (1999)
F. Findik and H. Unal, "Development of thermal residual strain in a single sided composite patch," Composite Part B: Engineering, Vol. 32, No. 4, pp. 379-383 (2001)
P. Colimbi, A. Bassetti and A. Nussbauber, "Delamination effects on cracked steel members reinforced by prestressed composite patch," Theoretical and Applied Fracture Mechanics, Vol. 39, No. 1, pp. 61-71 (2003)
김위대, "복합재 패치를 이용한 노후 항공기의 중앙균열 보수에 관한 연구", 한국항공우주학회지, Vol. 27, No. 8, pp. 71-78 (1999)
정기현, 양원호, 김철, "경사균열을 갖는 복합재료 보강판의 피로균열 성장에 관한 연구", 대한기계학회지 A권, Vol. 25, No. 12, pp. 2091-2099 (2001)
A. Chukwujekwu Okafor, Navdeep Singh and Navrag Sinph, "Acoustic emission detection and prediction of fatigue crack propagation in composite patch repairs using neural networks", American Institute of Physics, pp. 1532-1539 (2007)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.